home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1997 April (Special)
/
Chip-Special_1997-04_cd.bin
/
spea
/
mmedia
/
xtcw95
/
xtcw95_3.exe
/
Readme.txt
< prev
next >
Wrap
Text File
|
1995-11-08
|
24KB
|
472 lines
Die deutsche Version der Readme finden Sie im Anschluß an die englische
Version der Readme !
*******************************************************************
* *
* Drivers and Applications *
* *
* for *
* *
* SPEA MEDIA XTC *
* *
* Drivers for WINDOWS 3.1x 1095.1 *
* Drivers for WINDOWS 95 1195.2 *
* Super JAM! Jr. 1.0 *
* *
* SPEA Software AG Rel.: 1195.2 *
*******************************************************************
This README file contains the following information:
A) Notes and known problems
B) Corrections to the manual
C) Windows 95
D) Information about Super Jam! Jr.
A) Notes and knows problems
Please also read the notes in Appendix B - Troubleshooting in the Hardware
User manual.
Installation of the Windows 3.1x driver
Important!
Different to the manual the Intel ICU Plug & Play Utility is NOT delivered
with the SPEA MEDIA XTC. The configuration and installation of the
soundboard can now be executed under DOS / Windows 3.1x also without Plug &
Play functionality (without ICU Utility and without Plug & Play BIOS in the
system).
In this case, the configuration of the I/O addresses, Interrupts and DMA
channels can be done by the SSINIT utility, which you can find in the
installation directory (in general C:\SPEA\MEDIAXTC).
Start SSINIT under DOS without any parameter. Select the Option `Advanced'.
In the following you can change the settings of the board in the menu
option `Hardware'.
If you have installed a mouse driver under DOS, you can comfortably make
the selections with the mouse.
If you don't want to make the hardware settings on your own, you should
install the Intel ICU Plug & Play Utility on your system before you install
the board. The program can be obtained by your local dealer. The
configuration of the SPEA MEDIA XTC then will be executed automatically by
this program.
Please note, that without an installed Plug & Play fuctionality the SPEA
MEDIA XTC will be set to the default values I/O=330, DMA=1, IRQ=9 and
IRQ=5. Perhaps conflicts with other system components may occur with these
settings.
Q: After the SPEA MEDIA XTC Windows 3.1x driver installation the system
reboots. During the booting process the system crashes while executing
the program SSINIT.
A: You have installed your SPEA MEDIA XTC without having installed a Plug &
Play Utility on your system and with the default I/O addresses, DMA
channel or Interrputs conflicts occur between the SPEA MEDIA XTC and
other system components.
Boot your system without starting SSINIT (e.g. with a DOS boot disk or
by pressing the F8 key while booting and confirming each executable
command separately).
Change to the installation directory (in general C:\SPEA\MEDIAXTC).
Start SSINIT without any parameter and select the option `Advanced'. Now
you can configure the settings of the soundboard in the `Hardware' menu.
May be that you have to enter the following commands before you start
SSINIT:
SET BLASTER=A220 1xx Dx T1
SET SNDSCAPE=C:\SPEA\MEDIAXTC
Alternatively you can edit the file SNDSCAPE.INI directly:
Open the file SNDSCAPE.INI -which you will find in the installation
directory - with an editor (e.g. the DOS-Editor EDIT) and change the
parameter values of IRQ, SBIRQ and DMA corresponding to your
requirements. For possible values for Interrupts and DMA channels please
refer to the SPEA MEDIA XTC hardware manual in Appendix C - Technical
Data.
Q: Different to the manual the installation doesn't offer the option for a
volume level control to be installed in the AutoStart group. The Level
Control Utility will not be installed.
A: Different to the description in the manual in Part 2 - Installing the
SPEA MEDIA XTC, the Level Control Utility is not supplied and installed
with the soundboard, as there are compatibility problems with Windows
95.
Q: The diagnostic Utility S2KSTAT - described in the manual in Part 3 -
Configuration of the SPEA MEDIA XTC is not executable. It terminates
with an error message.
A: To get use of the diagnostic Utility S2KSTAT you have to add the
following line to the file SNDSCAPE.INI.
CodeFile=SNDSCAPE.C03
Now you can use the program.
Q: The SPEA MEDIA XTC can not be installed under Windows 95 as described.
Either the board cannot be detected by the system or the driver tells
(in the Windows 95 device manager) that actually there are no conflicts
but that the board is not ready for use or that the driver installation
is incomplete.
A: In such a case the Plug & Play functionality under Windows 95 is
seriously disrupted. This most likely occurs with an elder or a
defective System BIOS. Contact your local dealer or the motherboard
manufacturer and ask for a System BIOS update.
