LESS
Section: User Commands (1)
Index
Return to Main Contents
NAME
less - opposite of more
SYNOPSIS
less -?
less -V
less [-[+]aBcCdeEfHimMnNqQrsSuUw]
[-b bufs] [-h lines] [-j line] [-k keyfile]
[-{oO} logfile] [-p pattern] [-P prompt] [-t tag]
[-T tagfile] [-x tab] [-y lines] [-[z] lines]
[+[+]cmd] [filename]...
DESCRIPTION
Less
is a program similar to
more
(1), but which allows backward movement
in the file as well as forward movement.
Also,
less
does not have to read the entire input file before starting,
so with large input files it starts up faster than text editors like
vi
(1).
Less
uses termcap (or terminfo on some systems),
so it can run on a variety of terminals.
There is even limited support for hardcopy terminals.
(On a hardcopy terminal, lines which should be printed at the top
of the screen are prefixed with a caret.)
Commands are based on both
more
and
vi.
Commands may be preceded by a decimal number,
called N in the descriptions below.
The number is used by some commands, as indicated.
COMMANDS
In the following descriptions, ^X means control-X.
ESC stands for the ESCAPE key; for example ESC-v means the
two character sequence "ESCAPE", then "v".
- h or H
-
Help: display a summary of these commands.
If you forget all the other commands, remember this one.
- SPACE or ^V or f or ^F
-
Scroll forward N lines, default one window (see option -z below).
If N is more than the screen size, only the final screenful is displayed.
Warning: some systems use ^V as a special literalization character.
- z
-
Like SPACE, but if N is specified, it becomes the new window size.
- RETURN or ^N or e or ^E or j or ^J
-
Scroll forward N lines, default 1.
The entire N lines are displayed, even if N is more than the screen size.
- d or ^D
-
Scroll forward N lines, default one half of the screen size.
If N is specified, it becomes the new default for
subsequent d and u commands.
- b or ^B or ESC-v
-
Scroll backward N lines, default one window (see option -z below).
If N is more than the screen size, only the final screenful is displayed.
- w
-
Like ESC-v, but if N is specified, it becomes the new window size.
- y or ^Y or ^P or k or ^K
-
Scroll backward N lines, default 1.
The entire N lines are displayed, even if N is more than the screen size.
Warning: some systems use ^Y as a special job control character.
- u or ^U
-
Scroll backward N lines, default one half of the screen size.
If N is specified, it becomes the new default for
subsequent d and u commands.
- r or ^R or ^L
-
Repaint the screen.
- R
-
Repaint the screen, discarding any buffered input.
Useful if the file is changing while it is being viewed.
- F
-
Scroll forward, and keep trying to read when the
end of file is reached.
Normally this command would be used when already at the end of the file.
It is a way to monitor the tail of a file which is growing
while it is being viewed.
(The behavior is similar to the "tail -f" command.)
- g or < or ESC-<
-
Go to line N in the file, default 1 (beginning of file).
(Warning: this may be slow if N is large.)
- G or > or ESC->
-
Go to line N in the file, default the end of the file.
(Warning: this may be slow if N is large,
or if N is not specified and
standard input, rather than a file, is being read.)
- p or %
-
Go to a position N percent into the file.
N should be between 0 and 100.
(This works if standard input is being read, but only if
less
has already read to the end of the file.
It is always fast, but not always useful.)
- {
-
If a left curly bracket appears in the top line displayed
on the screen,
the { command will go to the matching right curly bracket.
The matching right curly bracket is positioned on the bottom
line of the screen.
If there is more than one left curly bracket on the top line,
a number N may be used to specify the N-th bracket on the line.
- }
-
If a right curly bracket appears in the bottom line displayed
on the screen,
the } command will go to the matching left curly bracket.
The matching left curly bracket is positioned on the top
line of the screen.
If there is more than one right curly bracket on the top line,
a number N may be used to specify the N-th bracket on the line.
- (
-
Like {, but applies to parentheses rather than curly brackets.
- )
-
Like }, but applies to parentheses rather than curly brackets.
- [
-
Like {, but applies to square brackets rather than curly brackets.
- ]
-
Like }, but applies to square brackets rather than curly brackets.
- ESC-^F
-
Followed by two characters,
acts like {, but uses the two characters as open and close brackets,
respectively.
For example, "ESC ^F < >" could be used to
go forward to the > which matches the < in the top displayed line.
