506 Do you want to remove all entries from the list?
507 IP
508 IPX
509 Naming
510 Default Always
511 You have selected a floppy drive
512 You have selected a fixed disk drive
513 You have selected a CD-ROM drive
514 Data entered is invalid!
515 Data entered is out of range!
516 Required field has no entry!
517 Duplicate entry!
518 Parameter Error
519 (ticks)
520 (bytes)
521 (kbytes)
522 (characters)
523 (milliseconds)
524 (seconds)
525 (retries)
526 Error! Value out of range
527 Parameter: '%s' must be a number in the range %s to %s %s.
528 On
529 Off
530 <default>
531 A
532 B
533 C
534 D
535 E
536 F
537 G
538 H
539 I
540 J
541 K
542 L
543 M
544 N
545 O
546 P
547 Q
548 R
549 S
550 T
551 U
552 V
553 W
554 X
556 Y
557 Z
558 <Floppy>
559 <Fixed>
560 <CD-ROM>
561 Error! Value is not a valid level
562 Parameter: '%s' is not a valid level. Resetting this parameter to the default value.
563 Valid range: %s - %s %s
564 Dynamic Parameter
565 Entry limit exceeded:
566 Yes
567 No
568 All
569 Never
570 Always
571 If NOT Default on target
572 If Default on target
573 &Distribute (Never)
574 &Distribute (Always)
575 &Distribute (If NOT Default on target)
576 &Distribute (If Default on target)
577 &Distribute (Default Always)
578 Ne&ver
579 &Always
580 If &NOT Default on target
581 If D&efault on target
582 &Default
583 Parameter: '%s' was set beyond its maximum length of %d.
584 (minutes)
585 <None>
586 &Replace
587 &Append
588 &Clear
589 &Distribute (Replace)
590 &Distribute (Append)
591 &Distribute (Clear)
592 Replace
593 Append
594 Clear
595 Default Settings
596 Required %s field should have at least one item!
597 Required Login Service field has no entry.
598 &Undo
599 Cu&t
600 &Copy
601 &Paste
602 D&elete
603 Select &All
604 Upgrade to client version %s or higher for this feature.
605 Login Authenticator
606 Trusted Tree
607 Enable DSCAT Contextless Login
608 Wildcard Search Allowed
609 Search Timeout
610 DSCAT Contextless Tree
611 Catalog
612 DSCAT Contextless Login
613 None
614 IP & IPX
615 IPX only
616 IP and IPX
617 IP with IPX Compatibility
618 Client Options
619 &Reset to Default and Distribute (Never)
620 Re&set to Default and Distribute (Default Always)
621 &Default Always
622 &Clear List Always
623 &Clear List and Distribute(Never)
624 &Clear List and Distribute(Clear List Always)
625 IP only
626 Remove IPX if present
627 <Default> %s (Right click to modify)
628 %s (Right click to modify)
629 (hours)
630 (time of day)
631 (percent)
632 Use DHCP Context
633 Use DHCP Tree
634 Use DHCP Server
635 DHCP Settings
637 DHCP Settings
638 You have selected a different Login Service. Do you want to syncronize the remaining services?
639 (days)
640 DHCP Server Binary Data
641 Current
642 Invalid Context Format: The context must be entered using the comma delimited typeful name format (ou=organizational unit, o=organization). For example: ou=sales, o=digitalair
643 DHCP Server from Login Service
644 DHCP Tree from Login Service
645 DHCP Context from Login Service
646 (requests)
3011 NWTSA Notify Object
3012 NDPS Notify Object
3013 NAL Notify Object
3014 Workstation Manager Notify Object
3015 CMD Notify Object
3016 Remote Control Notify Object
3017 NW/IP Notify Object
3018 IP Gateway Notify Object
3019 ISDN Shorthold Notify Object
3020 ZENWorks Imaging Service Notify Object
3104 Couldn't RegisterClass()
3105 Couldn't CreateWindow
3106 GlobalAlloc() failed
3107 You must reboot before trying to reload the Novell IntranetWare Client Services
3108 Reminder
3109 LocalAlloc() failed
3110 You must pass in- Arg[0]:the fullpath of autoexec.nt Arg[1]: the file string to add to the end
3111 The fopen() call to open autoexec.nt failed.
3112 CopyFile() failed
3113 Autoexec.nt not found
3118 The value entered is too small. It has been reset to the smallest allowable value.
3119 The value entered is too large. It has been reset to the largest allowable value.
3120 Parameter Error
3121 A value is required for this parameter. It has been reset to the default value.
3122 The file had a bad file size.
3123 ReadFile failed.
3124 DeleteFile failed.
3125 WriteFile failed.
3126 SetFilePointer failed.
3127 GetTempPath failed.
3128 GetTempFileName failed.
3129 <<&Basic
3130 &Advanced>>
3131 &OK
3132 &Cancel
3133 &Help
3134 RenameFile failed.
3135 Uninstall Novell Client for Windows
3136 Are you sure you want to uninstall the Novell Client for Windows?
3137 You must shut down and restart your computer to complete the uninstall.\n\nDo you want to restart your computer now?
3200 NetWare Support for IP Configuration
3201 NetWare/IP Domain
3202 Advanced Settings
3203 Preferred DSS
3204 Nearest NetWare/IP Server
3205 Enable NSQ Broadcasts
3206 AutoRetries
3207 AutoRetryTime
3210 Minimum value allowed for the retry count exceeded. Value reset to minimum allowed.
3211 Maximum value allowed for the retry count exceeded. Value reset to maximum allowed.
3212 Invalid entry for First Network Drive. Value reset to default.
3213 Parameter Error
3300 Guests
3301 Users
3302 Replicator
3303 Backup Operators
3304 Power Users
3305 Administrators
3306 System
3400 Install Novell GINA Authenticator
3401 This workstation has a version of SFLOGIN installed that is not compatible with this version of the Novell Client.\n\nSelect 'OK' to disable SFLOGIN and continue the Novell Client for Windows install.
3402 The Novell Client for Windows has detected a 3rd-party GINA authenticator installed: %s.\n\nDo you want to replace this GINA with the Novell Client for Windows GINA authenticator (NWGINA.DLL)? (So that NWGINA.DLL will be used instead of the 3rd-party GINA.)\n\nSelect 'No' to leave the current 3rd-party GINA configuration in place without adding NWGINA.DLL.
