SHELP_PRN
 VASCII Codes
 \ASCII codes are the actual letters or codes that can be
seen on the screen. Most of these letters can be entered
directly from you keyboard.  Some codes (like the ESC
 	key) are entered using their decimal equivalent.
 LFor example, to enter an ESC, hold down the ALT key and
enter its decimal value of 027 then release the Alt key.
You will see a '
', its screen character.
 SMost printers use an ESC to start a printer code.  For
example:
 wHP LASER 
 Condensed on: 
 +Decimal Vaule: 027 038 107 050 083
 KYou can toggle between the ASCII and DECIMAL value using
the F10 key.
 APress RETURN for help menu
pHELP_PRN
 WWhat to Enter
The codes are unique for each printer and will control
the different features it offers.  They are normally
listed in the user manual for each printer.
Note that
not all printers support all features.  If you find a
 	code that isn't listed, look for a synonym.
 QFor example,  some printers refer to EMPHASIZED while
 	others call it BOLD.  Both mean the same.
 SIf you can not find a printer code for a feature,
leaving it blank will usually work just fine.
Press RETURN for help menu
Copyright 1989, Eckenroed & Associates  
lHELP_PRN
 UDecimal Codes
 [Decimal codes are the decimal equivalent to the ASCII
 	codes.  Any code (including the NULL character) can be
entered using its decimal code.  Each code is a number
between 0 and 255.  Leading zeros don't need to be
entered.  Each code must be seperated from the next with
a space.
 tFor example:
 5HP LASER 
 Pica pitch: 027 038 107 048 083
ASCII values: 
 [You can toggle between DECIMAL and ASCII modes by
using the F10 key.
 yPress RETURN for help menu
 :File Name
Enter any valid file name.  The report
will be saved with that name.
 GWarning
If the file already exists, it will be
replaced.
HOW MANY COPIES?
 >Enter the number of copies to be printed
for this report.
How many copies? Enter the number of copies to be printed
for this report.
Printer:  Select the printer and port to be used for this
report.  The choices are listed to the right.  Use
the arrow keys to choose one.  If you are unsure,
use LPT1.
Setup Printer/Port: Setup or change the Printer and/or
port assignment.
AASCII   
DDECIMAL 
WCODE    
PPRNTCODE	-
TTOGGLES 
ERETURN  
 ~Updating Printer Codes
 7ASCII Code
This screen is used to enter the
Decimal Code  
control codes for your printer.  You
What To Enter 
may enter the codes in either ASCII
Print Codes
or DECIMAL modes.  To find out more,
Toggle Switch 
select a topic from the menu on the
Exit Help
right and press the ENTER.
(ss00
0pqqs
(ss00
0pqqs
(ss00
0pqqs
(ss00
0pqqs
(ss00
0pqqs
(ss00
0pqqs
Printer Setup
1.  Maintain a printer file
 !Procedures
or add a new one
2.  Setup your printer ports
 8to your specific machine
3.  Test your printer setup to
 6see if it prints the way
 8you want it to
HELP_PRN
 "Print Codes
 vSetup
: Code that sets up your printer to print your report.
Finishup
: Code that will reset your printer to its original settings.
: Sets your printer pitch to 10 cpi.
  Elite
: Sets your printer pitch to 12 cpi.
  Condensed
: Sets your printer pitch to 17 cpi.  Also called COMPRESSED.
Double Width: Prints characters at a double-width.
Super-script: Prints characters as a super-script.
Sub-script  : Prints characters as a sub-script.
  Enhanced
: Also called DOUBLE STRKE.  Characters are darker than normal.
Emphasized  : Also called BOLD.  Characters are darkest.
Italics
: Code to print in Italics style.
 #Underline
: Code to underline characters.
 %Utility
: Draft mode.
 7NLQ
 	: Prints your report in Letter or Near Letter Quality.
High Speed  : High Speed draft quality print.
 #Char. set
: Used to switch the character set to a differt one.  Used
mostly for foriegn language and scientific sets.
User Defined: Custom defined control strings for defined types of printing.
 	PRINTER ERROR
The printer is not responding to the computer.
 "Possible reasons include:
1.  Printer turned off
 :2.  Printer unplugged
 ;3.  Out of paper
 @4.  "On-line" light is not light.
 /5.  Cable is loose between the printer and
 *the computer.
Check the above.  Turn the printer off then
 %back on and retry.
 aOptions  Document may be sent to a printer, the
 *screen, or a disk file.  After being viewed
 %on the screen, it may also then be printed.
USE THESE KEYS TO MOVE ABOUT
Scrolls down one line
Scrolls up one line
PgDn  Scrolls down one screen
PgUp  Scrolls up one screen
^PgDn  Goes to the bottom
^PgUp  Goes to the top
Goes to the bottom
HOME  Goes to the top
Moves left 5 columns
Moves right five columns
Moves to far left
Moves to far right
Jump to a specified line
Search for a string
^ means pressed with Ctrl key
 HELP_PRN
 QToggles
 ^The F10 key will toggle you between two different modes
of entering the printer codes:  ASCII or DECIMAL.
 KChoose the one closest to the way your printer manual is
used.
Press RETURN for help menu
 OUpdate Printer Controls
You can either type them in with the ASCII code or
Decimal equivalent.
Example:  ASCII 
&d0D Decimal  027 038 100 048 068
As you can see it would be a lot quicker to enter
the codes in ASCII.  To enter codes in ASCII
all you need to do is hold the Alt key down while
typing in the decimal code.  This is only neccessary
 	when the key is not on the keyboard.
 VNote: Null character <
> MUST be entered in the
Decimal mode.
  Update Printer Controls
 Updating the Printer
 controls is quite easy
 with Report3 Setup 2.0.
 You have either type them  
 in with the ASCII code or  
 Decimal equivalent.
 ASCII
Decimal
&d0D 027 038 100 048 068  
 As you can see it would
 be a lot quicker to enter  
 the codes in ASCII.
 To enter codes in ASCII
 ALl you need to do is hold 
 the Alt key down while
 typing in the decimal code 
 	F10 Toggle
 This is only neccessary
 when the key is not on the 
ASCII
 keyboard.
Decimal modes
 Note: Null character <
 MUST be entered in the
027 038 100 048 068
 Decimal mode.
aASCII   
CODE    
COPYRITE\
DECIMAL 
FILENAME
GET_CPY 
GET_CPY2
HELP_PRN@
MAIN    |
PRNTCODE
PRNT_ERR
ROUTE   A
SHOWFIL 
TOGGLES 
UPD_PRN I
UPD_VAR