V≡BQLINECEXP
                                                                                  TimeSaver is a graphical event schedule manager.  The system date must be set in order for the program to operate properly.  Upon entry the user is presented     with a calendar page of the current month with the current day highlighted.  A   flashing arrow pointer will appear in the upper left corner of the current day   box.  The keypad keys move this pointer around the page.  Each day is subdivided into 18 timeslots, 10 across the top of the box and 8 across the bottom.  The    keypad '+' and '-' keys select these slots which range from 7:00 AM to 12:00     Midnight.  Each slot is subdivided into two half-hour segments reflecting the    half-hour preceding the exact slot time and the half-hour after.  The tic marks  and the pointer fall exactly on the hour.  The presence of a graphics block in a slot or half-slot indicates the existance of an event. The description of the    event appears in a window at the bottom right corner of the calendar. The top    line of this window shows the half-hour time to the left of the pointer and the  bottom line shows the half-hour time to the right of the pointer.  These times   change with the movement of the pointer within a day. A text field will appear   at times where events exist.  This field will be blank for times which are free  or unscheduled.  Events may be inserted, deleted, copied, moved, or edited with  commands invoked by the SPACE bar.  A breakdown of a single day may be viewed or printed.  An extension file which describes details of an event can be created   or edited.  Commands are invoked by using the arrow keys to select then pressing the Return key or by keying the first letter of the command.                                                                                                                            Press any key to continue..........                                                                                                                                                                                                                                                                                              -----------  Numeric Keypad  ---------------                                                                                                                                  Previous Week                                                                          │                                                      Current Day ────────┐     │     ┌──────── Previous Month                                           ┌───┐ ┌───┐ ┌───┐ ┌───┐                                                          │Hom│ │  │ │PgU│ │ - │ Previous Hour / ½ Hour                                   └───┘ └───┘ └───┘ └───┘                                                          ┌───┐       ┌───┐                                             Previous Day ───── │- │       │ -│ ───── Next Day                                                 └───┘       └───┘                                                                ┌───┐ ┌───┐ ┌───┐ ┌───┐                                                          │End│ │  │ │PgD│ │ + │ Next Hour / ½ Hour                                       └───┘ └───┘ └───┘ └───┘                                     Terminate Copy ────────┘     │     └──────── Next Month                                                       │                                                                            Next Week                                                                                                                                                                                                                                                                                                                Press any key to continue..........                                                                                                                                                                                                                             Add Command                                   ──────────────────────────────────────────────────────────────────────────────── This command allows the scheduling of new events. The user is first prompted to  select the beginning time for the event. The pointer is now in half-step mode    and a secondary pointer appears in the description window just to the left of    the time. The "+" and "-" keys are used to select the beginning time for the new event. When the secondary pointer is positioned to the left of the desired time  press [Return]. The text portion of the window is now highlighted and the text   cursor is positioned at the left end. Any text up to 40 characters may be typed  terminated by [Return]. The user is now asked to select the ending time for the  event. This is accomplished in exactly the same way as the beginning time. When  [Return] is pressed a graphics block will appear in the selected day reflecting  the event and the description will appear in the window. Note that events may    not span days and must not overlap other events.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Press any key to continue..........                                                                                                                                                                                                                          Delete Command                                   ──────────────────────────────────────────────────────────────────────────────── This command deletes or cancels appointments or events. The user is prompted to  position the pointer to the event to be deleted. The pointer is now in half-step mode and a secondary pointer appears in the description window just to the left  of the time. The "+" and "-" keys are used to select a point somewhere within an event. The secondary pointer should be resting to the left of the time and the   description of the event. Pressing [Return] will delete the event. The graphics  block should disappear from the screen; however the text description will not    be erased until the pointer is moved again. If an extension file exists for the  event, the user is prompted whether to delete it also. In the multi-user version only the creator of an extension is allowed to delete it.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       Press any key to continue..........                                                                                                                                                                                                                            Copy Command                                   ──────────────────────────────────────────────────────────────────────────────── The Copy command allows the copying or replication of an event. An example of a  repeatable event might be a meeting which is held on the first Tuesday of each   month. The user is first prompted to select the event to be copied. The pointer  is now in half-step mode and a secondary pointer appears in the description area to the left of the time display. The keypad keys are used to select a point that is within the event to be copied. The secondary pointer should be addressing the time and description of the event. Pressing [Return] stores the event in memory  displays the prompt to select destination/s for the new event. The event will be copied to the same time of day; therefore, the pointer may be positioned to any  part of the desired day. Multiple copies may be made without reselecting the     original event. The [End] key on the keypad should be pressed instead of the     [Return] key for terminating the last copy. Extension files are not copied to    new locations because it may be desirable to create separate extensions for the  new events. If it is desirable to use the same extension file, use the Extend    command on the new event and when prompted for a filename, enter the same name   used with the original event.                                                                                                                                                                                                                                                                                                                             