home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR21
/
EZCP320A.ZIP
/
EXAMPLE.EZL
< prev
next >
Wrap
Text File
|
1993-02-18
|
7KB
|
129 lines
; This file is an example EZ-DiskCopy PRO/EZ-Labeler Label File (.ezl).
; All options and parameters are described here. See the manual
; for further details.
; To look at the output this file generates, type 'ezl example.ezl prn'.
; This assumes your printer is on and connected to the printer port.
; Alternatively, labels can be printed during diskette duplication with
; EZ-DiskCopy PRO.
; An EZ-Labeler Label File consists of any combination of:
; label lines
; comments
; command keywords
; in-label keywords
; printer control code sequences (See your printer manual for details.)
; Any text after a ';' is ignored (use for comments).
; Blank lines are ignored.
; Any other line that DOESN'T start with a @ ; . < will be an error.
; Maximum line length is 1024.
; Label file for EZ-DiskCopy PRO Full System Disk.
;***************************************************************************
; These are command keywords. A command keyword must start with
; an '@' in the first column of a line. One keyword per line only.
; The letters in keywords can be upper and/or lower case.
; Multiple keywords on a line are ignored.
; The equal sign ('=') assigns a value to a keyword. Spaces after an
; equal sign are significant.
; NOTE: snfile, snlist and pause are not supported by EZ-DiskCopy PRO.
@copies=1 ;number of identical copies (makes 1 set).
; Default 1, maximum 32767.
@s/n=CP31000000 ;serial number of first label set. Default is 0.
; EZ-DiskCopy PRO S/N option will override this
; keyword.
;Using 'EZL.EXE filename.ezl' from the command line
;will start the label serialization with the number
;indicated for @s/n=. Within EZCP.EXE, and if no
;serial list file exists (*.ser), Utility/Find Serial
;will search for the beginning serial number on the
;master disk which is generally the same number as
;indicated in the 'filename.ezl' file as @s/n=?????
;and will make the first copy with a number one greater
;than that found on the original master disk.
@snfile=a:serial.ezx ; Has no effect when running EZ-DiskCopy PRO and using
; this label definition file. When specified, a file
; containing the current serial number will be written
; to disk drive and file name specified. The serial
; number will be placed into this file. If the file
; already exists, it will be overwritten. Meant for
; serializing diskettes. With EZL.EXE, this is the
; filename and extension that will be created on
; floppy disk as labels are printed for each disk.
; The @snfile= is not used during execution of
; EZ-DiskCopy PRO. The last serial number within the
; indicated by @snlist= will be incremented by 1 and
; written to the specified @snfile= file as well as
; appended to @snlist=.
@snlist=c:serial.ser ;when specified, the serial number will be apppended
; into this file. If the file doesn't already exist,
; it will be created, otherwise the serial number
; is appended. Meant for keeping a list of serial
; numbers that were printed. When this file exists,
; the last serial number, plus 1 is used as the
; starting point for the next serial number. To
; eliminate confusion, always use the .SER extension.
@pause=on ;causes a pause before printing a label set.
@output=lpt1 ;specify port, file, screen. Default is 'prn'.
; '@output=con:' specifies to screen
; '@output=filename.ext' specifes to file filename.ext
@labels=1 ;number of label sets to print, default is 1, max 32767.
; @labels is IGNORED when label printed with EZ-DiskCopy
; since 1 label set is printed for each disk copied.
@dtformat=mm-dd-ccyy ;format for date field. No spaces allowed within format.
;Defaults to mm/dd/ccyy. Max length is 32.
; dd is date, mm is month, yy is year, cc is century
@date=07-01-1993 ;uses today's date when not specified.
; OVERRIDES dtformat keyword. Max length is 32.
@time=12:00:00 ;uses current time when not specified. Max length is 8.
;***************************************************************************
;***************************************************************************
; These are in-label keywords. All start with a '~' and are only valid
; on a label line (see further below).
; CAUTION: ANY characters directly after an in-label keyword are ignored
; (up to the replacement length). DON'T place additional keywords
; or printer control codes directly after in-label keywords.
;
; ~D is replaced with date - format selected by 'dtformat' keyword.
; ~T is replaced with time.
; ~S is replaced with serial number - selected by 's/n' keyword,
; or from the EZ-DiskCopy PRO serial number. If this keyword
; appears at the end of a line, pad the area with any character
; so the total space is at least as long as the serial number.
;***************************************************************************
;***************************************************************************
; Any line that starts with a '<' is a printer control code line.
; Control code numbers must be listed in decimal and seperated by spaces.
; Control codes can also be interspersed within a form by surrounding
; the list of codes with '<' and '>'. Codes do not take any space on the
; printed label, unless the code causes a blank space.
; The file 'EPSON.EZL' lists some useful EPSON control code sequences.
<27 69> ;This code sequence tells an Epson compatible printer to print bold.
;***************************************************************************
;***************************************************************************
; Here is a typical label, 6 lines high by 34 columns wide.
; Every label line must start with a period.
; If printer control codes are interspersed within a label, alignment
; of label areas should be thoroughly tested.
. <27 45 1>EZ-DiskCopy PRO (tm) V3.xx<27 45 0> ; Underline on/off
. Serial # ~SSSSSSSSS ;
.Release: ~DDDDDDDDD Time: ~TTTTTTT;
.(C)opyright 1988-93 EZX Publishing;
. FULL SYSTEM DISK ;
. ;
;***************************************************************************
<27 70> ;This code sequence tells an Epson compatible printer to turn off bold.