5000 Novell Client Configuration
5112 Set Primary Provider Error
5200 NetWare/IP Configuration
5201 Novell Client can not be installed together with Client for NetWare Networks
5202 Novell SNMP Agent can not be installed together with Microsoft SNMP agent
5203 Network
5205 IPX Parameter Error
5206 DA Configuration
5210 IPX Advanced Parameter Error
5211 The Bindings list must be empty before switching to Auto Bind.Do you want to clear the list and continue?
5220 SPX Parameter Error
5230 NetBIOS Paramter Error
5231 Named Pipes Parameter Error
5250 Capture Parameter Error
5260 Advanced Settings Parameter Error
5270 NetWare/IP Address Parameter Error
5306 Alert Beep specifies whether an audible beep should be sounded when a pop-up message is displayed.
5307 Auto Reconnect Level determines what is restored after a network critical error.
5308 Caching file writes improves performance by saving files to workstation memory, before saving them to the network.
5309 Checksum provides a higher level of data integrity by validating NCP packets.
5310 Close Behind Ticks is the time in ticks the client waits after a file is closed before flushing the file from cache and writing it to disk. Increasing this value improves performance. There are about 18 ticks per second.
5311 Delay Writes keeps the file in cache for the amount of time specified by Close Behind Ticks after the application closes the file. This is used for applications that repeatedly close and reopen files, such as overlay files.
5312 DOS Name is the operating system name used by the %OS parameter.
5313 Environment Pad specifies the number of bytes to add to the DOS environment for DOS applications.
5314 This controls whether the client will cache files locally or not.
5315 Force First Network Drive specifies the network drive letter the SYS:LOGIN directory is mapped to after logging out. 'On' returns you to the 'First Network Drive.' 'Off' leaves you at the current drive.
5316 Handle Net Errors, when set to 'On', means the client handles network critical errors. 'Off' means the client generates an INT 24 allowing applications to handle network critical errors.
5317 When Large Internet Packets is 'On', it uses the maximum packet size negotiated between the NetWare server and the workstation, even across routers and bridges. If the maximum packet size supported by the network is smaller than the negotiated packet size, the size supported by the network is used.
5318 Large Internet Packet Start Size determines the starting value for negotiating the Large Internet Packet size. Setting this value can shorten the initial negotiation time for packet size over slow links.
5319 Lock Delay determines the delay after a SHARE failure, prior to retrying the open or lock of a file. Increase this value if you receive SHARE errors. There are approximately 18 ticks per second.
5320 Lock Retries determines the number of retries to open or lock a file, after receiving a SHARE failure. Increase this value if you receive SHARE errors.
5321 Log File specifies the location of the LOG file used for client diagnostics (for example, C:\Novell\Client\Log.txt).
5322 Log File Size determines the maximum size of the LOG file used for client diagnostics.
5323 Tells the Novell* Client* for Windows** NT** what type of machine is being used each time the %MACHINE variable is accessed. Use this setting to set the machine's search path to the correct version of DOS.
5324 Max Cache Size determines the largest size of the NetWare cache. Larger values improve network file access performance, but decrease the memory available for running applications or caching local drives.
5325 Max Current Directory Length sets the length of the DOS prompt. Some applications do not function correctly if this value is set greater than 64.
5326 Message Timeout defines the time in ticks before broadcast messages are cleared from the screen without user intervention. There are approximately 18 ticks per second.
5327 Used for bridged WAN/satellite with time-to-net values set too low for workstations to make a connection under either of the following conditions: the server on the other side of the link is not running Packet Burst* or the transfer rate for the link is 2400 baud or less. For 2400 baud, set this parameter to 10000 milliseconds.
5328 Name Service Enum Order sets the order in which names are resolved to addresses during operations such as MAP. Time to access network resources can be decreased by ordering the name services by frequency of use.
5329 NCP Max Timeout is the amount of time allowed to retry a network connection before an error message is displayed.
5330 Net Status Timeout specifies the number of seconds to wait for a response from the network to an application's request before the client displays an error message.
5331 NetWare Protocol allows you to list the order that the NetWare Name Services are accessed during authentication to the network.
5332 Network Printers sets the number of logical LPT ports the NetWare DOS Requester can capture. This parameter allows you to capture and redirect LPT1 through LPT9.
5333 Use this parameter to automatically detect opportunities to cache files. On offers increased performance.
5334 The Burst Mode parameter controls the use of the Packet Burst protocol for file input/output. Generally, Packet Burst reduces overall network traffic and improves performance. If you have a network board that has low performance and your network performance is slow, you might try enabling Packet Burst.
5335 Specifies the maximum read burst size that the client can request from the server. Max Read Burst Size values smaller than the maximum packet size supported by the medium effectively disable Packet Burst* for file reads. The client will try to request a read burst of the maximum size only if network conditions allow it.
5336 Specifies the maximum write burst size that the client can request from the server. Max Write Burst Size values smaller than the maximum packet size supported by the medium effectively disable Packet Burst* for file writes. The client will try to request a write burst of the maximum size only if network conditions allow it. Increasing this value beyond its default might be detrimental to server performance.
5337 Print Header sets the size of the buffer (in bytes) that holds the information used to initialize the printer for each print job. Increase this value if you are using a complex print job, or printing to a PostScript printer.
5338 Print Tail sets the size of the buffer (in bytes) that holds the information used to reset the printer after a print job.
5339 Read Only Compatibility determines whether a file marked Read Only can be opened with a Read/Write access call. Some applications require this parameter to be 'On'.
5340 If Search Directories First is set to 'off', a DIR listing will display files first, then directories. If set to 'on', a DIR listing will display directories first, then files.
5341 Search Mode alters the method for finding a file if it is not in the current directory or path.
5342 If Set Station Time is set to 'On', the workstation's time and date are synchronized with the NetWare server that the workstation attaches to initially.
5343 Specifies which overlay files to use with the specific machine type. This setting is similar to Long Machine Type, except that it is used specifically with overlay files. The value for this setting can be up to four characters long. Use this setting when the %MACHINE variable is accessed. Examples of files using this setting include the ibm$run.ovl file for the windowing utilities and the cmpq$run.ovl file for NetWare* menus.