- ESC-^B
-
Followed by two characters,
acts like }, but uses the two characters as open and close brackets,
respectively.
For example, "ESC ^B < >" could be used to
go backward to the < which matches the > in the bottom displayed line.
- m
-
Followed by any lowercase letter,
marks the current position with that letter.
- '
-
(Single quote.)
Followed by any lowercase letter, returns to the position which
was previously marked with that letter.
Followed by another single quote, returns to the position at
which the last "large" movement command was executed.
Followed by a ^ or $, jumps to the beginning or end of the
file respectively.
Marks are preserved when a new file is examined,
so the ' command can be used to switch between input files.
- ^X^X
-
Same as single quote.
- /pattern
-
Search forward in the file for the N-th line containing the pattern.
N defaults to 1.
The pattern is a regular expression, as recognized by
ed.
The search starts at the second line displayed
(but see the -a and -j options, which change this).
Certain characters are special
if entered at the beginning of the pattern;
they modify the type of search rather than become part of the pattern:
-
- !
-
Search for lines which do NOT match the pattern.
- *
-
Search multiple files.
That is, if the search reaches the end of the current file
without finding a match,
the search continues in the next file in the command line list.
- @
-
Begin the search at the first line of the first file
in the command line list,
regardless of what is currently displayed on the screen
or the settings of the -a or -j options.
- ?pattern
-
Search backward in the file for the N-th line containing the pattern.
The search starts at the line immediately before the top line displayed.
Certain characters are special as in the / command:
-
- !
-
Search for lines which do NOT match the pattern.
- *
-
Search multiple files.
That is, if the search reaches the beginning of the current file
without finding a match,
the search continues in the previous file in the command line list.
- @
-
Begin the search at the last line of the last file
in the command line list,
regardless of what is currently displayed on the screen
or the settings of the -a or -j options.
- ESC-/pattern
-
Same as "/*".
- ESC-?pattern
-
Same as "?*".
- n
-
Repeat previous search, for N-th line containing the last pattern.
If the previous search was modified by !, the search is made for the
N-th line NOT containing the pattern.
If the previous search was modified by *, the search continues
in the next (or previous) file if not satisfied in the current file.
There is no effect if the previous search was modified by @.
- N
-
Repeat previous search, but in the reverse direction.
- ESC-n
-
Repeat previous search, but crossing file boundaries.
The effect is as if the previous search were modified by *.
- ESC-N
-
Repeat previous search, but in the reverse direction
and crossing file boundaries.
- ESC-u
-
Undo search highlighting.
Turn off highlighting of strings matching the current search pattern.
If highlighting is already off because of a previous ESC-u command,
turn highlighting back on.
Any search command will also turn highlighting back on.
(Highlighting can also be disabled by toggling the -F flag;
in that case search commands do not turn highlighting back on.)
- :e [filename]
-
Examine a new file.
If the filename is missing, the "current" file (see the :n and :p commands
below) from the list of files in the command line is re-examined.
A percent sign (%) in the filename is replaced by the name of the
current file.
A pound sign (#) is replaced by the name of the previously examined file.
The filename is inserted into the command line list of files
so that it can be seen by subsequent :n and :p commands.
If the filename consists of several files, they are all inserted into
the list of files and the first one is examined.
- ^X^V or E
-
Same as :e.
Warning: some systems use ^V as a special literalization character.
- :n
-
Examine the next file (from the list of files given in the command line).
If a number N is specified, the N-th next file is examined.
- :p
-
Examine the previous file in the command line list.
If a number N is specified, the N-th previous file is examined.
- :x
-
Examine the first file in the command line list.
If a number N is specified, the N-th file in the list is examined.
- = or ^G or :f
-
Prints some information about the file being viewed,
including its name
and the line number and byte offset of the bottom line being displayed.
If possible, it also prints the length of the file,
the number of lines in the file
and the percent of the file above the last displayed line.
- -
-
Followed by one of the command line option letters (see below),
this will change the setting of that option
and print a message describing the new setting.
If the option letter has a numeric value (such as -b or -h),
or a string value (such as -P or -t),
a new value may be entered after the option letter.
If no new value is entered, a message describing
the current setting is printed and nothing is changed.
- -+
-
Followed by one of the command line option letters (see below),
this will reset the option to its default setting
and print a message describing the new setting.
(The "-+X" command does the same thing
as "-+X" on the command line.)
This does not work for string-valued options.
