home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR15
/
FRT176.ZIP
/
FRTPLUS.EXE
/
READ.ME
< prev
next >
Wrap
Text File
|
1993-10-13
|
3KB
|
100 lines
Freight+ 1.72 UPS Rate Look-up
by Carrera Computers
Freight+ UPS Rate table look-up is a memory resident 5k ram
UPS rate look-up program. Which will calculate all UPS
rates, Insurance, COD, Saturday Delivery, Oversized charges etc..
Freight+ UPS Rate Look-up is a small portion of the actual
Freight+ Computer Manifesting systems which replace the UPS or RPS
Hand Writted Log books. Complete UPS/RPS manifests with Scale
nterfaces and Bar Code readers are available from Carrera
Computers. See product listing below!
To to obtain new UPS rates send $45.00 + 5.00 Shipping.
We will install your Ground Zone Chart and return a registered
copy with current UPS rates to you promptly.
Carrera Computers,
32808 Alderbrook Rd.
Lake Elsinore, CA 92530
Ph: 909 678-4522 Fax: 909 678-3483
Master Card, Visa, COD's.
DEMO: To see a slide show demo of Freight+ UPS Manifesting System
type: "FRT" from the FRTPLUS directory after installing your
Freight+ Rate Look-up System.
INSTALLATION OF FREIGHT+ RATE LOOK-UP:
Freight+ products must be installed in a directory called
"FRTPLUS" to work properly.
Note: Freight+ Rate Look-up supports several RS-232 electronic scales.
Call Carrera Computers for more information on scale interfaces.
1. To install Freight+ Rate Look-up product: type INSTALL C:
2. Type: RATES to load the 5k TSR 'Freight+ Rates' into memory.
3. To activate the TSR press 'Shift+F1' keys at the same time
from anywhere in you computer system.
4. To undoad the TSR type RATES/U from the FRTPLUS directory
You may set a FRT environment variable which will direct
Freight+ Rate lookup as to the Hard Disk and Directory where
the Freight+ files are located. ONLY necessary if you will
be using Freight+ Rate Lookup on more than one hard disk.
From the dos prompt or your autoexec.bat file type:
SET FRT=C:\FRTPLUS\
Freight+ Rate Look-up will place the calculated shipping charges
into the DOS Keyboard Buffer upon completion of your calculations.
To turn off the keyboard stuffer type the following from the DOS
prompt or place in your autoexec.bat file.
SET KEYPOST=NO
For advanced users of dos. Freight+ Rate lookup can be
loaded high using the LOADHIGH MS-DOS 5.0 command. See the
MS DOS manual for more details.
Call for information about complete UPS/RPS manifesting systems.
FREIGHT+ PRODUCTS INCLUDE:
1. FREIGHT+ Rate Look-up - A UPS rate calculator $45.00
2. FREIGHT+ - Stand alone UPS/RPS/FED-X/USPO/User definable rates $495.00
3. FREIGHT+ JUNIOR - Memory resident UPS manifesting in 5k of Ram $695.00
4. FREIGHT+ BOOK MASTER - UPS manifesting and allows for multiple $ CALL
UPS manifesting books to be created at the same time. Also available
in TSR version.
All systems are available in single or multi user format.
Prices are subject to change without notice.
Operating system requirements: The TSR products require MS-DOS,PC-DOS,
DR-DOS and require 5k of ram. Non memory resident versions will
run in DOS,Unix/Xenix,(Mac soon) or any other platforms that the support
Foxbase compilers.
All DOS Freight+ products support electronic scales and bar code readers.
Please call Carrera Computers if you have any questions. (909) 678-4522