13. Tape drives
Contents of this section
13.1 Supported
- SCSI tape drives
(From the SCSI HOWTO) Drives using both fixed and variable length blocks smaller than the driver buffer length (set to 32k in the distribution sources) are supported. Virtually all drives should work. (Send mail if you know of any incompatible drives.)
- QIC-02 drives
13.2 Others
- QIC-117, QIC-40/80, QIC-3010/3020 (QIC-WIDE) drives
Most tape drives using the floppy controller should work. Various dedicated controllers (Colorado FC-10/FC-20, Mountain Mach-2, Iomega Tape Controller II) are also supported
ftp://sunsite.unc.edu/pub/Linux/kernel/tapes
13.3 Unsupported
- Emerald and Tecmar QIC-02 tape controller cards - Chris Ulrich <
insom@math.ucr.edu
>
- Drives that connect to the parallel port (eg: Colorado Trakker)
- Some high speed tape controllers (Colorado TC-15)
- Irwin AX250L/Accutrak 250 (not QIC-80)
- IBM Internal Tape Backup Unit (not QIC-80)
- COREtape Light
Next Chapter,
Previous Chapter
Table of contents of this chapter,
General table of contents
Top of the document,
Beginning of this Chapter