- --
-
Followed by one of the command line option letters (see below),
this will reset the option to the "opposite" of its default setting
and print a message describing the new setting.
(The "--X" command does the same thing
as "-X" on the command line.)
This does not work for numeric or string-valued options.
- _
-
(Underscore.)
Followed by one of the command line option letters (see below),
this will print a message describing the current setting of that option.
The setting of the option is not changed.
- +cmd
-
Causes the specified cmd to be executed each time a new file is examined.
For example, +G causes
less
to initially display each file starting at the end
rather than the beginning.
- V
-
Prints the version number of
less
being run.
- q or :q or :Q or ZZ
-
Exits
less.
The following
three
commands may or may not be valid, depending on your particular installation.
- v
-
Invokes an editor to edit the current file being viewed.
The editor is taken from the environment variable EDITOR,
or defaults to "vi".
See also the discussion of LESSEDIT under the section on PROMPTS below.
- ! shell-command
-
Invokes a shell to run the shell-command given.
A percent sign (%) in the command is replaced by the name of the
current file.
A pound sign (#) is replaced by the name of the previously examined file.
"!!" repeats the last shell command.
"!" with no shell command simply invokes a shell.
In all cases, the shell is taken from the environment variable SHELL,
or defaults to "sh".
- | <m> shell-command
-
<m> represents any mark letter.
Pipes a section of the input file to the given shell command.
The section of the file to be piped is between the first line on
the current screen and the position marked by the letter.
<m> may also be ^ or $ to indicate beginning or end of file respectively.
If <m> is . or newline, the current screen is piped.
OPTIONS
Command line options are described below.
Most options may be changed while
less
is running, via the "-" command.
Options are also taken from the environment variable "LESS".
For example,
to avoid typing "less -options ..." each time
less
is invoked, you might tell
csh:
setenv LESS "-options"
or if you use
sh:
LESS="-options"; export LESS
The environment variable is parsed before the command line,
so command line options override the LESS environment variable.
If an option appears in the LESS variable, it can be reset
to its default on the command line by beginning the command
line option with "-+".
A dollar sign ($) may be used to signal the end of an option string.
This is important only for options like -P which take a
following string.
- -?
-
This option displays a summary of the commands accepted by
less
(the same as the h command).
If this option is given, all other options are ignored, and
less
exits after the help screen is viewed.
(Depending on how your shell interprets the question mark,
it may be necessary to quote the question mark, thus: "-\?".)
- -a
-
Causes searches to start after the last line
displayed on the screen,
thus skipping all lines displayed on the screen.
By default, searches start at the second line on the screen
(or after the last found line; see the -j option).
- -bn
-
Causes
less
to use a non-standard number of buffers.
Buffers are 1K, and by default 10 buffers are used
(except if data in coming from standard input; see the -B option).
The number n specifies a different number of buffers to use.
- -B
-
Disables automatic allocation of buffers,
so that only the default number of buffers are used.
If more data is read than will fit in the buffers, the oldest
data is discarded.
By default, when data is coming from standard input,
buffers are allocated automatically as needed
to avoid loss of data.
- -c
-
Causes full screen repaints to be painted from the top line down.
By default,
full screen repaints are done by scrolling from the bottom of the screen.
- -C
-
The -C option is like -c, but the screen is cleared before it is repainted.
- -d
-
The -d option suppresses the error message
normally displayed if the terminal is dumb;
that is, lacks some important capability,
such as the ability to clear the screen or scroll backward.
The -d option does not otherwise change the behavior of
less
on a dumb terminal).
- -Dxcolor
-
[MS-DOS only]
Sets the color of the text displayed.
x is a single character which selects the type of text whose color is
being set: n=normal, s=standout, d=bold, u=underlined, k=blink.
color is a pair of numbers separated by a period.
The first number selects the foreground color and the second selects
the background color of the text.
A single number N is the same as N.0.
- -e
-
Causes
less
to automatically exit
the second time it reaches end-of-file.
By default, the only way to exit
less
is via the "q" command.
- -E
-
Causes
less
to automatically exit the first time it reaches end-of-file.
- -f
-
Forces non-regular files to be opened.
(A non-regular file is a directory or a device special file.)
Also suppresses the warning message when a binary file is opened.
By default,
less
will refuse to open non-regular files.
- -F
-
Normally,
less
will highlight all strings which match the current
search pattern, by displaying them in standout mode.
The -F flag suppresses this highlighting.
- -hn
-
Specifies a maximum number of lines to scroll backward.