5344 The NetWare server doesn't have directory entries for '.' and '..' as DOS does. To see '.' and '..' in directory listings, turn Show Dots to 'On'.
5345 Determines the level of enhanced security support. Enhanced security includes the use of a message digest algorithm and a per connection/per request session state. The values are as follows: 0 = disabled, 1 = Enabled but not preferred, 2 = Preferred, 3 = Required. Setting the value of this parameter to 2 or 3 increases security but decreases performance.
5346 Set True Commit to 'On' when processing critical data to guarantee data integrity. 'Off' opts for performance over data integrity. 'On' opts for data integrity over performance.
5347 Use Video BIOS specifies whether the client uses BIOS or Direct Video Memory calls when a pop-up message is displayed. The BIOS method is slower than Direct Video Memory calls.
5348 Hold Files specifies whether files opened by a program using FCB_IO are held open until the program exits. 'On' means they are. 'Off' means they can be closed by the program before it exits.
5349 Specifies the maximum supported packet size in bytes. Use this setting to optimize performance for media (primarily token ring) that can use packets that are larger than the default size. If your network uses bus-mastering, increasing the settings increases system memory usage. Otherwise, system memory usage is usually unaffected by this setting.
5350 Net Status Busy Timeout specifies the number of seconds to wait for a nonbusy response from a server before the client displays an error message.
5352 Cache NetWare Password specifies whether the NetWare password from the first login is stored in memory and used to authenticate to additional NetWare resources.
5353 Tells the client which broadcast messages, if any, to receive. You can choose one of the following settings: All (receive all broadcast messages), Server Only (receives broadcast messages sent by the server only), and None (do not receive any broadcast messages).
5355 Controls whether buffers flushed by an application are committed to disk on the server. Setting this value to On will ensure data integrity at the expense of performance by ensuring file buffers are committed to disk on the server when an application flushes its file buffers.
