Path: senator-bedfellow.mit.edu!enterpoop.mit.edu!usc!elroy.jpl.nasa.gov!ames!purdue!not-for-mail From: spaf@cs.purdue.edu (Gene Spafford) Newsgroups: news.announce.newusers,news.answers Subject: A Primer on How to Work With the Usenet Community Supersedes: Followup-To: news.newusers.questions Date: 26 Apr 1993 00:01:31 -0500 Organization: Dept. of Computer Sciences, Purdue Univ. Lines: 367 Approved: spaf@cs.purdue.edu Expires: 25 Jun 93 17:01:30 GMT Message-ID: NNTP-Posting-Host: ector.cs.purdue.edu Xref: senator-bedfellow.mit.edu news.announce.newusers:1076 news.answers:7884 Archive-name: usenet-primer/part1 Original-author: chuq@apple.COM (Chuq Von Rospach) Comment: enhanced & edited until 5/93 by spaf@cs.purdue.edu (Gene Spafford) Last-change: 25 Apr 1993 by spaf@cs.purdue.edu (Gene Spafford) A Primer on How to Work With the USENET Community Chuq Von Rospach *** You now have access to Usenet, a network of thousands of computers. Other documents or your system administrator will provide detailed technical documentation. This message describes the Usenet culture and customs that have developed over time. All new users should read this message to find out how Usenet works. *** *** (Old users could read it, too, to refresh their memories.) *** USENET is a large collection of computers that share data with each other. It is the people on these computers that make USENET worth the effort to read and maintain, and for USENET to function properly those people must be able to interact in productive ways. This document is intended as a guide to using the net in ways that will be pleasant and productive for everyone. This document is not intended to teach you how to use USENET. Instead, it is a guide to using it politely, effectively and efficiently. Communication by computer is new to almost everybody, and there are certain aspects that can make it a frustrating experience until you get used to them. This document should help you avoid the worst traps. The easiest way to learn how to use USENET is to watch how others use it. Start reading the news and try to figure out what people are doing and why. After a couple of weeks you will start understanding why certain things are done and what things shouldn't be done. There are documents available describing the technical details of how to use the software. These are different depending on which programs you use to access the news. You can get copies of these from your system administrator. If you do not know who that person is, they can be contacted on most systems by mailing to account "usenet". Never Forget that the Person on the Other Side is Human Because your interaction with the network is through a computer it is easy to forget that there are people "out there." Situations arise where emotions erupt into a verbal free-for-all that can lead to hurt feelings. Please remember that people all over the world are reading your words. Do not attack people if you cannot persuade them with your presentation of the facts. Screaming, cursing, and abusing others only serves to make people think less of you and less willing to help you when you need it. If you are upset at something or someone, wait until you have had a chance to calm down and think about it. A cup of (decaf!) coffee or a good night's sleep works wonders on your perspective. Hasty words create more problems than they solve. Try not to say anything to others you would not say to them in person in a room full of people. Don't Blame System Admins for their Users' Behavior Sometimes, you may find it necessary to write to a system administrator about something concerning his or her site. Maybe it is a case of the software not working, or a control message escaped, or maybe one of the users at that site has done something you feel requires comment. No matter how steamed you may be, be polite to the sysadmin -- he or she may not have any idea of what you are going to say, and may not have any part in the incidents involved. By being civil and temperate, you are more likely to obtain their courteous attention and assistance. Be Careful What You Say About Others Please remember -- you read netnews; so do as many as 3,000,000 other people. This group quite possibly includes your boss, your friend's boss, your girl friend's brother's best friend and one of your father's beer buddies. Information posted on the net can come back to haunt you or the person you are talking about. Think twice before you post personal information about yourself or others. This applies especially strongly to groups like soc.singles and alt.sex but even postings in groups like talk.politics.misc have included information about the personal life of third parties that could get them into serious trouble if it got into the wrong hands. Be Brief Never say in ten words what you can say in fewer. Say it succinctly and it will have a greater impact. Remember that the longer you make your article, the fewer people will bother to read it. Your Postings Reflect Upon You -- Be Proud of Them Most people on USENET will know you only by what you say and how well you say it. They may someday be your co-workers or friends. Take some time to make sure each posting is something that will not embarrass you later. Minimize your spelling errors and make sure that the article is easy to read and understand. Writing is an art and to do it well requires practice. Since much of how people judge you on the net is based on your writing, such time is well spent. Use Descriptive Titles The subject line of an article is there to enable a person with a limited amount of time to decide whether or not to read your article. Tell people what the article is about before they read it. A title like "Car for Sale" to rec.autos does not help as much as "66 MG Midget for sale: Beaverton OR." Don't expect people to read your article to find out what it is about because many of them won't bother. Some sites truncate the length of the subject line to 40 characters so keep your subjects short and to the point. Think About Your