Enter a valid report file 
 supplied by the developer 
 of this software.
 Enter the report's description.
 HINT!  For easy selection from the
 menu and for sequence control use
 letters for your descriptions:  i.e. 
 A. This is your report description ..
 B. Another decription below ..
^$_^^
 Enter the destination of your report. 
 Leave blank and 
 ENTER for look up.
 Enter the printer control file.
 Leave blank and 
 ENTER for look up.
 Enter the port name.  Use 
 to select and 
 ENTER to
 continue.
 Enter the port type.  Use 
 to select and 
 ENTER to
 continue.  NOTE:  When directing 
 output to a serial port the DOS  
 MODE command in used.  MODE.COM  
 must be in your path.  This is
 routinely accomplished by a DOS  
 installation.  If you encounter  
 problems printing to the serial  
 ports check for MODE.COM to be
 in your path-DOS directory.
__^^_
__^^_
__^^_
__^^_
__^^_
 Enter the specific serial port name. 
 Use 
 to select and 
 ENTER to
 continue.
 Enter the baud rate.  Use 
 to select and 
 ENTER to
 continue.
 Enter the data bits.  Use 
 to select and 
 ENTER to
 continue.
 Enter the parity.  Use 
 to select and 
 ENTER to 
 continue.
 Enter the stop bits.  Use 
 to select and 
 ENTER to
 continue.
 Enter Y if this report requires a 
 giver number for a filter.
 Enter the giver's number.
 HINT!  Enter 0 (zero) for a
 look up box to select a giver 
 by name.
 Enter Y if this report requires a 
 service type for a filter.
 Enter Y if this report requires a 
 date range for a filter.
 Enter the begining date 
 for this report.
 Enter the ending date 
 for this report.
 The date type should
 always remain D1 unless  
 otherwise noted by any
 report instructions.
 Enter the first few letters of the last 
 name to go to givers whose last name
 begins with those letters.  The more of 
 the last name you type the closer the
 match.  Use 
 to narrow the search,
 ENTER to select.
 Use the top line menu to print the report.  You may also 
 add new reports.  Before you can run a report make sure  
 you have a valid report definition file.  There are
 custom report definition files available.  Call
 Fellowship Software for more details.
 To run a report hilight it and click on Print from the
 top line menu or use ALT-P.
_:^^_
Help!
  Select if you want 
  to see the Church  
  or Giver reports.  
 Use 
 to highlight the service 
 type  
 ENTER to select.
01      
02      
03      
04      
05      7
06      
07      s
08      -
09      
10      
11      )	
12      
13      ^
14      $
16      
17      .
18      
19      
GIVRTAB 
REPMNU  '
REPTYPE /
SVSMNU