5401 Auto Reconnect Level
5402 Cache Writes
5403 Checksum
5404 Close Behind Ticks
5405 Delay Writes
5406 DOS Name
5407 Environment Pad
5409 File Caching
5410 Force First Network Drive
5411 Handle Net Errors
5412 Large Internet Packet Start Size
5413 Large Internet Packets
5414 Lock Delay
5415 Lock Retries
5416 Long Machine Type
5417 Link Support Layer Max Buffer Size
5418 Max Cache Size
5419 Max Cur Dir Length
5420 Message Timeout
5421 Minimum Time To Net
5422 Name Service Enum Order
5423 NCP Max Timeout
5424 NetWare Protocol
5425 Net Status Timeout
5426 Net Status Busy Timeout
5427 Network Printers
5428 Opportunistic Locking
5429 Burst Mode
5430 Max Write Burst Size
5431 Max Read Burst Size
5432 Print Header
5433 Print Tail
5434 Read Only Compatibility
5435 Search Dirs First
5436 Search Mode
5437 Set Station Time
5438 Short Machine Type
5439 Show Dots
5440 Signature Level
5441 True Commit
5442 Alert Beep
5443 Use Video BIOS
5444 Log File
5445 Log File Size
5446 NDS BIND
5447 BIND NDS
5448 NDS
5449 BIND
5450 Hold Files
5452 Cache NetWare Password
5453 Receive Broadcast Messages
5454 All
5455 Server Only
5456 None
5458 File Commit
5514 Retries to DSS during startup
5515 Number of seconds between retries
5516 NetWare/IP Domain name
5517 NetWare 1.1 Compatability
5518 Broadcast SAP nearest server queries to network
5519 Preferred server
5520 Preferred tree
5521 Name context
5522 Additional login parameters
5523 First network drive
5524 Product name
5554 IPX Retry Count
5555 Allow IPX access through interupt 7AH
5556 Allow IPX access through interupt 64H
5557 IPX diagnostics enabled
5558 Pre-Allocate VGNMA memory
5559 Source Routing
5560 SPX Connections
5561 SPX Verify Timeout
5562 SPX Listen Timeout
5563 SPX Abort Timeout
5564 Allow Connection Watchdogs
5565 Enable Monitor Community
5566 Monitor Community
5567 Enable Control Community
5568 Control Community
5569 System Name
5570 System Location
5571 System contact
5572 Enable Authentication Traps
5573 specified
5574 off
5575 any
5576 Bindery Connection
5577 Clear Current Connections
5578 Display script results window
5579 Close script results automatically
5580 Run scripts
5581 Profile Script
5582 Login Script
5583 Script Variable %2
5584 Script Variable %3
5585 Script Variable %4
5586 Script Variable %5
5587 Save Settings when exiting Login
5588 Display Connection page
5589 Display Script page
5590 Display Variables page
5591 Login Parameter Error
5592 Only A-Z, 0-9, and _ characters are allowed in the '%s' parameter.
5593 NT Client Parameter Error
5594 Only A-Z, 0-9, -, and _ characters are allowed in server names.
5597 Tree Context Pair Error
5598 Tree and Context pairs must be added to the list, Please enter the additional data.
5600 All
5601 Packet Management
5602 Connection
5603 Environment, NETX Compatibility
5604 File System
5605 Performance, Cache
5606 Printing
5607 TroubleShooting
5608 WAN
5609 Netware/IP
5610 Client
5611 Setup
5612 ACU
5613 Client
5614 Default Login
5615 Advanced Login
5616 Advanced Settings
5617 Workstation Manager
5618 Parameters
5619 Servers
5620 Installation
5621 Protocol Preferences
5622 Service Location
5623 Advanced Menu Settings
5624 Location Profiles
5625 Advanced Menu Settings
5626 Workstation Manager
5627 Execution Options
5628 Policy
5629 Show on Login
5630 Welcome Screen
5700 Entry limit exceeded: limit is 5 entries.
5701 Advanced IPX Parameter Error
5702 The space character is not allowed in Frame Type names. Use an '_' as a valid character to represent a space.
5718 Use NWIP Custom Port
5720 Port Number (Hex)
5721 Auto Detect/Custom Configuration
5722 Log in to Tree/Server
5723 Duplicate Trees are not allowed in this list. Each tree can have only one default context.
5750 Policy Path and Filename
5756 Bitmap Filename
5757 Caption
5800 Workstation Manager Parameter Error
5801 Enable Workstation Manager on this Tree
5802 Enable Volatile User Caching
5803 Days to Cache Volatile Users
5820 Host MIB Parameter Error
5950 Installation Configuration
5951 Display Initial Screen
5952 Accept License Agreement
5953 Ask for Reboot Upon Completion
5954 Major Internal Version
5955 Minor Internal Version
5956 Log in to Tree
5957 Log in to Server
5958 Auto Detect
5959 Custom Configuration
5960 User Home/Mail Directory
5961 NetWare File System Directory
5962 Ask to remove Microsoft NetWare Client
5963 Remove Microsoft NetWare Client
5964 Use Novell GINA
5965 Ask to install NetWare/IP
5966 Install NetWare/IP
5967 Nearest NetWare/IP Servers
5968 Preferred Domain SAP/RIP Servers
5969 Workstation Manager Tree
5970 Preferred bindery server
5971 Tree
5972 Context
5981 Location Profiles
5982 Location Profile Properties
5983 Office
5984 Office Instances
5985 Protocol Preference IP Naming
5986 Protocol Preference IPX Naming
5988 SLP Scopes
5989 SLP Static Scopes
5990 SLP Directory Agents
5991 SLP Static Directory Agents
5992 Use DHCP for SLP
5993 This parameter specifies that Dynamic Host Configuration Protocol (DHCP) be used for obtaining SLP scope and Directory Agent configuration.
5994 SLP Active Discovery
5995 This parameter specifies that SLP is required to look up services from a Directory Agent and not use IP multicasting directly to SLP Service Agents for services. SLP's normal operation is to first check Directory Agents. If no Directory Agent is found, SLP multicasts to Service Agents.
5996 SLP Multicast Radius
5997 This parameter is a number specifying the maximum number of sub-nets (number of routers plus 1) that SLP's multicasting should traverse. The value range is from 1 to 32. A value of 1 confines multicasting to the local segment (no routers).
5999 Specifies that broadcasting should be used in all cases instead of IP multicasting.
6000 SLP Maximum Transmission Unit
6001 This parameter specifies the maximum transmission unit (UDP packet size) for the link layer used. Erroneously setting this parameter either too large or too small will adversely affect performance of SLP.
6002 SLP Cache Replies
6003 When SLP receives a service request from a User Agent, the SLP reply is saved for the amount of time specified by the SLP Cache Replies parameter. If SLP receives a duplicate of this request, the cached reply is sent so the same reply does not have to be generated again.
6004 SLP Default Registration Lifetime
6005 Time (in seconds) for the default registration lifetime of a service.
6006 Give Up on Requests to SAs
6007 This parameter specifies the maximum amount of time SLP will take to send requests to Sevice Agents. A Service Agent is a process that works on the behalf of one or more services to advertise those services.
6008 Wait Before Registering on Passive DA
6009 Specifies the range of time for the random delay interval before a Service Agent registers its service with the Directory Agent.
6010 SLP General
6011 SLP Times
6012 DNS
6013 SLP
6014 Host File
6015 NDS
6016 SAP
6017 NDS
6018 Bindery
6021 Location List
6022 Advanced Button
6023 Auto Reconnect
6024 Enables/disables client auto reconnect.
6025 DOS Long Name Support
6026 Enables/disables DOS application long name support.
6027 Enable Send Message
6028 Specifies whether the Send Message function is enabled. This function is accessed from the Context menu for the selected server in Network Neighborhood.
6029 Use UTF8 encoding and NCPs
6030 When this setting is enabled the client will communicate with UTF8 capable servers using UTF8 encoding and NCPs. UTF8 encoding allows client workstations of differing languages to more effectively communicate with the same server.
6031 Show User Administration Menu
6032 Enables/disables the menu item for user administration. This menu item is displayed in the context menu of the selected server or tree in Network Neighborhood.
6033 Show Edit Login Script Item
6034 Specifies whether the Edit Login Script item is available in the User Administration menu, The Show User Administration Menu parameter must be set to On for this parameter to be useful.
6035 Enabled
6036 Preferred Server
6037 Preferred Tree
6038 Server
6039 User
6040 Status
6041 Server Resolution Time
6042 IPX Encapsulation Port
6043 IPX Compatibility Scope
6044 Query Scopes
6045 IP Gateway
6046 IPX Compatibility
6047 Parameters
6048 Novell IP Gateway
6049 Novell IPX Compatibility Adapter
6050 Agent List Stale Time
6051 Network Number
6052 Migration Agent
6053 Adapters
6056 Number of copies
6057 Form feed
6058 Enable tabs
6059 Number of spaces
6060 Enable banner
6061 1st banner name
6062 2nd banner name
6063 Hold
6064 Notify
6065 Keep
6066 Default Capture
6067 Install NetWare/IP
6068 Install Novell Distributed Print Services
6069 Install IP Gateway
6070 Install Target Service Agent
6071 Additional Components
6072 Variables Button
6073 Begin Login
6074 TSA Preferences
6075 ZENworks Imaging Services
6076 Preferred Server
6077 SPX/IPX
6078 TCP/IP
6079 Protocol
6080 Log Connection Events
6081 Log Registration Events
6082 Log Security Events
6083 Log Service Events
6084 Allow Backup User
6085 Auto Register
6086 Target Service Agent
6087 Quit Idle Connects
6088 Time (in minutes) for DAs and SAs to close idle TCP connections.
6089 Use DHCP
6090 Client Version
6091 Version Information
6092 Support Pack
6093 ACU version
6095 Clear Connections
6096 Gateway Disabled
6097 Gateway Not Connected
6098 Gateway Connection In Progress
6099 Gateway Access Timed Out
6100 Gateway Server Busy
6101 Gateway Access Denied
6102 Gateway Connected
6103 No Gateway Server Found
6104 Gateway Server Rejected Connection
6105 Local Network Down
6106 Gateway Client Aborted Connection
6107 Gateway Server Reset Connection
6108 Novell Workstation Manager
6109 Default Policy Support
6110 Workstation Only
6111 Set Station Time
6112 Synchronizes the client workstation date and time with that of the NetWare* server that the client workstation initially attaches to. Setting the value of this parameter to Off disables the synchronization feature.
6113 Workstation NDS Refresh Rate
6114 Show Novell System Tray Icon
6115 If this parameter is enabled, the Novell icon appears in the System tray at the right-hand side of the task bar. Right-click the Novell icon to select from a list of Novell Client tasks. Double-click the Novell icon to log in to a NetWare* tree or server.