Q: Windows 95 or the SPEA MEDIA XTC Windows 95 driver reports a conflict
between the SPEA MEDIA XTC and another installed device.
A: Eventually Windows 95 has not recognized the Ensoniq Soundscape chip set
of the SPEA MEDIA XTC due to an error with the Plug & Play functionality
and therefore installs the Soundboard as an unknown device. Remove the
unnknown devices and the SPEA MEDIA XTC entries with the device manager
of Windows 95. Restart Windows 95 and follow the instructions of Windows
95, in case that it requires driver disks.
Q: After a -as it seems- successful installation of the SPEA MEDIA XTC
Windows 95 driver the network card, the mouse or another device does not
work propely any more.
A: These problems can have several reasons:
- An elder Plug & Play BIOS or one that is incompatible to Windows 95
can cause the described effect. After you update the BIOS, the problem
should be solved.
- If your BIOS offers the possibility to mark IRQs as reserved, it may
be necessary that you mark the IRQs as reserved that are reserved by
ISA boards without Plug & Play functionality.
- May be that conflicts between different devices already occured before
the Installation of the SPEA MEDIA XTC. The devices could have worked
properly without any errors before, though the error has already been
existing. In the device manager check, if there are conflicts between
other devices and change the configuration of these devices.
Q: After a - as it seems - successful installation of the SPEA MEDIA XTC
Windows 95 driver the SPEA MEDIA XTC doen not work.
A: These problems can have several reasons:
- An elder Plug & Play BIOS or one that is incompatible to Windows 95
can cause the described effect. After you update the BIOS, the problem
should be solved.
- If your BIOS offers the possibility to mark IRQs as reserved, it may
be necessary that you mark the IRQs that are reserved by ISA boards
without Plug & Play functionality as reserved.
- May be that conflicts between different devices already occured before
the Installation of the SPEA MEDIA XTC. The devices could have worked
properly without any errors before, though the error has already been
existing. In the device manager check, if there are conflicts between
other devices and change the configuration of these devices.
- In some cases it can be necessary to reconfigure the SPEA MEDIA XTC,
to select another Interrupt or DMA channel, though obvioulsy no
problem occurs. It may be that other components or their drivers
cause errors on Interrupts or DMA channels they actually don't
reserve. It may also be that a motherboard has problems with some
certain interrupts or DMA channels if a board is installed in an
expansion slot.
B) Corrections to the manual
P. 9 Installation via a Plug & Play System or Utility (ICU):
If you don't have a Plug & Play Utility (e.g. Intel's ICU) or Plug &
Play BIOS in your system, then you can also configure your SPEA
MEDIA XTC with the SSINIT Utility (without Plug & Play
functionality). Though it is adviced to purchase a Plug & Play
Utility at your local dealer or motherboard manufacturer.
P. 11 Internal Audio Connectors / Mitsumi CD (J5):
Different to the description and the illustration on page 10 the
Audio Connector J5 for a Mitsumi CD is not available on the SPEA
MEDIA XTC.
P. 13 Installation of the Software for DOS / Windows 3.1:
For compatibility reasons (with Windows 95) the Level Control
Utility described under item 6 is no longer part of the delivery
scope. This means also that there is no possibility for setting up
the Volume Level control in the Autostart group of Windows.
P. 14 Standard Modifications AUTOEXEC.BAT
The 2nd line which will be added to the AUTOEXEC.BAT now is:
SET SNDSCAPE=<directory>
The 3rd line is:
<directory>\SSINIT /I
P. 18 Description of the Options for the Hardware Settings:
The options of the Hardware Settings are only available for SSINIT,
if the SPEA MEDIA XTC is configured without Plug & Play
functionality, that means that Intel's ICU is not installed.
C) Windows 95
The SPEA MEDIA XTC is supplied with drivers for Windows 3.1x as well as
drivers for Windows 95. Please use the drivers that fit to your operating
system. The drivers are available on the supplied disk or on the Media
Gallery CD Edition Nr. 12/95 upwards.
The supplied applications Super JAM! Jr. and Recording Session Plus can be
used under Windows 3.1x and under Windows 95.
D) Notes to Super JAM! JR. from the Blue Ribbon Soundworks
The Program SuperJAM! Jr. from The Blue Ribbon Soundworks is a powerful
program which makes it very easy to compose.
When you have successfully installed your Software you can get aware of the
program very easy with the available online help.
Installation of the Software:
1. Insert the Super JAM! Jr. Installation disk in the corresponding disk
drive.