Press any key to continue..........                                                                                                                                                                                                                            Move Command                                   ──────────────────────────────────────────────────────────────────────────────── The Move command is used to move or reschedule an event at a different time. It  essentially recreates the event at the new time and deletes the old event. First the user must select the event to be moved using the keypad keys as shown in the first screen of this help facility. During this operation the pointer remains in half-step mode and the secondary pointer is displayed in the description window. When the desired event has been addressed, press [Return] to copy the event to   memory. The old event will disappear from the screen and the user will be asked  to select the beginning time for the new event. This is accomplished the same as in the Insert command by using the keypad keys and pressing [Return] when the    new day/time has been addressed. Extension files are moved to the new time and   must be deleted by the Extend command if not wanted. Unlike the Copy command,    the Move command can move an event to only one destination. Note that the new    time may overlap the old time if desired.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Press any key to continue..........                                                                                                                                                                                                                           Print Command                                   ──────────────────────────────────────────────────────────────────────────────── The Print command sends a report of a selected range of days to the printer. The user is prompted to select the beginning day for the report. The arrow keys on   the auxilary keypad move the pointer by day or week. Note that the pointer will  "wrap around" to Sunday or Saturday if it is on the last or first day of the     week when a right or left arrow is pressed. When the pointer rests within the    day desired for the beginning of the report press [Return] to lock it in. Now    the ending day must be selected in the same manner. The [PgDn] key can be used   to advance to the next month if needed. After the range has been chosen, the     type of printer must be determined (dot matrix or daisy wheel). Answer "Yes" to  the question if you have an Epson or IBM compatable printer and "No" if you have a non-graphics printer or if you are not sure. Make sure the printer is on and   is ready to accept output. The report produced is a graphical representation of  the schedule of events during the range of dates selected. Note that "*" are     used in the non-graphics mode instead of blocks. Six(6) blank lines are printed  at the end of each day for penciling in changes or additions to the schedule in  the field.                                                                                                                                                                                                                                                                                                                                                Press any key to continue..........                                                                                                                                                                                                                            Edit Command                                   ──────────────────────────────────────────────────────────────────────────────── The Edit command permits the changing of an event's start time, ending time or   text line. The pointer should be positioned anywhere within the event when the   program requests and the [Return] key pressed. The text cursor will be resting   at the beginning of the highlighted text field. The new text can be typed over   the top of the old line. Press [Return] to terminate the line. The new start and ending times are now selected in exactly the same way as in the Insert command.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     Press any key to continue..........                                                                                                                                                                                                                         Information File Editor                           ──────────────────────────────────────────────────────────────────────────────── F2 - Provides a template for meetings                                                                                                                             F3 - Positions the cursor five(5) spaces to the left.                                                                                                             F4 - Advances the cursor five(5) spaces to right                                                                                                                  F5 - Positions the cursor to the next "list" position                                                                                                             F6 - Reformats a paragraph after changes have been made.                                                                                                          F7 - Prints the information file.                                                                                                                                 F8 - Deletes the information file.                                                                                                                                F9 - Allows the changing of the filename used when editor was invoked                                                                                             F10 - Exits editor or terminates Info command                                                                                                                                                                                                                            Press any key to continue..........                                                                                                                                                                                                                           Editing Keys                                    ──────────────────────────────────────────────────────────────────────────────── ^W or [F10]. . . . . . . Finish editing                                          Esc. . . . . . . . . . . Abort edit and return original memo                     ^Y . . . . . . . . . . . Delete current line                                     ^T . . . . . . . . . . . Delete word right                                       ^B or [F6] . . . . . . . Reformat memo in the edit window                        Up arrow or ^E . . . . . Up one line                                             Down arrow or ^C . . . . Down one line                                           Left arrow or ^S . . . . Left one character                                      Right arrow or ^D. . . . Right one character                                     ^Left arrow or ^A. . . . Left one word                                           ^Right arrow or ^F . . . Right one word                                          HOME . . . . . . . . . . Beginning of current line                               END. . . . . . . . . . . End of current line                                     ^HOME. . . . . . . . . . Beginning of memo                                       ^END . . . . . . . . . . End of memo                                             PgUp . . . . . . . . . . Next edit window up                                     PgDn . . . . . . . . . . Next edit window down                                   ^PgUp. . . . . . . . . . Beginning of current window                             ^PgDn. . . . . . . . . . End of current window                                                         Press any key to continue..........                       