If it is necessary to scroll backward more than n lines,
the screen is repainted in a forward direction instead.
(If the terminal does not have the ability to scroll
backward, -h0 is implied.)
- -i
-
Causes searches to ignore case; that is,
uppercase and lowercase are considered identical.
This option is ignored if any uppercase letters
appear in the search pattern.
- -jn
-
Specifies a line on the screen where "target" lines
are to be positioned.
Target lines are the object of text searches,
tag searches, jumps to a line number,
jumps to a file percentage, and jumps to a marked position.
The screen line is specified by a number: the top line on the screen
is 1, the next is 2, and so on.
The number may be negative to specify a line relative to the bottom
of the screen: the bottom line on the screen is -1, the second
to the bottom is -2, and so on.
If the -j option is used, searches begin at the line immediately
after the target line.
For example, if "-j4" is used, the target line is the
fourth line on the screen, so searches begin at the fifth line
on the screen.
- -kfilename
-
Causes
less
to open and interpret the named file as a
lesskey
(1) file.
Multiple -k options may be specified.
If a file called .less exists in the user's home directory, this
file is also used as a
lesskey
file.
- -m
-
Causes
less
to prompt verbosely (like more),
with the percent into the file.
By default,
less
prompts with a colon.
- -M
-
Causes
less
to prompt even more verbosely than
more.
- -n
-
Suppresses line numbers.
The default (to use line numbers) may cause
less
to run more slowly in some cases, especially with a very large input file.
Suppressing line numbers with the -n flag will avoid this problem.
Using line numbers means: the line number will be displayed in the verbose
prompt and in the = command,
and the v command will pass the current line number to the editor
(see also the discussion of LESSEDIT in PROMPTS below).
- -N
-
Causes a line number to be displayed at the beginning of
each line in the display.
- -ofilename
-
Causes
less
to copy its input to the named file as it is being viewed.
This applies only when the input file is a pipe,
not an ordinary file.
If the file already exists,
less
will ask for confirmation before overwriting it.
- -Ofilename
-
The -O option is like -o, but it will overwrite an existing
file without asking for confirmation.
If no log file has been specified,
the -o and -O options can be used from within
less
to specify a log file.
Without a file name, they will simply report the name of the log file.
The "s" command is equivalent to specifying -o from within
less.
- -ppattern
-
The -p option on the command line is equivalent to
specifying +/pattern;
that is, it tells
less
to start at the first occurence of pattern in the file.
- -Pprompt
-
Provides a way to tailor the three prompt
styles to your own preference.
This option would normally be put in the LESS environment
variable, rather than being typed in with each
less
command.
Such an option must either be the last option in the LESS variable,
or be terminated by a dollar sign.
-P followed by a string changes the default (short) prompt to that string.
-Pm changes the medium (-m) prompt to the string, and
-PM changes the long (-M) prompt.
Also, -P= changes the message printed by the = command to the given string.
All prompt strings consist of a sequence of
letters and special escape sequences.
See the section on PROMPTS for more details.
- -q
-
Causes moderately "quiet" operation:
the terminal bell is not rung
if an attempt is made to scroll past the end of the file
or before the beginning of the file.
If the terminal has a "visual bell", it is used instead.
The bell will be rung on certain other errors,
such as typing an invalid character.
The default is to ring the terminal bell in all such cases.
- -Q
-
Causes totally "quiet" operation:
the terminal bell is never rung.
- -r
-
Causes "raw" control characters to be displayed.
The default is to display control characters using the caret notation;
for example, a control-A (octal 001) is displayed as "^A".
Warning: when the -r flag is used,
less
cannot keep track of the actual appearance of the screen
(since this depends on how the screen responds to
each type of control character).
Thus, various display problems may result,
such as long lines being split in the wrong place.
- -s
-
Causes consecutive blank lines to be squeezed into a single blank line.
This is useful when viewing
nroff
output.
- -S
-
Causes lines longer than the screen width to be
chopped rather than folded.
That is, the remainder of a long line is simply discarded.
The default is to fold long lines; that is, display the remainder
on the next line.
- -ttag
-
The -t option, followed immediately by a TAG,
will edit the file containing that tag.
For this to work, there must be a file called "tags" in the
current directory, which was previously built by the
ctags
(1) command.
This option may also be specified from within
less
(using the - command) as a way of examining a new file.
The command ":t" is equivalent to specifying -t from within
less.