2. Start Windows (if not already done)
3. Start the Software installation from the Program Manager with the
following call:
`File' `Run' A:\SETUP.EXE
4. Follow the instructions on the screen.
The program is copied onto your hard disk.
*******************************************************************
* *
* Treiber und Applikationen *
* *
* für *
* *
* SPEA MEDIA XTC *
* *
* Treiber für WINDOWS 3.1x 1095.1 *
* Treiber für WINDOWS 95 1195.2 *
* Super JAM! Jr. 1.0 *
* *
* SPEA Software AG Rel.: 1195.2 *
*******************************************************************
Diese Readme Datei enthält folgende Informationen:
A) Hinweise und bekannte Probleme
B) Änderungen zum Handbuch
C) Windows 95
D) Hinweise zu Super JAM! Jr.
A) Hinweise und bekannte Probleme
Beachten Sie bitte auch die Hinweise im Anhang B - Problemlösungen
des Handbuches.
Installation der Treiber für Windows 3.1x
Achtung: Anders als im Handbuch beschrieben, wird die MEDIA XTC nicht mehr
mit dem Intel ICU Plug & Play Utility ausgeliefert. Die Konfiguration und
Installation der SPEA MEDIA XTC kann jetzt unter DOS / Windows 3.1x auch
ohne Plug & Play-Funktionalität (ohne ICU Utility und ohne Plug & Play
BIOS im Rechner) ausgeführt werden.
Die Konfiguration der I/O Adressen, der Interrups und DMA-Kanäle erfolgt
in diesem Fall mit dem Utility SSINIT, das Sie im Installationsverzeichnis
(in der Regel ist dies C:\SPEA\MEDIAXTC) finden.
Starten Sie hierzu SSINIT unter DOS ohne Parameter. Wählen Sie die Option
'Advanced' aus, anschließend können Sie im Menü 'Hardware' die
Einstellungen der Karte ändern.
SSINIT können Sie bequem mit der Maus bedienen, wenn unter DOS ein Treiber
für Ihre Maus installiert ist.
Möchten Sie die Hardwareeinstellungen (I/O-Adresse, Interrupt und DMA-
Kanal) nicht selber vornehmen müssen, sollten Sie das Intel Plug and Play
Utility ICU vor der Installation der SPEA MEDIA XTC auf Ihrem PC
installieren. Sie erhalten dies von Ihrem PC Fachhändler. Die Konfiguration
der SPEA MEDIA XTC erfolgt dann automatisch durch das ICU Utility.
Beachten Sie bitte, daß bei einer Installation ohne installierte Plug &
Play Funktionalität die SPEA MEDIA XTC auf die Standardwerte I/O=330,
DMA=1 und IRQ=9 sowie IRQ=5 voreingestellt wird. Eventuell kann es mit
anderen Systemkomponenten zu Konflikten kommen.
F: Nach der Installation der Windows-Treiber der SPEA MEDIA XTC führt das
System einen Neustart durch. Während des Bootens stürzt das System beim
Ausführen von SSINIT ab.
A: Sie haben die SPEA MEDIA XTC installiert, ohne Plug & Play auf Ihrem
System installiert zu haben und mit der Standard I/O-Adressen, dem
Standard DMA-Kanal oder einer der Standard Interrupts kommt es zu einem
Konflik zwischen SPEA MEDIA XTC und einer anderen Komponente Ihres
Systems.
Booten Sie Ihr System, ohne daß SSINIT ausgeführt wird (z.B. mit einer
DOS Boot-Diskette oder indem Sie beim Booten die Taste F8 gedrückt
halten und die auszuführenden Befehle einzeln bestätigen).
Wechseln Sie in das Installationsverzeichnis (in der Regel ist dies
C:\SPEA\MEDIAXTC). Starten Sie SSINIT ohne Angabe von Parametern und
wählen Sie die Option 'Advanced' aus. Anschließend können Sie im Menü
'Hardware' die Konfiguration der SPEA MEDIA XTC entsprechen Ihres
Systems ändern. Gegebenenfalls müssen Sie vor dem Aufruf von SSINIT die
zwei folgenden Zeilen eigeben:
SET BLASTER=A220 Ixx Dx T1
SET SNDSCAPE=C:\SPEA\MEDIAXTC
Alternativ können Sie auch die Datei SNDSCAPE.INI direkt editieren:
Öffnen Sie die Datei SNDSCAPE.INI, die Sie im Installationsverzeichnis
finden, mit einem Editor (z.B. EDIT von MS-DOS) und verändern Sie die
Werte hinter den Parametern IRQ, SBIRQ und DMA entsprechend Ihren
Erfordernissen. Mögliche Werte für Interrupt und DMA-Kanäle entnehmen
Sie bitte dem Handbuch Anhang C - Technische Daten.
