General/Modem Setup Help

        This module allows you to setup miscellaneous options that effect
        several features of ClickComm and your modem.

        Simply move the 'X' to the desired selection, or type in the value, and
        proceed to the next field.  As you move from field to field you will
        notice the messages at the bottom of the screen will change.  These are
        quick help  messages.


        Keyboard interaction
        --------------------

        TAB/Shift-TAB           : Moves you from one option to another option.

        Enter                   : Moves you from one option to another option.

        Up/Dn Cursor Keys       : This will move the 'X' placed next to the
                                  selected item in this field.

        Left/Right Cursor Keys  : Moves you left and right in the field.

        Ctrl - Right Cursor,    : increases/decrease the Keyboard and mouse
        Ctrl - Left Cursor        click rate.

        Alt - D                 : Deletes the value in the field.

        Home                    : Places you at the begining of the field.
 
        End                     : Places you at the end of the field.

        Escape/Alt - C          : Aborts and Exits this Module

        Alt - O                 : Saves all changes and exits this module.

        Alt - H                 : Provides help for this module


        Mouse Interaction
        -----------------

        Selecting an option: Left Click on the option you desire to change. If
                             it is button field, it will move the 'X' to the
                             value you click on.  If it is a string field,
                             it will place the cursor at the start of that
                             field.

        Saving changes     : Left Click on the OK

        Help               : Left Click Help

        Aborting           : Left Click Cancel or '■'




┌─[■]───────────────── General & Modem/Dialing Options ──────────────────────┐
│                                                                            │
│ Hang-Up Prompt  ANSI Music          Adlib/Blaster   Scroll Back Buffer: 0··│
│ [X] On          [X] On              [ ] On         Capture File Buffer: 1··│
│ [ ] Off         [ ] Off             [X] Off                  Dial Time: 45·│
│                                                           Redial Pause: 1··│
│ Initialization: ATZ·····································                   │
│                                                                            │
│ Dialing Prefix: ATDT················  No Connect Str's: NO DIAL TONE·······│
│ Dialing Suffix: ····················                    VOICE··············│
│ Connect String: CONNECT·············                    BUSY···············│
│ Hang-Up String: ~~~+++~~~ATH0·······                    NO CARRIER·········│
│                                                                            │
│                       Keyboard and Mouse Click Rate                        │
│                SLOW │▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒│ FAST                │
│                                                                            │
│                      OK   ▄        Help  ▄       Cancel ▄                  │
│                    ▀▀▀▀▀▀▀▀       ▀▀▀▀▀▀▀▀       ▀▀▀▀▀▀▀▀                  │
└────────────────────────────────────────────────────────────────────────────┘

1 - Hang-Up Prompt

        Turns on or off the box that prompts you whether you want to hangup the
        modem.

2 - ANSI Music

        Turns on or off ClickComms ability to play ANSI music.

3 - Adlib/Blaster

        Turns on or off the porting of ANSI music to an Adlib or Sound Blaster
        Card.

4 - Scroll Back Buffer

        Sets the number of lines you wish the scroll back buffer to handle.

        The maximum number of lines the scroll back buffer will handle is
        255.  If it reaches this point it will purge the lines at the beginning
        of the buffer.

        To activate the scroll back buffer hit Alt - B.  You will be presented
        with a screen of data that has previously been captured to this buffer.
        You can scroll through this screen using your PgUp, PgDn, Left, and
        Right cursor keys.  Hit Escape to exit back to terminal mode.


5 - Capture File Buffer

        Not currently in use.  Future expansion.


6 - Dial Time

        Sets the amount of time, in seconds, to wait before dialing the next
        tagged dialing directory entry.


7 - Redial Pause

        Sets the amount of time, in seconds, to pause between dialing tagged
        directory entries.


8 - Initialization

        This is the string of modem commands you wish ClickComm to use when
        resetting/initializing your modem.


9 - Dialing Prefix

        This is the dialing prefix you wish to use when dialing a entry.

        ie: ATDT - Modem would receive the command ATDT###-####

        ATD - Dial Tone
        ATP - Pulse Tone
        ,   - insert a 2 seconds delay.
        @   - insert a 5 second delay
        w   - wait for a dial tone before proceeding
              (not available on all modems)
        "   - tells modem to treat alphabetic characters as numbers.
              (not available on all modems)
        r   - reverse originate/answer frequencies.  used before or after
              phone number when calling a modem that is designed only to
              orginate phone calls, no to receive them.
        !   - Flash the switch hook.  The modem goes off hook for .5 seconds,
              on hook for .5 second, then off hook again. used with certain
              phone systems to transfer calls etc., as well as certain cases
              where multiple modems share a single phone line.
              (not available on all modems)


10 - Dialing Suffix

        This is the dialing suffix you wish to use when dialing a entry.

        ,   - insert a 2 seconds delay.
        @   - insert a 5 second delay
        w   - wait for a dial tone before proceeding
              (not available on all modems)
        "   - tells modem to treat alphabetic characters as numbers.
              (not available on all modems)
        r   - reverse originate/answer frequencies.  used before or after
              phone number when calling a modem that is designed only to
              orginate phone calls, no to receive them.
        !   - Flash the switch hook.  The modem goes off hook for .5 seconds,
              on hook for .5 second, then off hook again. used with certain
              phone systems to transfer calls etc., as well as certain cases
              where multiple modems share a single phone line.
              (not available on all modems)

11 - Connect String

        This is the string of characters ClickComm will look for to determine
        if a successful connection has been established.


12 - Hang-Up String

        This is the string of characters ClickComm will issue to the modem
        when you instruct ClickComm to hangup the modem.


13 - No Connect Strings

        These are strings of characters that ClickComm will look for to
        determine whether a connection has been made or possible.


14 - Keyboard and Mouse Click Rate


        The keyboard and mouse click rate sets the speed at which your keyboard
        and mouse will operate at.


