The Metro-X X-server is supporting the following touch screen controllers:
EloGraphics
Lucas Deeco
MicroTouch
Joystick driver For information check here. An FTP archive can be found at here.
Currently supported joysticks are:
Amiga joysticks on Amiga
CH Flightstick Pro compatibles with additional two hats and two buttons
DirectPad Pro parallel port joystick interfaces ( here)
FP Gaming Assasin 3D ( here)
Gamepads with 6 and 8 buttons
Genius Flight2000 Digital F-23 ( here)
Gravis Blackhawk Digital ( here)
Gravis GamePad Pro ( here)
Gravis Xterminator GamePad ( here)
Logitech CyberMan 2 ( here)
Logitech ThunderPad Digital
Logitech WingMan Extreme Digital ( here)
MadCatz Panther ( here)
MadCatz Panther XL ( here)
Microsoft SideWinder 3D Pro ( here)
Microsoft SideWinder Force Feedback Pro ( here)
Microsoft SideWinder GamePad ( here)
Microsoft SideWinder Precision Pro ( here)
Multisystem joysticks (Atari, Amiga, Commodore, Amstrad)
Multisystem joysticks using 0.8.0.2 hw interface
Nintendo Entertainment System (and clone - SVI, Pegasus ...) gamepads
PDPI Lightning L4 gamecard ( here)
Sega Genesis (MegaDrive) gamepads
Sega Master System gamepads
Sega Saturn gamepads
SNESKey parallel port joystick interfaces
Sony PlayStation gamepads
Standard joysticks with 2, 3 or 4 axes, and up to 4 buttons
Super Nintendo Entertainment System gamepads
ThrustMaster FCS compatibles with additional hat
ThrustMaster Millenium 3D Inceptor ( here)
ThrustMaster Rage 3D ( here)
TurboGraFX parallel port joystick interface ( here)
A couple of programs are available that support TV tuners. These are:
All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal Composite/S-VHS inputs are supported. Teletext and Intercast support (PAL only) via VBI samples decoding in software.
Adlink 7200 Digital I/O device here
Adlink 7300A Digital I/O device here
CMOS Video Conferencing Kit. The video capture card has a Bt849 chipset. It comes with a CCD camera.
Data Translation DT2803
Data Translation DT2851 Frame Grabber here
Data Translation DT3155 here
Diamond DTV2000 (based on Bt848)
Dipix XPG1000/FPG/PPMAPA (based on TI C40 DSP). Most add-on cards are supported. here or here. The driver can be found at here
Epix SVM
Epix Silicon Video MUX series of video frame grabbing boards here
FAST Screen Machine II here
Hauppage Wincast TV PCI (based on Bt848) here
Imaging Technology ITI/IC-PCI here
ImageNation Cortex I here
ImageNation CX100 here
ImageNation PX500 here
ImageNation PXC200 here
Imaging Technology Inc. IC-PCI frame grabber board here
Matrix Vision MV-Delta here
Matrox Meteor here
Matrox PIP-1024 here
MaxiTV/PCI (based on ZR36120) here
Miro PCTV (based on Bt848) here
MuTech MV1000 PCI here
MuTech MV200 here
Philips PCA10TV (not in production anymore) here
Pinnacle PCTV (based on Bt848)
Pro Movie Studio here
Quanta WinVision B&W video capture card here
Quickcam here
Nomadic Technologies Sensus 700 here for common information. Alas, Nomadic Technologies has removed the page about the Sensus 700.
Smart Video Recoder III (based on Bt848) here
STB TV PCI Television Tuner (based on Bt848) here
Tekram C210 (based on ZR36120) here
Video Blaster, Rombo Media Pro+ here
VT1500 TV cards here
Currently there are five programs which can be used in combination with digital cameras.
Camediaplay ( here) You can download it from here
JCAM, a Java application which allows digital camera owners to access and download pictures from a wide variety of popular digital cameras ( here) It can be downloaded from here
Photopc can be extended with a graphical Tk frontend. This can be found at here. Also Qvplay cab be extended with a graphical Tk frontend, which can be found at here
Casio QV10, QV-10A, QV-11, QV-30, QV-70, QV-100, QV-200, QV-300, QV-700, QV-770 (qvplay) here
Casio QV-10A, QV-11, QV-30, QV-70, QV-100, QV-300, QV-700, QV-770 (JCAM)
Chinon ES-1000 (same hardware, protocol and image format as Kodak DC20) (JCAM) here
Epson "Colorio Photo" CP-100 (PhotoPC) (photopc, camediaplay) here
Epson "Colorio Photo" CP-200 (PhotoPC 500) (photopc, camediaplay, JCAM) here
Epson "Colorio Photo" CP-200 (PhotoPC 550) (JCAM)
Epson "Colorio Photo" CP-500 (PhotoPC 600) (photopc, camediaplay, JCAM) here
Epson "Colorio Photo" CP-500 (PhotoPC 700) (JCAM)
Epson PhotoPC 550 (photopc, camediaplay) here
Fuji DS-7, DX-5 (DS-10), DX-7 (DS-20), DX-9 (DS-30), DS-300, MX-700 (JCAM)
HP Photo Smart Digital Camera (Some people say it is supported, others say it isn't !!??)
Kodak DC-20, DC-25, DC-200/210 (JCAM) here
Olympus C-300L, C-320L, C-420L, C-800L, C-840L, C-1000L, C-1400L (JCAM) here
Olympus "Camedia" C-400L (D-200L) (photopc, camediaplay, JCAM) here
Olympus "Camedia" C-820L (D-320L) (photopc, camediaplay, JCAM) here
Olympus C2000Z (photocd)
Sanyo VPC-G200/G200EX (photopc, camediaplay) here
Sanyo DSC-V1 (VPC-G200E) (photopc, camediaplay) here
Sanyo DSC-X1 (VPC-X300) (JCAM)
Sanyo DSC-X300 (photopc, camediaplay) here
Nikon Coolpix 600/900 (Coolpix 600 untested) (photopc) here and here
Sierra Imaging SD640 (photopc) here
Toshiba PDR-2 (not sure: photopc) here
Various other UPS's are supported, read the UPS HOWTO
APC SmartUPS here
APC-BackUPS 400/600, APC-SmartUPS SU700/1400RM here
Fenton PowerPal here for downloads and manuals. Web site information can be found at here
Fenton Tele-UPS here for downloads and manuals. Web site information can be found at here
Fenton PowerOn here for downloads and manuals. Web site information can be found at here
UPS's with RS-232 monitoring port (genpower package) here
A daemon to shut down and up computers connected to ups's. It's network aware and allows server- and client-mode here
CED 1401
DBCC CAMAC
IEEE-488 (GPIB, HPIB) boards
Keithley DAS-1200
National Instruments AT-MIO-16F / Lab-PC+
Analog Devices RTI-800/815 ADC/DAC board contact Paul Gortmaker < gpg109@anu.edu.au >
Berkshire Products PC Watchdog Card (ISA cards rev. A and C) Check here for the PC Watchdog program. A driver is included in recent kernels. More information on this product can be found at here
ICS WDT500-P here
ICS WDT501-P (with and without fan tachometer) here
Outsource Engineering & Manufacturing Inc. Basic Watchdog Timer Board (ISA) Information can be found at here. Drivers currently running on 2.0.29, 2.0.33 and 2.0.36 kernels