6116 Show Scheduler System Tray Icon
6117 If this parameter is enabled, the Novell Scheduler icon appears in the System tray at the right-hand side of the task bar. Right-click the Scheduler icon to select from a list of Scheduler tasks. Double-click the Scheduler icon to open the Scheduler.
6118 Reboot Upon Completion
6119 Ask NetWare GINA
6120 Install
6121 Optional
6122 Setup
6123 Client
6124 Workstation Manager
6125 NAL Agent
6126 Remote Management
6127 NetWare/IP
6128 Verbose
6129 Force Reboot
6130 Drives
6131 Wait Before Giving Up On DA
6132 This parameter specifies the amount of time that SLP will wait before giving up on a request to a Directory Agent. A Directory Agent collects and caches service advertisements from Service Agents.
6133 Adapter Enabled
6134 Name Resolution
6135 IP Gateway
6136 NDPS
6137 TSA
6138 Replica Timeout
6139 The duration of time in which the client will attempt to login to the previously logged-out NDS replica.
6140 Name Resolution Timeout
6141 The time in seconds the client will wait for the configured name space providers to resolve the specified name to an address.
6142 Preferred Network Protocol
6143 The network protocol preference when creating connections to servers that have both network protocols configured.
6144 Update All if Any
6145 Protocol
6146 Limit SAP Broadcast Queries
6147 Use this setting to limit SAP so that it locates servers only on connections where the bindery is present. Disable this parameter if you want SAP to find servers if the bindery query fails.
6148 Use Default Settings
6149 DHCP NDS
6150 Proxy Enabled
6151 Proxy Server
6152 Proxy Status
6153 HTTP Proxy Disabled
6154 HTTP Proxy Not Connected
6155 HTTP Proxy Connection in Progress
6156 HTTP Proxy Access Timed Out
6157 HTTP Proxy Server Busy
6158 HTTP Proxy Access Denied
6159 HTTP Proxy Connected
6160 No HTTP Proxy Server Found
6161 HTTP Proxy Server Rejected Connection
6162 Local Network Down
6163 HTTP Proxy Server Aborted Connection
6164 HTTP Proxy Server Reset Connection
6165
6166 Change Password
6167 Enables/disables changing your password. The Change Password button is found in the Novell Password Administration dialog. See Enable Password Administration for further information on this dialog.
6168 Enable Salvage Dialog
6169 Enables/disables the salvage dialog. This menu item is displayed in the context menu of the selected volume or directory on a server.
6170 Enable Purge Dialog
6171 Enables/disables the purge files dialog. This menu item is displayed in the context menu of the selected volume or directory on a server.
6172 Enable Map Dialog
6173 Enables/disables the network drive mapping dialog.
6174 Enable NetWare Connections Dialog
6175 Enables/disables the NetWare Connections dialog. This menu item is displayed in the context menu of the Novell (N) system tray icon and in the context menu of Network Neighborhood.
6176 Enable Capture Dialog
6177 Enable Capture Dialog
6178 Enable End Capture Dialog
6179 Enable End Capture Dialog
6180 Enable Who Am I Dialog
6181 Enables/disables the Who Am I dialog. This menu item is displayed in the context menu of the selected server or tree in Network Neighborhood.
6182 Enable Change Context Dialog
6183 Enables/disables the change context dialog. This menu item is found in the context menu of the Selected container in Network Neighborhood.
6184 Enable Logout of Tree
6185 Enables/disables logging out of a tree. The Logout menu item is displayed in the context menu of a tree. Subsequently the Detach button when a tree is highlighted in NetWare Connections is also enabled/disabled according to this parameter.
6186 Enable Authenticate to Tree
6187 Enables/disables authenticating to a tree. The Authenticate menu item is displayed in the context menu of a tree.
6188 Enable NDS Login to Tree
6189 Enables/disables logging in to a tree. The Login to NDS Tree menu item is displayed in the context menu of the selected tree.
6190 Enable NDS Personal Information
6191 Enable NDS Personal Information
6192 Enable NDS Work Information
6193 Enables/disables the Work Information item in the User Administration menu. See the Show User Administration Menu setting for further information on this menu.
6194 Enables/disables the Mailing Information item in the User Administration menu. See the Show User Administration Menu setting for further information on this menu.
6195 Enable NDS Mailing Information
6196 UNC Path Filter
6197 Enables/disables the UNC Path Filter. Filters requests for UNC path resolution sent to the Client for Microsoft Networks (Microsoft Redirector). When enabled, UNC path queries sent to the Microsoft Redirector will first be filtered by the Novell Client to see if the server name is known by the Novell Client. If it is known, then a name resolve will not be attempted by the Microsoft Redirector. If the server name is not known, then the usual name resolution process will occur. This can dramatically increase the speed of network file operations and resource mappings.
6200 Hibernate Reconnect Delay
6201 Allows time for the client to reauthenticate to NetWare servers when the workstation is exiting Hibernate or Stand by modes. Use the Hibernate Reconnect Delay Time and Hibernate Reconnect Retries parameters to configure the amount of time that will be allowed.
6202 Hibernate Reconnect Delay Time
6203 The number of seconds the client will wait before each attempt to reconnect to NetWare servers when the workstation is exiting Hibernate or Stand by modes. This parameter is only effective when the Hibernate Reconnect Delay parameter is on. This parameter is used in conjunction with the Hibernate Reconnect Retries parameter.
6204 Hibernate Reconnect Retries
6205 The number of times the client will attempt to reconnect to NetWare servers when the workstation is exiting Hibernate or Stand by modes. This parameter is only effective when the Hibernate Reconnect Delay parameter is on. This parameter is used in conjunction with the Hibernate Reconnect Delay Time parameter.
6206 Bad Address Cache Timeout
6207 This parameter determines the number of seconds a Bad Address will remain in the Bad Address Cache. If the Client is unable to establish a connection to an IP or IPX address, it stores that address in the Bad Address Cache for the number of seconds specified in this parameter. Setting this parameter to 0 disables the Bad Address Cache.
