| COM2DOS.ZIP |
TSR that copy's chars from the RS-232 port to the keyboard
|
| COMCHK18.ZIP |
Commchk 1.8: Serial port protocol analyzer
|
| COMHEL16.ZIP |
Com Port Help.
|
| COMHELP.ZIP |
Comprehensive comm/tutor and UART tester
|
| COMHEX42.ZIP |
Serial communications display program Displays data in both HEX and ASCII
|
| COMPRT25.ZIP |
Config COM/LPT ports: Show address, IRQ & UART
|
| COMSND14.ZIP |
Send arbitrary characters to COM port from DOS
|
| COMST12.ZIP |
Comset v1.2: Modem/UART/serial port tester
|
| COMSTAT.ZIP |
Gives a complete diagnostic readout of either serial port status,
|
| COMTAP21.ZIP |
COMTAP v2.1 ASP - Software serial communications line monitor and debugger. Microsecond timestamp resolution; Passive bi-directional dual port monitoring and interactive single port control; Display macro-recording; Full log parameter control; Context-sensitive Hypertext help. Fully functional ASP approved, v2.1 Revision A, from Paladin Software, Inc.
|
| COMTRAP.ZIP |
TSR to trap unexpected COM port interrupts with asm src
|
| CTSSPU21.ZIP |
The CTS Serial Port Utilities (SPU) is a collection of Com Port setup and control utilities for anyone involved with PC support or with a serial port problem. Detect failed UARTs, more than one port at the same address, PCs which can't use Com4, shared and conflicting IRQ assignments, com ports which can't generate IRQs, & non-standard BIOS port assignments. IDs which ports have modems, and identifies the modems as internal, external, FAX-capable, and FAX class supported. IDs all UART types
(including T/Ports, ESP, HSSP & emulated UARTs), actual IRQ & address used. Updates the BIOS to match actual port settings; short form report perfect for AUTOEXEC.BAT operation. DOS 2.1+, or "DOS box" under Windows or OS/2.
|
| DCOM20.ZIP |
Captures COM port input. Requires two ports
|
| DLM140.ZIP |
Data Line Monitor: Turn PC into a datascope
|
| IOMON2.ZIP |
IO Monitor 386 control watches COM ports
|
| IOVIEW.ZIP |
Diagnostic - view of PC's I/O ports in action
|
| IP132.ZIP |
IP - PORT IDENTIFIER - VERSION 1.32 - IP will identify serial port base addresses, IRQ assignments, register status and quite a variety of other serial port info. Ports - Diagnostic - Address - IRQ
|
| KBFAKE10.ZIP |
Redirects serial input as if from keybd, w/src
|
| NCDC151.ZIP |
Fast XX/UU de/encoder for DOS/VAX/UNIX w/C src
|
| PC_TO_PC.ZIP |
Assist on PC-PC direct connection
|
| PF271.ZIP |
Port Finder: Display info/swap LPT & COM ports
|
| PORT11.ZIP |
I/O port debugging tool, with C source code
|
| PORTS13.ZIP |
Permits reading and writing to hardware ports
|
| PORTST11.ZIP |
Diagnostic program for serial/parallel ports
|
| PRINDIR9.ZIP |
COM/LPT port redir. to any other port or file
|
| PRLINK20.ZIP |
File transfer prog. via printer/parallel port
|
| PRNWAT.ZIP |
ASM source for monitoring printer output. Data sent to the printer is sent to the console display as well.
|
| RS204.ZIP |
Displays RS-232 serial port status
|
| RS232101.ZIP |
RS232 1.01, debug most of RS-232 problems
|
| SLIKMODE.ZIP |
New MODE: Set baudrate to any rate w/C src
|
| SWAPIRQ.ZIP |
CTS SwapIRQ v1.1: Redirect IRQs for DOS. SwapIRQ is a tiny DOS TSR that lets DOS software use any IRQ by redirecting the interrupts (IRQs) from your modem, sound card or any other device. SwapIRQ can be used with some games that require a specific IRQ for the sound card, and with communications software that does not support non-standard IRQs. Dos 2.1+, any display. <ASP>
|
| SYSCHK40.ZIP |
SYSCHK v2.40 <ASP> - System Info Checker. System information utility provides complete details on devices installed in your system. Clean, easy to use menus show CPU, IRQs, BIOS Bus Type, Mouse Info, Port Info, IDE and SCSI disks, CD-ROM, TSR info, Network, Video, CMOS Memory info, speed, and lots more. Print out a full configuration report on your system. NEW! Windows info, Cache, PCI, more Netware info, and more video info. Required utility!
|
| TIMIO3_0.ZIP |
Timed record and playback COM port data
|
| UARTBUG.ZIP |
UART and COM port debuging tool, TSR
|
| WEDGE20.ZIP |
Wedge - is a TSR which intercepts characters at the serial port, and redirects them to the keyboard buffer. You can use WEDGE to have serial barcode scanners send data to applications without specifically programming your app for a scanner.
|
| WHTPRT40.ZIP |
Displays system serial ports & IRQ assignments
|
| XPORT21.ZIP |
Fast PC-to-PC RS232 serial line file transfer
|
