home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR16
/
BOOKLT44.ZIP
/
README.1ST
< prev
next >
Wrap
Text File
|
1993-07-03
|
6KB
|
103 lines
BOOKLET is designed to create PC Booklet sized documents from
full page text files on Laser Printers which emulate the Hewlett-
Packard LaserJet series. It prints four pages of the text file on one
sheet of paper. The pages are printed "two thirds size" on the right
and left halves of both sides of a sheet of paper turned sideways
(Landscape orientation.) It supports all the standard sizes of paper
(A4, LETTER, LEGAL, and EXECUTIVE)
BOOKLET will perform transformation on basic LaserJet formatting
commands. This means that you can use your word processor to print a
formatted document to a file and use BOOKLET to print that file in
booklet form. For this to be successful, you must have fonts loaded
in your printer for the sizes BOOKLET will use. These can be from a
font cartridge or may be soft fonts which you have loaded ahead of
running BOOKLET. BOOKLET does not create or load any fonts. You will
need fonts which are approximately two thirds the point size of the
fonts you use in your document.
The BOOKLET Document has been formatted for LaserJet printers so
it is not easy to read on a computer screen. You may need to supply
one or more parameters to BOOKLET. The size of paper you are using is
required if it is not LETTER. This will be either /S:A4 for the
European standard paper or /S:LETTER for US 8.5x11 inch paper.
A second parameter is needed if you are using the Multi-Purpose
tray on an HP LaserJet IIP or LaserJet IIIP and your output is going
to the normal stacker tray. This parameter, /K:MP causes the order of
printing to accommodate the way these printers take paper from the MP
tray. Your command line would look as follows:
BOOKLET /S:LETTER /K:MP
If you are using the front output tray, use the /K:DJ parameter in
place of the /K:MP parameter.
For the HP DeskJet series you will need to add two parameters.
Add /K:DJ /AS:9,1.5 to cause the printing order to match the way the
DeskJets feed paper and to tell BOOKLET about the extra unprintable
margin these printers have. Your command line would look as follows:
BOOKLET /S:LETTER /K:DJ /AS:9,1.5
If you have a printer other than the above which stacks its
output with the printing up you will need /K:INVERTED as a second
parameter. Your command line would look as follows:
BOOKLET /S:LETTER /K:INVERTED
When you are prompted to load the pages for the second side,
place the pages face down (as they came out of the printer) in the
source paper tray. (Unless you are using the Multi-purpose tray. In
that case, the pages should be face up.)
BOOKLET is distributed as shareware.
Shareware is commercial software distributed in an unconventional
manner. Shareware isn't free. If you use it regularly, the authors
expect compensation. Shareware allows you to evaluate the product
before you purchase it. If you use this product, you are obliged to
register it.
Copies of BOOKLET may be freely distributed in its
self-extracting form (BOOKLT.EXE.) No fee, charge or other
compensation may be accepted for the distribution of BOOKLET. Except,
Public Domain Disk Vendors and BBS(s) may charge a nominal fee for
distribution of the program. Such charges must clearly be labelled
distribution charges and the recipient of BOOKLET must be informed
that the distribution fee does not relieve the payment of the
registration fee for BOOKLET.
The BOOKLET files consist of:
BOOKLET.EXE The BOOKLET program
BOOKLET.PCL The BOOKLET document
REGISTER.FRM The BOOKLET registration form
README.1ST The file you are now reading
FILE_ID.DIZ A Bulletin Board Description of BOOKLET
You may register your copy of BOOKLET directly with Sympathetic
Software by sending a completed copy of the enclosed order form. You
may also order from the Public (software) Library with your MC, Visa,
AmEX, or Discover card by calling 800-2424-PsL or 713-524-6394 or by
FAX to 713-524-6398 or by CompuServ to 71355,470 or by mail to PsL,
P.O. Box 35075, Houston, Texas 77235-5705. These numbers are for
ordering only. Form information about dealer pricing, volume
discounts, site licensing, shipping of product, returns, latest
version numbers of other technical information contact Sympathetic
Software on CompuServ to 71046,1476 or write to Sympathetic Software,
9531 Telhan Drive, Huntington Beach, CA 92646.
This program is produced by a member of the Association of
Shareware Professionals (ASP). ASP wants to make sure that the
shareware principle works for you. If you are unable to resolve a
shareware-related problem with an ASP member by contacting the member
directly, ASP may be able to help. The ASP Ombudsman can help you
resolve a dispute or problem with an ASP member, but does not provide
technical support for members' products. Please write to the ASP
Ombudsman at 545 Grover Road, Muskegon, MI 49442-9427 or send a
Compuserve message via CompuServe Mail to ASP Ombudsman 70007,3536.
The Ombudsman may be contacted by FAX by sending to the ASP FAX
number: (616) 788-2765. In communications with the Ombudsman please
include a telephone number and/or FAX if available.