- -Ttagsfile
-
Specifies a tags file to be used instead of "tags".
- -u
-
Causes backspaces and carriage returns to be treated as printable characters;
that is, they are sent to the terminal when they appear in the input.
- -U
-
Causes backspaces and carriage returns to be treated as control characters;
that is, they are handled as specified by the -r option.
By default, if neither -u nor -U is given,
backspaces which appear adjacent to an underscore character
are treated specially:
the underlined text is displayed
using the terminal's hardware underlining capability.
Also, backspaces which appear between two identical characters
are treated specially:
the overstruck text is printed
using the terminal's hardware boldface capability.
Other backspaces are deleted, along with the preceding character.
Carriage returns immediately followed by a newline are deleted.
Other carriage returns are handled as specified by the -r option.
Text which is overstruck or underlined can be searched for.
- -V
-
Displays the version number of
less.
- -w
-
Causes blank lines to be used to represent lines
past the end of the file.
By default,
a tilde character is used.
- -xn
-
Sets tab stops every n positions.
The default for n is 8.
- -X
-
Disables sending the termcap initialization and deinitialization strings
to the terminal.
This is sometimes desirable if the deinitialization string does
something unnecessary, like clearing the screen.
- -yn
-
Specifies a maximum number of lines to scroll forward.
If it is necessary to scroll forward more than n lines,
the screen is repainted instead.
The -c or -C option may be used to repaint from the top of
the screen if desired.
By default, any forward movement causes scrolling.
- -[z]n
-
Changes the default scrolling window size to n lines.
The default is one screenful.
The z and w commands can also be used to change the window size.
The "z" may be omitted for compatibility with
more.
If the number
n
is negative, it indicates
n
lines less than the current screen size.
For example, if the screen is 24 lines, -z-4 sets the
scrolling window to 20 lines. If the screen is resized to 40 lines,
the scrolling window automatically changes to 36 lines.
- +
-
If a command line option begins with +,
the remainder of that option is taken to be an initial command to
less.
For example, +G tells
less
to start at the end of the file rather than the beginning,
and +/xyz tells it to start at the first occurrence of "xyz" in the file.
As a special case, +<number> acts like +<number>g;
that is, it starts the display at the specified line number
(however, see the caveat under the "g" command above).
If the option starts with ++, the initial command applies to
every file being viewed, not just the first one.
The + command described previously
may also be used to set (or change) an initial command for every file.
LINE EDITING
When entering command line at the bottom of the screen
(for example, a filename for the :e command,
or the pattern for a search command),
certain keys can be used to manipulate the command line.
Most commands have an alternate form in [ brackets ] which can be used if
a key does not exist on a particular keyboard.
(The bracketed forms do not work in the MS-DOS version.)
Any of these special keys may be entered literally by preceding
it with the "literal" character, either ^V or ^A.
A backslash itself may also be entered literally by entering two backslashes.
- LEFTARROW [ ESC-h ]
-
Move the cursor one space to the left.
- RIGHTARROW [ ESC-l ]
-
Move the cursor one space to the right.
- ^LEFTARROW [ ESC-b or ESC-LEFTARROW ]
-
(That is, CONTROL and LEFTARROW simultaneously.)
Move the cursor one word to the left.
- ^RIGHTARROW [ ESC-w or ESC-RIGHTARROW ]
-
(That is, CONTROL and RIGHTARROW simultaneously.)
Move the cursor one word to the right.
- HOME [ ESC-0 ]
-
Move the cursor to the beginning of the line.
- END [ ESC-$ ]
-
Move the cursor to the end of the line.
- BACKSPACE
-
Delete the char to the left of the cursor,
or cancel the command if the command line is empty.
- DELETE or [ ESC-x ]
-
Delete the char under the cursor.
- ^BACKSPACE [ ESC-BACKSPACE ]
-
(That is, CONTROL and BACKSPACE simultaneously.)
Delete the word to the left of the cursor.
- ^DELETE [ ESC-X or ESC-DELETE ]
-
(That is, CONTROL and DELETE simultaneously.)
Delete the word under the cursor.
- UPARROW [ ESC-k ]
-
Retrieve the previous command line.
- DOWNARROW [ ESC-j ]
-
Retrieve the next command line.
- TAB
-
Complete the partial filename to the left of the cursor.
If it matches more than one filename, the first match
is entered into the command line.
Repeated TABs will cycle thru the other matching filesnames.