6213 Cache Refresh Interval
6214 SLP Directory Agent
6215 SLP Directory Agent Settings
6216 Cache Use Limit
6217 Max Transport Unit
6218 Multicast Radius
6219 Cache Refresh Interval Description
6220 Multicast Radius Description
6221 Max Transport Description
6222 Cache Use Limit Description
6223 DA Advertising
6224 DA Advertising Description
6225 Lifetime Minimum
6226 Lifetime Minimum description
6227 Idle Connect
6228 Idle Connect Description
6229 Use Broadcast
6230 Use Broadcast Description
6231 Enable Login Administration
6232 Enables/disables the Login Account Information item in the User Administration menu. See the Show User Administration Menu setting for further information on this menu.
6233 Enable Password Administration
6234 Enable/disables password administration.
6235 Enable Group Membership Dialog
6236 Enables/disables the Group Membership item in the User Administration menu. See the Show User Administration Menu setting for further information on this menu.
6237 Enable Set Current Tree
6238 Enables/disables setting the current tree. This menu item is displayed in the context menu of the selected tree in Network Neighborhood.
6239 Enable NetWare Copy Dialog
6240 Enables/disables the NetWare file copy dialog. This menu item is displayed in the context menu of the selected directory or file.
6241 Enable Logout of Server
6242 Enables/disables logging out of a server. The Logout menu item is displayed in the context menu of a server. Subsequently, the Detach button when a server is highlighted in NetWare Connections is also enabled/disabled according to this parameter.
6243 Enable Authenticate to Server
6244 Enables/disables authenticating to a server. The Authenticate menu item is displayed in the context menu of a server.
6245 Enable Login Dialog
6246 Enables/disables the login dialog. This menu item is displayed in the context menu of the Novell (N) system tray icon and in the context menu of Network Neighborhood.
6247 Enable Disconnect Dialog
6248 Enables/disables the disconnect dialog.
6249 Enable NetWare Utilities
6250 Enables/disables the NetWare Utilities. This menu item is displayed in the context menu of the Novell (N) system tray icon.
6251 Enable Object Properties Dialog
6252 Enables/disables the Object Properties dialog. This menu item is displayed in the NetWare Utilities menu. See the Enable NetWare Utilities setting for further information on this menu.
6253 Enable Systray Config Dialog
6254 Enables/disables the systray config dialog. This menu item is displayed in the context menu of the Novell (N) system tray icon.
6255 Enable Browse To Dialog
6256 Enables/disables the Browse To dialog. This menu item is displayed in the context menu of the Novell (N) system tray icon.
6257 Enable Show Parent Context
6258 Enables/disables showing the parent context. This menu item is displayed in the context menu of the selected container in Network Neighborhood.
6259 Enable Set Default Context
6260 Enables/disables setting the default context. This menu item is displayed in the context menu of the selected container in Network Neighborhood.
6261 Enable Modify Container Script
6262 Enables/disables the modify container script menu item. This item is displayed in the context menu of the selected container.
6266 Enables/disables the Novell Client help. This menu item is displayed in the context menu of the Novell (N) system tray icon.
6267 Enable Novell Client Properties
6268 Enables/disables viewing the Novell Client property pages. This menu item is displayed in the context menu of the Novell (N) system tray icon.
6269 Cancel Desktop Login
6270 Allows/disallows canceling the desktop login.
6271 Force Login Dialog
6272 Always force the login dialog on initial login. Setting this parameter to ON forces the login at initial login rather than attempting a background authentication. This is only used when the Primary Network logon is not set to Novell.
6273 Show NDS Description
6274 Shows/hides the NDS description. Setting this parameter to ON is only utilized when the Network Neighborhood is set to View Details. Setting this parameter to on displays the available NDS description beneath the Comment column of Network Neighborhood.
6275 Show Current Connections
6276 Shows/hides the current connections from displaying in the NetWare Resource Browser and in Network Neighborhood.
6277 Show Bindery Servers
6278 Show/hide bindery servers from displaying in the NetWare Resource Browser and in Network Neighborhood.
6279 Show NDS Objects
6280 Show/hide NDS objects from displaying in the NetWare Resource Browser and in Network Neighborhood.
6281 Force Bindery Connections
6282 Only allow bindery connections.
6283 Display Server Page
6284 Display/hide the Server Page. The Directory Services page is accessed by selecting Properties from the context menu of the selected server in Network Neighborhood.
6285 Display Tree Page
6286 Display/hide the Tree Page. The Directory Services page is accessed by selecting Properties from the context menu of the selected tree in Network Neighborhood.
6287 Display Container Page
6288 Display/hide the Bindery Container page. The Container page is accessed by selecting Properties from the context menu of the selected container icon in Network Neighborhood.
6289 Display Directory Services Page
6290 Display/hide the Directory Services page. The Directory Services page is accessed by selecting Properties from the context menu of the Novell Directory Services icon in Network Neighborhood.
6291 Display Bindery Services Page
6292 Display/hide the Bindery Services page. The Bindery Services page is accessed by selecting Properties from the context menu of the NetWare servers icon in Network Neighborhood.
6293 Display Directory Map Object Page
6294 Display/hide the Directory Map Object page. The Directory Map Object page is accessed by selecting Properties from the context menu of the selected Directory Map Object icon in Network Neighborhood.
6295 Display Volume Statistics Page
6296 Display/hide the Volume Statistics tab. The Volume Statistics tab is found by selecting Properties from the context menu of a volume.
6297 Display Volume Information Page
6298 Display/hide the Volume Information tab. The Volume Information tab is found by selecting Properties from the context menu of a volume.
6299 Display NetWare Rights Page
6300 Display/hide the NetWare Rights tab. The NetWare Rights tab is found by selecting Properties from the context menu of a volume, directory or file on a NetWare server.
6301 Display NetWare Information Page
6302 Display/hide the NetWare Information tab. The NetWare Information tab is found by selecting Properties from the context menu of a volume, directory or file on a NetWare server.
6305 Filter User List
6306 Enables/disables showing only users objects in the Send Message dialog.
6307 Enable Login to Server
6308 Enables/disables logging in to a server. The Login to Server menu item is displayed in the context menu of the selected server.
6309 Remove this component
6310 Suppress single sign-on for this login
6311 Single sign-on
6312 Enable single sign-on
6313 Enable Send Message to Server Dialog
6314 Enable/disable the send message to server dialog. This menu item is displayed within the server context menu item Send Message. See the Enable Send Message Dialog setting for further information on this menu.
