home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
IBM Thinkpad Drivers FTP
/
755CDSAS.TXT
< prev
next >
Wrap
Text File
|
1997-01-01
|
5KB
|
121 lines
This readme document is ONLY for the IBM Thinkpad
SELECT-A-SYSTEM dos/windows and OS2 warp preload. If the
user has installed Warp from a shrink wrapped copy then
the following process will not work.
IF YOU DO NOT HAVE THE INSTALL DISKS, YOU CAN USE THE WARP UTILITY DISKS
THAT ARE AVAILABLE ON THE IBM BBS.
Backing up an Restoring The Desktop
This procedure requires 2 seperate diskettes. A blank one to create your own
backup, and the diskette you downloaded from the IBM BBS.
It is always a good idea to make frequent backups of your desktop. The
folowing procedure explains how to make a backup and use it to restore
desktop if something happens to it. There is a related procedure called
archiving which may also be used to recover a customized desktop, but
it is still a good idea to have a backup on diskette.
You will need your OS/2 Utility disks created from the System Setup
folder, as well as a blank diskette,
and you will also need to know the actual name
of the directory, where OS/2 keeps its Desktop information. It is
generally named DESKTOP, but you may need to verify this before
beginning the procedure
o Open an OS/2 Window either by clicking on the OS/2 window object
on the Launchpad, or by double-clicking Command Prompts,
then double-clicking the OS/2 Window object.
o At the C:\ prompt, type the following, then press ENTER:
DIR /AD /P
o This will show you a list of directories and files. Look for a
directory named DESKTOP or something like that, i.e, DESKTOP1,
DESKTOP2, or OS!2_DESK, etc. Write down the name of this
directory. (If it is different than DESKTOP, you will need to
substitute that name for DESKTOP in the examples below)
Backing up
1. Restart your system with the OS/2 Utility disk 1 in the A: drive.
2. When asked, insert Utility disk 2, and press enter
3. The Utility disks will exit the boot process and give an A: propmt
4. Insert Utility disk 3
5. Backup your DESKTOP directory and subdirectories to the blank diskette
by typing the following command at the c:\ or a:\ prompt
backup c:\desktop a: /s
where C: is the drive where OS/2 resides and A: is where your disk is.
6. The system will read the Utility disk and prompt you to insert the backup
diskette into the A: drive
7. Next, copy the OS2.INI and OS2SYS.INI files from the OS2 directory
to your diskette, by typing the following command, then pressing enter.
COPY C:\OS2\OS2*.INI A:
8. Next, copy your current config.sys to the diskette , by typing the
folowing command and then pressing ENTER.
COPY C:\CONFIG.SYS A:\
9. Label this disk appropiately and put it away in a safe place.
Restoring your Desktop
For this procedure, you will once again need your Utility disks,
plus your disk with backup of your desktop. The diskette used will
be the diskette you downloaded from the IBM BBS.
1. Restart your computer with your OS/2 utility disk 1in the A: drive
2. When prompted, insert utility 2 and press ENTER.
3. When the boot process stops at an A: prompt,
4. Insert the diskette used to create your desktop backup.
6. Copy the OS2.INI and OS2SYS.INI from the diskette to the \OS2
subdirectory on your hard drive, by typing the following command
at the C:\ prompt, then pressing enter.
COPY A:\OS2*.INI C:\OS2
7. Copy the config.sys from your backup diskette to the C: drive, by
typing the following command and pressing enter.
COPY A:\CONFIG.SYS C:\
8. Restore the desktop directory and subdirectories from your backup
diskette to the computer.
9. Insert the utility disk 3 and type the following command at the A: prompt
RESTORE A: C: /S
10.The system will prompt the user to insert the backp diskette.
11.You should now be able to remove your diskette and restart your computer.
THE WARP UTILITIY DISKETTES ARE AVAILABLE ON THE IBM PC COMPANY BBS
IN THE PC300 AND PC700 SECTION. THE NAMES FOR THE FILES ARE
WARPUT01.DSK, WARPUT02.DSK AND WARPUT03.DSK. YOU WILL ALSO NEED
LDF.COM FROM THE BBS TO UNCOMPRESS THE FILES.
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
NOTE:
** NO WARRANTY ** ANY USE BY YOU OF THE SOFTWARE IS AT YOUR OWN RISK.
THE SOFTWARE IS PROVIDED FOR USE "AS IS" WITHOUT WARRANTY OF ANY KIND.
TO THE MAXIMUM EXTENT PERMITTED BY LAW, IBM AND ITS SUPPLIERS DISCLAIM
ALL WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IBM IS NOT OBLIGATED TO PROVIDE ANY UPDATES TO THE
SOFTWARE.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. In no event shall IBM or its
suppliers be liable for any damages whatsoever (including, without limitation,
incidental, direct, indirect special and consequential damages, damages for
loss of business profits, business interruption, loss of business information,
or other pecuniary loss) arising out of the use or inability to use this
product, even if IBM has been advised of the possibility of such damages.
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*