F: Anders als im Handbuch beschrieben, bietet die Installation der Treiber
für Windows 3.1x nicht die Option, einen Lautstärkeregler in der
Autostartgruppe zu installieren. Das Level Control Utility wird nicht
installiert.
A: Anders als im Handbuch unter Teil 2 - Installation der SPEA MEDIA XTC
beschrieben, wird das Level Control Utility aus Gründen der
Kompatibilit zu Windows 95 nicht mehr mit der SPEA MEDIA XTC
ausgeliefert und installiert.
F: Das im Handbuch unter Teil 3 - Konfiguration der SPEA MEDIA XTC
beschriebene Diagnose Utility S2KStat läßt sich nicht ausführen. Es
bricht mit einer Fehlermeldung ab.
A: Um das Utility S2KStat nutzen zukönnen, müssen Sie der Datei
SNDSCAPE.INI die folgende Zeile hinzufügen. Dann läßt sich S2KStat
nutzen.
CodeFile=SNDSCAPE.CO3
F: Unter Windows 95 läßt sich die SPEA MEDIA XTC nicht wie beschrieben
installieren.
Entweder Findet das System keine Karte oder der Treiber meldet (im
Windows 95 Gerätemanager) daß zwar keine Konflikte vorliegen, jedoch
das Gerät nicht betriebsbereit sei oder die Treiberinstallation
unvollständig sei.
A: In einem solchen Fall kommt es zu einer schweren Störung der Plug & Play
Funktionalität von Windows 95. In der Regel liegt dies an einem
verälteten oder fehlerhaften System-BIOS. Wenden Sie sich an Ihren PC
Fachhändler oder Motherboard-Hersteller und fragen diesen nach einem
BIOS-Update.
F: Windows 95 bzw. der Windows 95 Treiber der SPEA MEDIA XTC meldet einen
Konflikt zwischen der SPEA MEDIA XTC und einem anderen installierten
Gerät.
A: Eventuell hat Windows 95 durch eine Störung der Plug & Play
Funktionalität den Ensoniq Soundscape Chipsatz der SPEA MEDIA XTC
erkannt und als unbekanntes Gerät installiert. Entfernen Sie mit dem
Gerätemanager von Windows 95 die unbekannten Geräte und die SPEA MEDIA
XTC Einträge. Starten Sie Windows 95 neu und folgen Sie den Anweisungen
von Windows 95, falls es nach Treiberdisketten verlangt.
F: Nach der anscheinend problemlosen Installation der SPEA MEDIA XTC
Treiber für Windows 95 funktioniert die Netzwerkkarte, die Maus oder ein
anderes Gerät nicht mehr.
A: Ausfallserscheinungen anderer Geräte nach der Installation der SPEA
MEDIA XTC unter Windows 95 können verschiedene Gründe haben:
- Bei veralteten oder zu Windows 95 inkompatiblen Plug & Play BIOSen
kann es zu den beschriebenen Effekten kommen. Nach einem Update des
BIOSes ist das Problem meist behoben.
- Besitzt Ihr BIOS die Moglichkeiten IRQs als belegt zu markieren, ist
es möglicherweise notwendig, die durch ISA-Karten ohne Plug & Play
Funktionalität belegten IRQs im BIOS als belegt zu markieren.
- Eventuell bestanden schon vor der Installation der SPEA MEDIA XTC
zwischen verschiedenen Komponenten Konflikte. Einige Geräte können
eventuell auch trotz eines vorhandenen Konfliktes vor der
Installation der SPEA MEDIA XTC problemlos funktioniert haben.
Überprüfen Sie im Gerätemanager, ob eventuell Konflikte zwischen
Geräten vorliegen und ändern Sie die Konfiguration dieser Geräte.
F: Nach der anscheinend problemlosen Installation der SPEA MEDIA XTC
Treiber für Windows 95 funktioniert SPEA MEDIA XTC nicht.
A: Fehlfunktionen nach der Installation der SPEA MEDIA XTC unter Windows 95
können verschiedene Gründe haben:
- Bei veralteten oder zu Windows 95 inkompatiblen Plug & Play BIOSen
kann es zu diesem Fehlverhalten kommen. Nach einem Update des BIOSes
ist das Problem meist behoben.
- Besitzt Ihr BIOS die Moglichkeiten IRQs als belegt zu markieren, ist
es möglicherweise notwendig, die durch ISA-Karten ohne Plug & Play
Funktionalität belegten IRQs im BIOS als belegt zu markieren.
