home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.muug.mb.ca
/
2014.06.ftp.muug.mb.ca.tar
/
ftp.muug.mb.ca
/
pub
/
src
/
traceroute_pkg.tar.gz
/
traceroute_pkg.tar
/
traceroute
/
bin
/
README
< prev
next >
Wrap
Text File
|
1989-11-24
|
2KB
|
33 lines
This file contains a summary of all the files in the bin directory.
-- Manavendra Thakur <thakur@zerkalo.harvard.edu> 11/24/89
README This directory contains pre-compiled versions of all
the binaries that would be created by running the
Makefile, for both Sun 3 and Sun 4 machines. (The
Sun 3 binaries will also work on a Sun 3x machine.)
raw_ip.o.sun3os4 These files are kernel modules that have been
ip_icmp.o.sun3os4 compiled from source code sent out by Bill Nowicki
raw_ip.o.sun4os4 of Sun Microsystems <nowicki@sun.com>. The raw_ip.o
ip_icmp.o.sun4os4 and ip_icmp.o modules are needed to enable Van
Jacobson's traceroute program, which traces the exact
network path from your node to any remote host. These
modules have been tested under SunOS 4.0.3 and 4.0.3c,
and they do work. To install, you should replace the
appropriate modules in /sys/arch/OBJ (where "arch" is
the output of the "arch -k" command when run on your
system -- either sun3, sun3x, sun4, or sun4c). Then
recompile and reinstall your kernel. You will also
need to install the traceroute program (listed
immediately below).
traceroute.sun3os4 Binaries of Van Jacobson's traceroute program.
traceroute.sun4os4 These binaries include Matt Mathis' patches for Loose
Source Record Route support. (This allows you to
see how site A would send packets to site B. Neither
site A nor site B has to be yourself.) Install the
appropriate binary for your architecture in
/usr/etc/traceroute (or wherever you prefer) and
make it setuid to root.