6315 Enable Send Message to User Dialog
6316 Enable/disable the send message to user dialog. This menu item is displayed within the server context menu item Send Message. See the Enable Send Message Dialog setting for further information on this menu.
6317 SLP Registration Filter
6318 Registration Filter Scope List
6319 Filtered Service Type List
6320 Use Strict Registration Filtering
6321 Error - SLP Scope Names
6322 LOCAL and REMOTE are reserved names and cannot be added.
6323 Server Cache Timeout
6324 Number of days before an entry is cleared out of the cache.
6325 Enable Trustee Rights Dialog
6326 Enables/disables the trustee rights dialog. This dialog can be reached from a menu item in the context menu of a Volume or Directory or under the NetWare Utilities menu in the red N.
6327 Enable Inherited Rights Dialog
6328 Enables/disables the inherited rights dialog. This dialog can be reached from a menu item in the context menu of a Volume or Directory or under the NetWare Utilities menu in the red N.
6329 Ask for Reboot/Reboot
6330 Ask For Reboot
6331 Reboot
6332 Don't Ask and Don't Reboot
6333 IP Address Costing
6334 This parameter controls the method used to cost address referrals from SLP, DNS, and NDS. The values are: 0 = disable IP address costing, 1 = calculate the address cost via sorting by subnet mask, 2 = calculate the address cost via an ICMP ECHO packet.
6335 Bad Server Name Cache Enabled
6336 Enables/disables Bad Server Name Cache. Bad Server Name Cache is used to keep track of server names the client has tried to resolve but have failed.
6337 Bad Server Name Cache Timeout
6338 This parameter is the number of seconds before the value times out in the cache. Setting the parameter to 4294967295 means that the value will never timeout. The default value is 300 seconds or 5 minutes.
6339 Force Logoff Button
6340 LDAP Contextless Login
6341 Enable LDAP Contextless Login
6342 Enable LDAP Treeless Login
6343 Enable LDAP Context Search Scope
6344 Search Context and Subtree/Context Only
6345 Cluster Connection Validation Interval
6346 The number of seconds between TCP KeepAlive packets. KeepAlive Packets are sent to the Cluster Server to validate the cluster connection. A value of zero will disable KeepAlive packets. The default value is 20 seconds.
6347 Workstation Manager Login Events
6348 Enables/Disables Novell Client login event notifications to be sent to Workstation Manager. These events allow the ZENworks Policy Scheduler to launch policies scheduled for these event types. If you have disabled the Initial Novell Login or users login to eDirectory from the red N menu, enable this setting so that login events are forwarded to Workstation Manager.
6350 LDAP Contextless Login Trees
6351 LDAP Contextless Login Servers
6352 Tree Properties
6353 Server Properties
6354 LDAP Contextless Login Contexts
6356 SSL
6357 Port
6358 Search Timeout
6359 Certificate
6360 SSL Port
6361 Connection Timeout
6364 LDAP Contextless Login Settings
6380 Use NDS Dot Format for Browsing
6381 Build Novell paths using dots to separate NDS context elements. If this is off then backslashes are used to separate NDS context elements.
6382 Display DFS Junction Information Page
6383 Display/hide DFS Junction Information Page. The DFS Junction Information tab is found by selecting Properties from the context menu of a DFS Junction on a NetWare server.
6384 Make Receive Message Dialog TopMost
6385 Forces the Receive Message Dialog Box to be a TopMost Window. This means the Dialog will stay visible even when it does not have focus.
6387 Install NMAS
6388 Install NICI
6389 Install NetIdentity
6391 OEM Extended ASCII Password
6392 Initial Novell Login
6393 NMAS Authentication
6394 Tree Box
6395 Context Box
6396 Tree Browse Button
6397 Context Browse Button
6398 Allow Dots in NetWare Username
6399 Copy NetWare Username to Windows
6400 Enable Update Novell Client
6401 Enables/disables the Update Novell Client. This menu item is displayed in the context menu of the Novell (N) system tray icon.
6410 LDAP Contextless Login Settings
6411 Search Context and Subtree
6412 Search Context Only
6413 Clear-Text
6414 Allow Wildcards in Searches
6415 Set this value to On to allow wildcard searches for any of the search attributes in LDAP Services during login.
6416 Search on Username
6417 Set this value to On to allow LDAP Services to search for users based on username during login.
6418 Search on E-mail Address
6419 Set this value to On to allow LDAP Services to search for users based on email address during login.
6420 Search on Unique ID
6421 Set this value to On to allow LDAP Services to search for users based on unique ID during login.
6422 Search on Surname
6423 Set this value to On to allow LDAP Services to search for users based on surname during login.
6424 Search on Given Name
6425 Set this value to On to allow LDAP Services to search for users based on given name during login.
6426 Search on Full Name
6427 Set this value to On to allow LDAP Services to search for users based on full name during login.
6428 Search on Telephone Number
6429 Set this value to On to allow LDAP Services to search for users based on their first telephone number during login.
6430 Display Context
6431 Set this value to On to allow LDAP Services to display the user context during login.
6432 Display Full Name
6433 Set this value to On to allow LDAP Services to display the user's full name during login.
6434 Display E-mail Address
6435 Set this value to On to allow LDAP Services to display the user's email address during login.
6436 Display Unique ID
6437 Set this value to On to allow LDAP Services to display the user's unique ID during login.
6438 Display Surname
6439 Set this value to On to allow LDAP Services to display the user's surname during login.
6440 Display Given Name
6441 Set this value to On to allow LDAP Services to display the user's given name during login.
6442 Display Telephone Number
6443 Set this value to On to allow LDAP Services to display the user's first telephone number during login.
6444 User Search Failure
6445 Defines the action taken by LDAP Treeless Login when it is unable to find the user in the first available tree. You can choose one of the following settings: Stop (end the search), Prompt (prompt the user to end the search or continue the search), and Continue (continue the search trying all subsequent LDAP servers in the server list).
6446 Stop
6447 Prompt
6448 Continue
6501 Specifies whether the Advanced button on the Login dialog is enabled. This button leads to various tabs that help you to specify advanced login parameters.
6502 If this setting is on, any periods entered in the NetWare username will be treated as part of the name, rather than as context delimiters. The user will not be able to enter the context as part of the username, but will have to enter it separately. This makes it possible for the user to login with a username such as 'John.Smith' to both NetWare and Windows.