- BACKTAB [ ESC-TAB ]
-
Like, TAB, but cycles in the reverse direction thru the matching filenames.
- ^L
-
Complete the partial filename to the left of the cursor.
If it matches more than one filename, all matches are entered into
the command line (if they fit).
- ^U (Unix) or ESC (MS-DOS)
-
Delete the entire command line,
or cancel the command if the command line is empty.
If you have changed your line-kill character in Unix to something
other than ^U, that character is used instead of ^U.
KEY BINDINGS
You may define your own
less
commands by using the program
lesskey
(1)
to create a file called ".less" in your home directory.
This file specifies a set of command keys and an action
associated with each key.
You may also use
lesskey
to change the line-editing keys (see LINE EDITING).
See the
lesskey
manual page for more details.
INPUT PREPROCESSOR
You may define an "input preprocessor" for
less.
Before
less
opens a file, it first gives your input preprocessor a chance to modify the
way the contents of the file are displayed.
An input preprocessor is simply an executable program (or shell script),
which writes the contents of the file to a different file,
called the replacement file.
The contents of the replacement file are then displayed
in place of the contents of the original file.
However, it will appear to the user as if the original file is opened;
that is,
less
will display the original filename as the name of the current file.
An input preprocessor receives one command line argument, the original filename,
as entered by the user.
It should create the replacement file, and when finished,
print the name of the replacement file to its standard output.
If the input preprocessor does not output a replacement filename,
less
uses the original file, as normal.
To set up an input preprocessor, set the LESSOPEN environment variable
to a command line which will invoke your input preprocessor.
This command line should include one occurence of the string "%s",
which will be replaced by the filename
when the input preprocessor command is invoked.
When
less
closes a file opened in such a way, it will call another program,
called the input postprocessor,
which may perform any desired clean-up action (such as deleting the
replacement file created by LESSOPEN).
This program receives two command line arguments, the original filename
as entered by the user, and the name of the replacement file.
To set up an input postprocessor, set the LESSCLOSE environment variable
to a command line which will invoke your input postprocessor.
It may include two occurences of the string "%s";
the first is replaced with the original name of the file and
the second with the name of the replacement file,
which was output by LESSOPEN.
For example, on many Unix systems, these two scripts will allow you
to keep files in compressed format, but still let
less
view them directly (by giving
less
the name of the file without the .Z suffix):
lessopen.sh:
#! /bin/sh
if [ -f "$1.Z" ]; then
uncompress -c $1.Z >$1.tmp
echo $1.tmp
fi
lessclose.sh:
#! /bin/sh
rm $2
To use these scripts, put them both where they can be executed and
set LESSOPEN="lessopen.sh %s", and
LESSCLOSE="lessclose.sh %s %s".
More complex LESSOPEN and LESSCLOSE scripts may be written
to also accept the filename either with or without the .Z suffix,
or to accept other types of compressed files, and so on.
NATIONAL CHARACTER SETS
There are three types of characters in the input file:
- normal characters
-
can be displayed directly to the screen.
- control characters
-
should not be displayed directly, but are expected to be found
in ordinary text files (such as backspace and tab).
- binary characters
-
should not be displayed directly and are not expected to be found
in text files.
A "character set" is simply a description of which characters are to
be considered normal, control, and binary.
The LESSCHARSET environment variable may be used to select a character set.
Possible values for LESSCHARSET are:
- ascii
-
The default character set.
BS, TAB, NL, CR, and formfeed are control characters,
all chars with values between 127 and 255 are binary,
and all others are normal.
- latin1
-
Selects the ISO 8859/1 character set.
latin-1 is the same as ASCII, except characters between 161 and 255 are
treated as normal characters.
- dos
-
Selects a character set appropriate for MS-DOS.
In special cases, it may be desired to tailor
less
to use a character set other than the ones definable by LESSCHARSET.
In this case, the environment variable LESSCHARDEF can be used
to define a character set.
It should be set to a string where each character in the string represents
one character in the character set.
The character "." is used for a normal character, "c" for control,
and "b" for binary.
A decimal number may be used for repetition.
For example, "bccc4b." would mean character 0 is binary,
1, 2 and 3 are control, 4, 5, 6 and 7 are binary, and 8 is normal.
All characters after the last are taken to be the same as the last,
so characters 9 through 255 would be normal.
(This is an example, and does not necessarily
represent any real character set.)
Setting LESSCHARDEF to "8bcccbcc18b95.b" is the same as setting
LESSCHARSET to "ascii".
