Back In A Flash!
                      Command Line Restore Utility

                              Version 1.00

                         A product of CCT, Inc.
                          111 3rd Avenue South
                         Minneapolis, MN 55401
                             (612) 339-5870

        General
        -------
        The command line restore utility, CCTREST, is a handy utility
        for performing a full restoration of a system in the event of a
        system crash.  CCTREST allows a system to be restored after
        booting OS/2 off of diskettes and formatting the partitions.
        This is a great timesaver, since without this OS/2 would first
        need to be reloaded, then Back In A Flash!, and then finally the
        applications and data.


        What it is not
        --------------
        CCTREST is a specific utility, and as such it does not have many
        additional features.  CCTREST was designed for the non-swapping,
        character mode environment present after booting off of
        diskettes.  Therefore, the utility is small and fast.  For more
        full-featured restore capabilities, use the restore built into
        Back In A Flash!.


        Setup
        -----
        The only two files needed to use the command line restore
        utility are the CCTREST.EXE executable file, and CCTCMP01.DLL,
        the compression .DLL file.  These two files together total only
        about 53K, so they will both fit onto the second OS/2 2.1 boot
        diskette.  Alternatively, if you have used SEBOOT20 or one of
        the other utilities to create a single OS/2 boot diskette, you
        should place both of these files onto that diskette.  Note that
        if the device where the backup resides requires a device driver
        to be accessible (LAN, Bernoulli, Magneto-Optical) that driver
        must also be on the boot diskette with the appropriate entries
        in the config.sys file.

        Usage
        -----
        CCTREST is easy to use.  Once the partition for the restore has
        been formatted, use the following syntax to restore the data to
        the system :

                CCTREST [/o] <group> <location>

        where <group> is the name of the group ('FULL', for example) and
        location is the full path name to the archive file ('A:\', for
        example).   If some files already exist on the system that
        should be overwritten, specify the /o parameter.  Otherwise,
        CCTREST will prompt the operator when it trys to restore a file
        that already exists.

        Technical Support
        -----------------
        Full support is provided for this utility by CCT, Inc.  If
        technical assistance is required, contact CCT, Inc. at
        (612)339-5870 Monday through Friday, 7am to 7pm CST.