6503 Specifies the bitmap that appears on the Windows NT/2000/XP welcome screen. You can specify any bitmap located in the Windows NT/2000/XP directory. You can also leave the field blank if you don t want to use a bitmap.
6504 Use this option to specify the text that appears in the Windows NT/2000/XP welcome screen title.
6505 Specifies whether the Clear Connections checkbox appears on the Login dialog. The checkbox allows you to clear all previous connections when you create a new connection to the network.
6506 Specifies whether the Context is displayed on the Login dialog.
6507 Specifies whether the Context Browse button is displayed on the Login dialog.
6508 If this setting is on, whatever is entered in the primary (NetWare) Username field is copied into the Windows Username field, regardless of what might already be there. This setting has no effect when logging in Workstation Only, nor does it have any effect when doing a secondary login (from the Red N). Note that if the Windows Username is blank, this happens without this setting, but once the value has been set by a successful login, it will persist with that value, unless the location profile mandates that the name be blank. This setting makes it possible for an administrator to set up duplicate usernames in both NDS and Windows and the user can then log into both with a single entry. This setting provides support for UPN syntax and using dots in NDS usernames.
6509 After the user logs in to the network with NetWare Login, the authentication server's \sys\public\winnt directory is searched for ntconfig.pol file. If the file is found, the policy is applied to the user and workstation.
6510 Specifies whether the Force Logoff button is displayed on the Login dialog when the workstation is locked. Force Logoff allows you to terminate the previously logged in user s Novell Client session even if he locked the workstation. Warning: Any unsaved work that the previous user had open will be lost. To maintain open applications and current network connections, log in using the previously logged in username and password.
6511 If this setting is off, the initial Novell Login window is disabled when the workstation is started.
6512 Specifies whether the Location list on the Login dialog is enabled. The list shows recent places where the user has logged in.
6513 If this setting is on, Novell Modular Authentication Services (NMAS) is enabled during login. NMAS authentication adds additional security to the network. However, if your network does not use NMAS, login may take additional time and you might want to disable NMAS authentication by changing this setting to off.
6514 If this setting is on, the use of the OEM extended ASCII characters in passwords is enabled. You should only use OEM extended ASCII characters if you have legacy software that requires you to use the OEM Code Page. The latest versions of Novell Client support extended ASCII characters using the UNICODE code page and do not need this setting to be enabled in order to handle special characters such as s ╤, or ¼ .
6515 To specify your policy path and filename, enter the path to your policy file in this setting. The path must be a valid UNC path. UNC-style pathnames do not use the usual MS-DOS pathname convention (drive:\directory). Instead, use the following format: \server\volume\dir1\dir2\filename.ext
6516 Specifies whether the Suppress single sign-on for this login checkbox appears on the Login dialog. This checkbox only appears on the Login dialog if the Novell single sign-on product is installed on the workstation. The checkbox allows you to disable the single sign-on process for the current login attempt.
6517 Specifies whether the Tree is displayed on the Login dialog.
6518 Specifies whether the Tree Browse button is displayed on the Login dialog.
6519 Specifies whether the Variables button on the Login dialog is enabled. The button allows you to enter login script variables to be used when the user logs in.
6520 Specifies whether the Workstation Only checkbox appears on the Login dialog. The Workstation Only checkbox is used to log in to the Windows workstation without logging in to the NetWare network.
6521 SLP Protocol Version
6522 Determines the SLP protocol version that will be used by the client. Selecting Automatic will result in the client using the SLP protocol version determined by the DA contacted and its scope. Selecting SLPv2 only or SLPv1 only will limit the client to that specific SLP protocol version for both unicast and multicast. In a network with no DAs, both SLPv1 and SLPv2 requests are multicasted.
6523 SLPv2 only
6524 SLPv1 only
6525 Automatic
6526 Use Multicast if no Unscoped DA Found
6527 If no DA is found that supports unscoped, use multicast for unscoped and unicast to active DAs for other scopes. This parameter is used only when the SLP Protocol Version is SLPv1.
6528 SLP Service Request Limit
6529 Limits the total number of attribute requests sent when using a wild card search. An attribute request is sent for each service and ICMPs are sent to cost each referral. If the SLP Resolve Nearest Server parameter is off, there is unnecessary traffic. If the SLP Resolve Nearest Server parameter is on, this parameter is not used. Setting this parameter to 0 allows for unlimited SLP Service Requests.
6530 SLP Resolve Nearest Server
6531 This parameter enables costing and sorting of all attribute responses in order to return the nearest server.
6532 SLP Resolve Nearest Server Wait Time
6533 The number of milliseconds to wait after the last SLP response for additional SLP responses before resolving the nearest server. If the SLP Resolve Nearest Server parameter is off, this parameter is not used.
6540 Remember Workstation Only setting
6541 Determines whether or not the Workstation Only checkbox will remember the previous setting that was used. Setting this parameter to On causes the Workstation Only checkbox to remember the previous setting. Setting it to Off causes the Workstation Only checkbox to use the Workstation Only Default parameter value.
6542 Workstation Only login after network login
6543 Determines whether or not a Workstation Only login is attempted if the login to the network fails. Setting this parameter to On causes a Workstation Only login to be attempted if the network login fails. Setting it to Off skips the Workstation Only login after a network login failure.
6544 Workstation Only Default
6545 This is the default value for the Workstation Only checkbox. This paramter only applies when the Remember Workstation Only Setting parameter and the Workstation Only if not connected parameter are both set to Off.
6546 Server Connection Retries
6547 This parameter controls the number of times that Login will try to establish a connection to a server. If Login tries to connect to a server and fails, it will wait 1 second and then try to connect again. It will continue to do this until the number of retries has been reached.
6548 Display Password Policies
6549 Enables/disables the display of the Password Policy during the Change Password function. The Password Policy determines whether a new password shall be acceptable - based on the minimum/maximum password length, the number of alpha or numeric characters, and so on.
6550 Workstation Only if not connected
6551 This parameter causes Login to check the network connection status and set the Workstation Only checkbox accordingly. If this parameter is set to On and Login cannot determine that a valid network connection exists, it checks the Workstation Only checkbox. If this parameter is set to Off, Login does not attempt to determine the network connection status.