:
; The following file is the BPQ configuration used at NTSX:G8NPF-1
; It is included as an example only. The PMS does not require any TNCPORT's to
; be defined. It uses the BPQ Host Mode interface.
;
; ----------------------------------------------------------------------------
;     CONFIGURATION FILE FOR G8BPQ SWITCH SOFTWARE V 4.07a AND NPFPMS 2.16

HOSTINTERRUPT=127
EMS=0
DESQVIEW=1                      ; My system runs under DESQview

NODECALL=G8NPF-1                ;(Note: you don't HAVE to run a node!)
NODEALIAS=NTSX
BBSCALL=G8NPF-3
BBSALIAS=NPFPMS

IDMSG:
Network node (NTSX)   Braintree
***

UNPROTO=ID

INFOMSG:
NTSX Braintree, Essex.  A member of the Essex Packet Group.
To connect to another normal station (not another NODE), you must specify a
port number before the callsign.  i.e.  C 2 G6CHJ-3
Use the PORTS command to list the available ports.
The PMS command connects you to G8NPF's PMS. >
***

CTEXT:
Connected to NTSX Braintree, Essex.   A member of the Essex Packet Group.
***

;	Network System Parameters
OBSINIT=5			; INITIAL OBSOLESCENCE VALUE
OBSMIN=4			; MINIMUM TO BROADCAST
NODESINTERVAL=60                ; 'NODES' INTERVAL IN MINS
IDINTERVAL=15                   ; 'ID' BROADCAST INTERVAL
BTINTERVAL=0                    ; BEACON INTERVAL
L3TIMETOLIVE=25			; MAX L3 HOPS
L4RETRIES=3			; LEVEL 4 RETRY COUNT
L4TIMEOUT=120			; LEVEL 4 TIMEOUT
L4DELAY=10			; LEVEL 4 DELAYED ACK TIMER
L4WINDOW=4			; DEFAULT LEVEL 4 WINDOW
MAXLINKS=30			; MAX LEVEL 2 LINKS (UP,DOWN AND INTERNODE)
MAXNODES=120			; MAX NODES IN SYSTEM
MAXROUTES=35			; MAX ADJACENT NODES
MAXCIRCUITS=64			; NUMBER OF L4 CIRCUITS
MINQUAL=15                      ; MINIMUM QUALITY TO ADD TO NODES TABLE 
BBSQUAL=250                     ; BBS Quality relative to NODE
BUFFERS=255                     ; PACKET BUFFERS - 255 MEANS ALLOCATE MAX

;       TNC default parameters
PACLEN=128                      ; max packet size
TRANSDELAY=1                    ; transparent mode send delay - 1 sec
;	Level 2 Parameters
T3=180                          ; link validation timer (3 mins)
IDLETIME=300                    ; idle link shutdown timer (5 mins)    

;	Configuration Options
BBS=1                           ; Include BBS support
NODE=1                          ; Include SWITCH support (or =0 for no node)
HIDENODES=1                     ; If set to 1, nodes starting with # will 
                                ; only be displayed by a NODES * command

ENABLE_LINKED=N                 ; Disable  ***LINKED TO  command


;       AX25 port definitions
PORT
        PORTNUM=1
        ID=144.650
        UNPROTO=MAIL
        CWID=G8NPF
        TYPE=DRSI
        PROTOCOL=HDLC
        IOADDR=300H
        INTLEVEL=7
        SPEED=1200
        CHANNEL=A
        QUALITY=10
        MAXFRAME=2
        TXDELAY=250
        SLOTTIME=100
        PERSIST=38
        FULLDUP=0
        SOFTDCD=1
        FRACK=7000
        RESPTIME=3000
        RETRIES=15
        PACLEN=128
        DIGIFLAG=255            ; 0=disable  1=enable  255=digi UI only
        DIGIPORT=0              ; 0=this port,  N=port N
        USERS=0                 ; Limit on L2 sessions   0=unlimited
        MHEARD=Y
ENDPORT

PORT
        PORTNUM=2
        ID=70.4875 link to ESX
        CWID=G8NPF
        UNPROTO=MAIL
        TYPE=DRSI
        PROTOCOL=HDLC
        IOADDR=300H
        INTLEVEL=7
        SPEED=1200
        CHANNEL=B
        QUALITY=10
        MAXFRAME=2
        TXDELAY=250
        SLOTTIME=100
        PERSIST=38
        FULLDUP=0
        SOFTDCD=1
        FRACK=7000
        RESPTIME=3000
        RETRIES=15
        PACLEN=128
        DIGIFLAG=255
        DIGIPORT=0
        USERS=0
        MHEARD=N
ENDPORT

PORT
        PORTNUM=3
        ID=432.675
        UNPROTO=MAIL
        TYPE=ASYNC
        PROTOCOL=KISS
        IOADDR=3F8H                     ; COM1 - for COM2 put =2F8H
        INTLEVEL=4                      ; COM1 - for COM2 put =3
        SPEED=9600
        CHANNEL=A
        QUALITY=10
        MAXFRAME=2
        TXDELAY=250
        SLOTTIME=100
        PERSIST=38
        FULLDUP=0
        FRACK=7000
        RESPTIME=3000
        RETRIES=15
        PACLEN=128
        DIGIFLAG=255
        DIGIPORT=0
        USERS=0
        MHEARD=Y
ENDPORT

PORT
        PORTNUM=4
        ID=144.625 TCP/IP only
;       UNPROTO=MAIL                    ; No mail beacon on this channel
        TYPE=ASYNC
        PROTOCOL=KISS
        IOADDR=2F8H                     ; COM2 - for COM1 put 3F8H
        INTLEVEL=3                      ; COM2 - for COM1 put 4
        SPEED=9600
        CHANNEL=A
        QUALITY=0                       ;0=Suppress nodes broadcasts & routes
        MAXFRAME=2
        TXDELAY=250
        SLOTTIME=100
        PERSIST=38
        FULLDUP=0
        FRACK=7000
        RESPTIME=3000
        RETRIES=15
        PACLEN=128
        DIGIFLAG=255
        DIGIPORT=0
        USERS=0
        MHEARD=N
ENDPORT

PORT
;       Loopback for TCP/IP to node link.
        PORTNUM=5
        ID=Node to TCP/IP link
        TYPE=INTERNAL
        PROTOCOL=KISS
        QUALITY=250
        MAXFRAME=1
        FRACK=7000
        RESPTIME=1000
        RETRIES=15
        PACLEN=128
ENDPORT

ROUTES:
G8NPF-5,90,5
G7DLI-1,100,1
G6NHK-8,100,1
G1NNB,100,2
G1NNA,100,3
G6NHK-8,110,3
G0DEC-1,100,3
***

;       Applications supported.
APPLICATIONS=PMS,HOST,SYSOP,CHAT