Setting LESSCHARDEF to "8bcccbcc18b95.33b." is the same as setting
LESSCHARSET to "latin1".
If neither LESSCHARSET nor LESSCHARDEF is set,
but your system supports the
setlocale
interface,
less
will use setlocale to determine the character set.
setlocale is controlled by setting the LANG or LC_CTYPE environment variables.
Control and binary characters are displayed in standout (reverse video).
Each such character is displayed in caret notation if possible
(e.g. ^A for control-A). Caret notation is used only if
inverting the 0100 bit results in a normal printable character.
Otherwise, the character is displayed as a hex number in angle brackets.
This format can be changed by
setting the LESSBINFMT environment variable.
LESSBINFMT may begin with a "*" and one character to select
the display attribute:
"*k" is blinking, "*d" is bold, "*u" is underlined, "*s" is standout.
If LESSBINFMT does not begin with a "*", normal attribute is assumed.
The remainder of LESSBINFMT is a string which may include one
printf-style escape sequence (a % followed by x, X, o, d, etc.).
For example, if LESSBINFMT is "*u[%x]", binary characters
are displayed in underlined hexadecimal surrounded by brackets.
The default if no LESSBINFMT is specified is "*d<%X>".
PROMPTS
The -P option allows you to tailor the prompt to your preference.
The string given to the -P option replaces the specified prompt string.
Certain characters in the string are interpreted specially.
The prompt mechanism is rather complicated to provide flexibility,
but the ordinary user need not understand the details of constructing
personalized prompt strings.
A percent sign followed by a single character is expanded
according to what the following character is:
- %bX
-
Replaced by the byte offset into the current input file.
The b is followed by a single character (shown as X above)
which specifies the line whose byte offset is to be used.
If the character is a "t", the byte offset of the top line in the
display is used,
an "m" means use the middle line,
a "b" means use the bottom line,
a "B" means use the line just after the bottom line,
and a "j" means use the "target" line, as specified by the -j option.
- %B
-
Replaced by the size of the current input file.
- %E
-
Replaced by the name of the editor (from the EDITOR environment variable).
See the discussion of the LESSEDIT feature below.
- %f
-
Replaced by the name of the current input file.
- %i
-
Replaced by the index of the current file in the list of
input files.
- %lX
-
Replaced by the line number of a line in the input file.
The line to be used is determined by the X, as with the %b option.
- %L
-
Replaced by the line number of the last line in the input file.
- %m
-
Replaced by the total number of input files.
- %pX
-
Replaced by the percent into the current input file.
The line used is determined by the X as with the %b option.
- %s
-
Same as %B.
- %t
-
Causes any trailing spaces to be removed.
Usually used at the end of the string, but may appear anywhere.
- %x
-
Replaced by the name of the next input file in the list.
If any item is unknown (for example, the file size if input
is a pipe), a question mark is printed instead.
The format of the prompt string can be changed
depending on certain conditions.
A question mark followed by a single character acts like an "IF":
depending on the following character, a condition is evaluated.
If the condition is true, any characters following the question mark
and condition character, up to a period, are included in the prompt.
If the condition is false, such characters are not included.
A colon appearing between the question mark and the
period can be used to establish an "ELSE": any characters between
the colon and the period are included in the string if and only if
the IF condition is false.
Condition characters (which follow a question mark) may be:
- ?a
-
True if any characters have been included in the prompt so far.
- ?bX
-
True if the byte offset of the specified line is known.
- ?B
-
True if the size of current input file is known.
- ?e
-
True if at end-of-file.
- ?f
-
True if there is an input filename
(that is, if input is not a pipe).
- ?lX
-
True if the line number of the specified line is known.
- ?L
-
True if the line number of the last line in the file is known.
- ?m
-
True if there is more than one input file.
- ?n
-
True if this is the first prompt in a new input file.
- ?pX
-
True if the percent into the current input file
of the specified line is known.
- ?s
-
Same as "?B".
- ?x
-
True if there is a next input file
(that is, if the current input file is not the last one).
Any characters other than the special ones
(question mark, colon, period, percent, and backslash)
become literally part of the prompt.
Any of the special characters may be included in the prompt literally
by preceding it with a backslash.
Some examples:
?f%f:Standard input.
This prompt prints the filename, if known;
otherwise the string "Standard input".
?f%f .?ltLine %lt:?pt%pt\%:?btByte %bt:-...
