home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR16
/
PRNF245.ZIP
/
LQ-800HC.DAT
< prev
next >
Wrap
Text File
|
1992-06-24
|
2KB
|
57 lines
Epson LQ-800$CHars with hex ; First line gives the file's title & data format
; This file is functionally exactly the same as LQ-800.DAT
; except that (a) characters may be entered directly (num-
; bers must be preceded with \) and (b) it uses Hex numbers.
; H after the $ in the title specifies hex numbers and C
; specifies direct Character format. Other letters after
; the $ have no effect.)
Misc ; 1st category (no = sign)
Init Prn= \00\00\00
Reset Prn= \1B@\0D ; Epsons can be reset with Esc @
Manual Style= \1Bg\1B0 \1BP\1B2 ; Tricky combo: 15 cpi, 8 lines/inch
; ^ ^ note these are numerals, not numbers
; The next two are superscript, condensed, and closely spaced vertically
Very Small= \1BS\00\1BP\0F\1B3\11 \1B2\12\1BT ; pica 1/17"H 17/180"V
Tiny= \1BS\00\1BM\0F\1B3\10 \1B2\12\1BP\1BT ; elite 1/20"H 16/180"V
Grafix Chars= \1Bt\01 \1Bt\00 ; Only w suitable identity module.
Upper Ctrls= \1B6 \1B7
FF= \0C
LF= \0A
CR= \0D
NewLine= \0D\0A
Ctrl-Z= \1A
Push 4= \0A\0A\0A\0A ; pushes paper up. useful when debugging fonts &c
Keyboard=\00\00\00\00 ; Asks for input for ON string at the keyboard
Font Widths
Wide= \1BW\01 \1BW\00
Pica= \1BP
Elite= \1BM
15 cps= \1Bg
Condensed= \0F \12
Proportional= \1Bp\01 \1Bp\00 ; overrides font widths
Style ; 1st 3 mix with any font but proportional
NLQ= \1Bx\01 \1Bx\00
Sans Serif= \1Bk\01 \1Bk\00 ; Only in NLQ w Sans Serif cartridge
; oddly, any non-0 does as well as any other
Underlined= \1B-\01 \1B-\00 ; these do mix w prop:
Emphasized= \1BE \1BF
Dbl Strike= \1BG \1BH
Italics= \1B4 \1B5
SperScript= \1BS\00 \1BT
SbScript= \1BS\01 \1BT
Justify= \1Ba\03 \1Ba\00
Center= \1Ba\02 \1Ba\00
DownLd Chars= \1B%\01 \1B%\00 ; char set loaded must match draft/nlq/prop
CF Copy Font= \1B:\00#\00 ; 0 loads Roman. 1 loads Sans Serif et al
Format
RMargin= \1BQ# \1BQP ; takes num of chars for right margin
LMargin= \1Bl# ; takes num of chars for left margin
Tab=\1Be\00# \1Be\00\08 ; Off sets to 8 char (default)
8 Line/inch= \1B0
6 Line/inch= \1B2
180th"/Line= \1B3# \1B2 ; takes num of 180ths in/line Off = 6 ln/in
SkipOver=\1BN# \1BO