Audience When you post an article, think about the people you are trying to reach. Asking UNIX(*) questions on rec.autos will not reach as many of the people you want to reach as if you asked them on comp.unix.questions or comp.unix.internals. Try to get the most appropriate audience for your message, not the widest. It is considered bad form to post both to misc.misc, soc.net-people, or misc.wanted and to some other newsgroup. If it belongs in that other newsgroup, it does not belong in misc.misc, soc.net-people, or misc.wanted. If your message is of interest to a limited geographic area (apartments, car sales, meetings, concerts, etc...), restrict the distribution of the message to your local area. Some areas have special newsgroups with geographical limitations, and the recent versions of the news software allow you to limit the distribution of material sent to world-wide newsgroups. Check with your system administrator to see what newsgroups are available and how to use them. If you want to try a test of something, do not use a world-wide newsgroup! Messages in misc.misc that say "This is a test" are likely to cause large numbers of caustic messages to flow into your mailbox. There are newsgroups that are local to your computer or area that should be used. Your system administrator can tell you what they are. Be familiar with the group you are posting to before you post! You shouldn't post to groups you do not read, or post to groups you've only read a few articles from -- you may not be familiar with the on-going conventions and themes of the group. One normally does not join a conversation by just walking up and talking. Instead, you listen first and then join in if you have something pertinent to contribute. Be Careful with Humor and Sarcasm Without the voice inflections and body language of personal communications, it is easy for a remark meant to be funny to be misinterpreted. Subtle humor tends to get lost, so take steps to make sure that people realize you are trying to be funny. The net has developed a symbol called the smiley face. It looks like ":-)" and points out sections of articles with humorous intent. No matter how broad the humor or satire, it is safer to remind people that you are being funny. But also be aware that quite frequently satire is posted without any explicit indications. If an article outrages you strongly, you should ask yourself if it just may have been unmarked satire. Several self-proclaimed connoisseurs refuse to use smiley faces, so take heed or you may make a temporary fool of yourself. Only Post a Message Once Avoid posting messages to more than one newsgroup unless you are sure it is appropriate. If you do post to multiple newsgroups, do not post to each group separately. Instead, specify all the groups on a single copy of the message. This reduces network overhead and lets people who subscribe to more than one of those groups see the message once instead of having to wade through each copy. Please Rotate Messages With Questionable Content Certain newsgroups (such as rec.humor) have messages in them that may be offensive to some people. To make sure that these messages are not read unless they are explicitly requested, these messages should be encrypted. The standard encryption method is to rotate each letter by thirteen characters so that an "a" becomes an "n". This is known on the network as "rot13" and when you rotate a message the word "rot13" should be in the "Subject:" line. Most of the software used to read usenet articles have some way of encrypting and decrypting messages. Your system administrator can tell you how the software on your system works, or you can use the Unix command "tr [a-z][A-Z] [n-z][a-m][N-Z][A-M]". (Note that some versions of Unix don't require the [] in the "tr" command. In fact, some systems will get upset if you use them in an unquoted manner. The following should work for everyone, but may be shortened on some systems: tr '[a-m][n-z][A-M][N-Z]' '[n-z][a-m][N-Z][A-M]' Don't forget the single quotes!) Summarize What You are Following Up When you are following up someone's article, please summarize the parts of the article to which you are responding. This allows readers to appreciate your comments rather than trying to remember what the original article said. It is also possible for your response to get to some sites before the original article. Summarization is best done by including appropriate quotes from the original article. Do not include the entire article since it will irritate the people who have already seen it. Even if you are responding to the entire article, summarize only the major points you are discussing. When Summarizing, Summarize! When you request information from the network, it is common courtesy to report your findings so that others can benefit as well. The best way of doing this is to take all the responses that you received and edit them into a single article that is posted to the places where you originally posted your question. Take the time to strip headers, combine duplicate information, and write a short summary. Try to credit the information to the people that sent it to you, where possible. Use Mail, Don't Post a Follow-up One of the biggest problems we have on the network is that when someone asks a question, many people send out identical answers. When this happens, dozens of identical answers pour through the net. Mail your answer to the person and suggest that they summarize to the network. This way the net will only see a single copy of the answers, no matter how many people answer the question. If you post a question, please remind people to send you the answers by mail and at least offer to summarize them to the network. Read All Follow-ups and Don't Repeat What Has Already Been Said Before you submit a follow-up to a message, read the rest of the messages in the newsgroup to see whether someone has already said what you want to say. If someone has, don't repeat it. Check the Headers When Following Up The news software has provisions to specify