- Eventuell bestanden schon vor der Installation der SPEA MEDIA XTC
zwischen verschiedenen Komponenten Konflikte. Einige Geräte können
eventuell auch trotz eines vorhandenen Konfliktes vor der
Installation der SPEA MEDIA XTC problemlos funktioniert haben.
Überprüfen Sie im Gerätemanager, ob eventuell Konflikte zwischen
Geräten vorliegen und ändern Sie die Konfiguration dieser Geräte.
- In einigen Fällen kann es notwendig sein die SPEA MEDIA XTC auf eine
andere Konfiguration umzustellen und einen anderen Interrupt oder DMA-
Kanal zu wählen, obwohl anscheinend kein Konflikt vorliegt.
Es kann vorkommen, daß andere Komponenten oder deren Treiber Störungen
auf Interrupts oder DMA-Kanälen verursachen, die sie eigentlich nicht
belegen. Ebenso kann es vorkommen, daß ein Motherboard einfach auf
bestimmten Interrups oder DMA-Kanälen Probleme mit bestimmten
Steckkarten hat.
B) Änderungen zum Handbuch
S. 9 Installation über ein Plug & Play-System bzw. Utility (ICU):
Verfügen Sie auf Ihrem System nicht über ein Plug and Play Utility
(z.B. ICU von Intel) oder ein Plug & Play BIOS, dann können Sie
die SPEA MEDIA XTC auch über das SSINIT Utiliy (ohne Plug and Play
Funktionalität) konfigurieren.
Es wird allerdings empfohlen, daß Sie sich ein Plug and Play Utility
(z.B. ICU von Intel) von Ihrem PC Fachhändler oder Motherboard-
Hersteller besorgen.
S. 11 Interne Audioanschlüsse / Mitsumi CD (J5):
Anders als auf Seite 11 beschrieben und in der Zeichnung auf Seite
10 eingezeichnet ist der Audioanschluß J5 für Mitsumi CD auf der
SPEA MEDIA XTC nicht bestückt.
S. 13 Installation der Software für DOS/Windows 3.1:
Das unter 6. beschriebene Level Control Utility gehört aus Gründen
der Kompatibilität zu Windows 95 nicht mehr zum Lieferumfang.
Während der Installation gibt es daher auch keine Auswahl mehr, die
es ermöglicht das Level Control Utility in der Autostart Gruppe von
Windows einzurichten.
S. 14 Standardanpassungen / AUTOEXEDC.BAT
Die zweite Zeile, die in die AUTOEXEC.BAT Datei eingefügt wird,
heißt richtig:
SET SNDSCAPE=<Verzeichnis>
Die dritte Zeile, die in die AUTOEXEC.BAT Datei eingefügt wird,
heißt richtig:
<Verzeichnis>\SSINIT /I
S. 18 Beschreibung der Optionen der Hardware Einstellungen:
Die Optionen der Hardware Einstellungen stehen in SSINIT nur zur
Verfügung, wenn die SPEA MEDIA XTC ohne Plug & Play Funktionalität
Konfiguriert wird, d.h. Intels ICU nicht installiert ist.
C) Windows 95
Der SPEA MEDIA XTC liegen Treiber sowohl für Windows 3.1x als auch für
Windows 95 bei. Bitte verwenden sie die Ihrem Betriebsystem entsprechenden
Treiber. Sie finden diese auf den beiliegenden Disketten bzw. auf der
beiliegenden MediaGallery CD-ROM ab Ausgabe 12/95.
Die beiliegenden Applikationen Super JAM! Jr. und Recording Session Plus
können Sie sowohl unter Windows 3.1x als auch unter Windows 95 einsetzen.
D) Hinweise zu Super JAM! Jr. von The Blue Ribbon Soundworks
Das Program SuperJAM Jr. von The Blue Ribbon Soundworks ist ein
leistungsfähiges Programm mit dem sich spielend leicht komponieren läßt.
Sobald Sie die Software erfolgreich installiert haben, können Sie sich
mittels Online-Hilfe selbst schnell zurechtfinden.
Installation der Software:
1. Legen Sie die Super JAM! Jr. Installationsdiskette in das entsprechende
Laufwerk.
2. Starten Sie Windows (sofern noch nicht geschehen)
3. Starten Sie die Installation aus dem Programm-Manager mit dem Aufruf:
'Datei' 'Ausführen' A:\SETUP.EXE
4. Folgen Sie den Anweisungen am Bildschirm.
Das Programm wird auf Ihre Festplatte installiert.