This prompt would print the filename, if known.
The filename is followed by the line number, if known,
otherwise the percent if known, otherwise the byte offset if known.
Otherwise, a dash is printed.
Notice how each question mark has a matching period,
and how the % after the %pt
is included literally by escaping it with a backslash.
?n?f%f .?m(file %i of %m) ..?e(END) ?x- Next\: %x..%t
This prints the filename if this is the first prompt in a file,
followed by the "file N of N" message if there is more
than one input file.
Then, if we are at end-of-file, the string "(END)" is printed
followed by the name of the next file, if there is one.
Finally, any trailing spaces are truncated.
This is the default prompt.
For reference, here are the defaults for
the other two prompts (-m and -M respectively).
Each is broken into two lines here for readability only.
?n?f%f .?m(file %i of %m) ..?e(END) ?x- Next\: %x.:
?pB%pB\%:byte %bB?s/%s...%t
?f%f .?n?m(file %i of %m) ..?ltline %lt?L/%L. :byte %bB?s/%s. .
?e(END) ?x- Next\: %x.:?pB%pB\%..%t
And here is the default message produced by the = command:
?f%f .?m(file %i of %m) .?ltline %lt?L/%L. .
byte %bB?s/%s. ?e(END) :?pB%pB\%..%t
The prompt expansion features are also used for another purpose:
if an environment variable LESSEDIT is defined, it is used
as the command to be executed when the v command is invoked.
The LESSEDIT string is expanded in the same way as the prompt strings.
The default value for LESSEDIT is:
%E ?lm+%lm. %f
Note that this expands to the editor name, followed by a + and the
line number, followed by the file name.
If your editor does not accept the "+linenumber" syntax, or has other
differences in invocation syntax, the LESSEDIT variable can be
changed to modify this default.
ENVIRONMENT VARIABLES
- COLUMNS
-
Sets the number of columns on the screen.
Takes precedence over the number of columns specified by the TERM variable.
(But if you have a windowing system which supports TIOCGWINSZ or WIOCGETD,
the window system's idea of the screen size takes precedence over the
LINES and COLUMNS environment variables.)
- EDITOR
-
The name of the editor (used for the v command).
- HOME
-
Name of the user's home directory (used to find a .less file).
- LANG
-
Language for determining the character set.
- LC_CTYPE
-
Language for determining the character set.
- LESS
-
Flags which are passed to
less
automatically.
- LESSBINFMT
-
Format for displaying non-printable, non-control characters.
- LESSCHARDEF
-
Defines a character set.
- LESSCHARSET
-
Selects a predefined character set.
- LESSCLOSE
-
Command line to invoke the (optional) input-postprocessor.
- LESSEDIT
-
Editor prototype string (used for the v command).
See discussion under PROMPTS.
- LESSHELP
-
Name of the help file.
- LESSOPEN
-
Command line to invoke the (optional) input-preprocessor.
- LINES
-
Sets the number of lines on the screen.
Takes precedence over the number of lines specified by the TERM variable.
- SHELL
-
The shell used to execute the ! command, as well as to expand filenames.
- TERM
-
The type of terminal on which
less
is being run.
SEE ALSO
lesskey(1)
WARNINGS
The = command and prompts (unless changed by -P)
report the line number of the line at the top of the screen,
but the byte and percent of the line at the bottom of the screen.
If the :e command is used to name more than one file,
and one of the named files has been viewed previously,
the new files may be entered into the list in an unexpected order.
If a line longer than the screen width is split (folded),
and a search matches text which straddles the split,
the matching text will not be highlighted.
In certain cases, patterns beginning with a ^ may not be
highlighted correctly.
Patterns which include a TAB character may not be highlighted correctly.
If a search is done using the ! operator for text NOT matching a pattern,
the strings which do match the pattern are highlighted.
In all cases, even if the highlighting is incorrect,
the text will nevertheless be found correctly by the search.
COPYRIGHT
Copyright (c) 1984,1985,1989,1994 Mark Nudelman
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- COMMANDS
-
- OPTIONS
-
- LINE EDITING
-
- KEY BINDINGS
-
- INPUT PREPROCESSOR
-
- NATIONAL CHARACTER SETS
-
- PROMPTS
-
- ENVIRONMENT VARIABLES
-
- SEE ALSO
-
- WARNINGS
-
- COPYRIGHT
-
This document was created by
man2html,
using the manual pages.
Time: 12:13:48 GMT, September 19, 2022