that follow-ups to an article should go to a specific set of newsgroups -- possibly different from the newsgroups to which the original article was posted. Sometimes the groups chosen for follow-ups are totally inappropriate, especially as a thread of discussion changes with repeated postings. You should carefully check the groups and distributions given in the header and edit them as appropriate. If you change the groups named in the header, or if you direct follow-ups to a particular group, say so in the body of the message -- not everyone reads the headers of postings. Be Careful About Copyrights and Licenses Once something is posted onto the network, it is *probably* in the public domain unless you own the appropriate rights (most notably, if you wrote the thing yourself) and you post it with a valid copyright notice; a court would have to decide the specifics and there are arguments for both sides of the issue. Now that the US has ratified the Berne convention, the issue is even murkier (if you are a poster in the US). For all practical purposes, though, assume that you effectively give up the copyright if you don't put in a notice. Of course, the *information* becomes public, so you mustn't post trade secrets that way. When posting material to the network, keep in mind that material that is UNIX-related may be restricted by the license you or your company signed with AT&T and be careful not to violate it. You should also be aware that posting movie reviews, song lyrics, or anything else published under a copyright could cause you, your company, or members of the net community to be held liable for damages, so we highly recommend caution in using this material. Cite Appropriate References If you are using facts to support a cause, state where they came from. Don't take someone else's ideas and use them as your own. You don't want someone pretending that your ideas are theirs; show them the same respect. Mark or Rotate Answers and Spoilers When you post something (like a movie review that discusses a detail of the plot) which might spoil a surprise for other people, please mark your message with a warning so that they can skip the message. Another alternative would be to use the "rot13" protocol to encrypt the message so it cannot be read accidentally. When you post a message with a spoiler in it make sure the word "spoiler" is part of the "Subject:" line. Spelling Flames Considered Harmful Every few months a plague descends on USENET called the spelling flame. It starts out when someone posts an article correcting the spelling or grammar in some article. The immediate result seems to be for everyone on the net to turn into a 6th grade English teacher and pick apart each other's postings for a few weeks. This is not productive and tends to cause people who used to be friends to get angry with each other. It is important to remember that we all make mistakes, and that there are many users on the net who use English as a second language. There are also a number of people who suffer from dyslexia and who have difficulty noticing their spelling mistakes. If you feel that you must make a comment on the quality of a posting, please do so by mail, not on the network. Don't Overdo Signatures Signatures are nice, and many people can have a signature added to their postings automatically by placing it in a file called "$HOME/.signature". Don't overdo it. Signatures can tell the world something about you, but keep them short. A signature that is longer than the message itself is considered to be in bad taste. The main purpose of a signature is to help people locate you, not to tell your life story. Every signature should include at least your return address relative to a major, known site on the network and a proper domain-format address. Your system administrator can give this to you. Some news posters attempt to enforce a 4 line limit on signature files -- an amount that should be more than sufficient to provide a return address and attribution. Limit Line Length and Avoid Control Characters Try to keep your text in a generic format. Many (if not most) of the people reading Usenet do so from 80 column terminals or from workstations with 80 column terminal windows. Try to keep your lines of text to less than 80 characters for optimal readability. If people quote part of your article in a followup, short lines will probably show up better, too. Also realize that there are many, many different forms of terminals in use. If you enter special control characters in your message, it may result in your message being unreadable on some terminal types; a character sequence that causes reverse video on your screen may result in a keyboard lock and graphics mode on someone else's terminal. You should also try to avoid the use of tabs, too, since they may also be interpreted differently on terminals other than your own. Summary of Things to Remember Never forget that the person on the other side is human Don't blame system admins for their users' behavior Be careful what you say about others Be brief Your postings reflect upon you; be proud of them Use descriptive titles Think about your audience Be careful with humor and sarcasm Only post a message once Please rotate material with questionable content Summarize what you are following up Use mail, don't post a follow-up Read all follow-ups and don't repeat what has already been said Double-check follow-up newsgroups and distributions. Be careful about copyrights and licenses Cite appropriate references When summarizing, summarize Mark or rotate answers or spoilers Spelling flames considered harmful Don't overdo signatures Limit line length and avoid control characters (*)UNIX is a registered trademark of UNIX Systems Laboratories. ----------- This document is in the public domain and may be reproduced or excerpted by anyone wishing to do so. -- Gene Spafford Software Engineering Research Center & Dept. of Computer Sciences Purdue University, W. Lafayette IN 47907-1398 Internet: spaf@cs.purdue.edu phone: (317) 494-7825