home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 29 Fixes_o
/
29-Fixes_o.zip
/
xr_btk1.rm1
< prev
next >
Wrap
Text File
|
1995-11-22
|
9KB
|
215 lines
+=====================================================================+
| FixPax for IBM OS/2 Developer's Toolkit for OS/2 2.11 and Warp v3 |
| |
| First release 08/24/95 |
+=====================================================================+
IMPORTANT
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF
THE FOLLOWING TERMS AND CONDITIONS:
- YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE
OF IBM DEVELOPER'S TOOLKIT FOR OS/2 2.11 OR WARP V3
- YOU MAY MAKE COPIES OF IBM DEVELOPER'S TOOLKIT FOR OS/2 2.11
OR WARP V3 FIXPAK EQUAL TO THE NUMBER OF LICENSED COPIES OF
IBM DEVELOPER'S TOOLKIT FOR OS/2 2.11 OR WARP V3 YOU POSSESS
- YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PURPOSES
- ALL OTHER TERMS AND CONDITIONS OF YOUR IBM DEVELOPER'S
TOOLKIT FOR OS/2 2.11 OR WARP V3 LICENSE AGREEMENT APPLY TO
THIS SERVICE FIX; HOWEVER, THIS DOES NOT EXTEND ANY WARRANTY
OUTLINED IN SUCH AGREEMENT.
+=====================================================================+
| Installation Notes |
+=====================================================================+
1) You will need the OS/2 Corrective Service Facility boot disks to
install this FixPak. These files should be available from
the same place you got this FixPak from as
CSFBOOT.1DK - Corrective Service Facility bootdisk 1
CSFBOOT.2DK - Corrective Service Facility bootdisk 2
- or -
WKICKR.ZIP - File compressed with PKZIP. Contains both of the
above disk images. Requires PKUNZIP or UNZIP to
extract original files from compressed file.
To create diskettes from the disk image files you need LOADDSKF.EXE.
This is also available from the same place you got this FixPak from
as
LDF.COM - Self extracting file that will create LOADDSKF.EXE.
Place in a separate directory on your harddisk then
enter LDF.
- or -
LOADDF.ZIP - File compressed with PKZIP, contains LOADDSKF.EXE.
Requires PKUNZIP or UNZIP to extract original files
from compressed file.
Use LOADDSKF.EXE to create the diskettes. For each disk image place
a 2MB HD (1.44MB formatted) diskette in A:
a. Enter LOADDSKF CSFBOOT.1DK A: /F
Label as Corrective Service Facility CSFBOOT DISK 1
b. Enter LOADDSKF CSFBOOT.2DK A: /F
Label as Corrective Service Facility CSFBOOT DISK 2
c. Enter LOADDSKF XR_BTK1.DSK A: /F
Label as FixPak XR_BTK1 Corrective Service Diskette 1 (CSF DISK 1)
2) The Current CSD level for the "IBM Developer's Toolkit for OS/2 2.11 or
Warp v3 " will not be changed by installation of this FixPak even though
the SERVICE.LOG file states it will. This FixPak is not a Service Level
change, it upgrades the existing service level (XR_6200) or (XR_3000)
, therefore the SYSLEVEL is not changed. All fix information is recorded
in the SERVICE.LOG.
Look at the file
\OS2\INSTALL\SERVICE.LOG
for information relating to the installation of this (or any) FixPak
on your system. To see the current release level and other related
information use the SYSLEVEL command.
3) If you get a "No Product to service" message while applying this FixPak
then the Current CSD level or Component ID of the "IBM Developer's
Toolkit for OS/2 2.11 or Warp v3.0 " is incorrect. Correct values must be:
Current CSD level: XR06200
Component Id: 562107801
or
Current CSD level: XR03000
Component Id: 562268600
If these values are correct then check for the following files:
CSF_SEL.000
LOGF0000.OS2
LOGSTART.OS2
LOGARCH.OS2
If any of them exist then rename them and try the FixPak install again.
If it works then delete the renamed files.
4) See the README2 file on this same disk for a list of APARs fixed.
+=====================================================================+
| Installation Process |
+=====================================================================+
Note: To view the Corrective Service Facility documentation do:
1. Insert CSFBOOT diskette 1 in drive A
2. OC:\tEnter view a:readme
To INSTALL this fixpak perform the following steps:
1. Insert CSFBOOT disk 1 in A:.
2. Open an OS/2 window or Full Screen.
3. Enter a:\service and press the ENTER key.
4. Follow displayed instructions. When prompted to insert Corrective
Service Diskette 1 (not CSF DISK Diskette 1) place FixPak XR_B098
Corrective Service Diskette 1 in a:. Repeat for disk 2, disk 3 and
disk 4 when requested to do so.
5. If this is the first OS/2 FixPak you have applied to
this system then enter the path where a copy of replaced file(s)
will be stored in the ARCHIVE directory, Ex. D:\ARCHIVE.
If this is not the first OS/2 FixPak then enter the path
where a copy of replaced file(s) will be stored in the BACKUP directory,
EX. D:\BACKUP.
For either case make sure there is a sufficient space available.
6. Click on "OK".
7. You will see an "Application in use" dialog box showing a list of
locked files that cannot be serviced while the system is running.
You are given two choices, to Continue or Reboot. Please select
Continue.
During the install process you will see messages about Archiving,
Updating and Deferring service.
- Archiving saves a copy of the original file in the archive path you
specified.
- Updating means the original files is replaced with the new one from
this FixPak.
- Deferring service means the file to be updated is currently in use
by the system and cannot be updated. The new files from the FixPak
are placed in the \OS2\INSTALL directory on your OS/2 2.11
boot drive in unpacked format for use by the locked file device
driver during reboot after you shutdown.
7. Select NO for redisplay of "Product List" when displayed (after
the first part of the FixPak apply process has completed) if this
is displayed.
8. Click Cancel and Exit to close the Corrective Service Facility window
if necessary.
9. Shut down and reboot your system.
10. You should see the following during reboot.
The locked file driver is loaded.
Processing locked files
Processing complete
At this point the system may do an automatic reboot.
Note: If the message "Program encountered a problem and can not
continue" is displayed, please ignore.
+=====================================================================+
| FixPak Corrective Service Notes |
+=====================================================================+
Product name: "IBM Developer's Toolkit for OS/2"
Standard Edition 3.00.1
New CSD Level: XR_BTK1_ (Country = Generic)
Pre-requisite CSD Level: XR_3000_
System Id: 0
Component Id: 562268600
Archive is ON for this product.
____________________________________________________________
Files contained in FixPak for product:
Filename Name on CSD Disk# Date Time Size
------------ ------------ ----- -------- ----- -------
IPFC.EXE IPFC.EX_ 1 08/08/95 19:54 236644
LINK386.EXE LINK386.EX_ 1 08/09/95 09:17 154174
NMAKE.EXE NMAKE.EX_ 1 08/09/95 16:31 120884
RC.EXE RC.EX_ 1 08/08/95 15:07 102241
************************************************************
Product name: "IBM Developer's Toolkit for OS/2"
Standard Edition 2.10.3
New CSD Level: XR_BTK1_ (Country = Generic)
Pre-requisite CSD Level: XR_6200_
System Id: 0
Component Id: 562107801
Archive is ON for this product.
____________________________________________________________
Files contained in FixPak for product:
Filename Name on CSD Disk# Date Time Size
------------ ------------ ----- -------- ----- -------
RC.EXE RC.EX_ 1 08/11/95 10:14 94431