Newsgroups: rec.radio.amateur.misc
From: keithm@wicat.com (Keith McQueen)
Subject: Mod for Kenwood TW-4000 for CAP
Message-ID: <1992Nov6.173126.8068@wicat.com>
Summary: CAP mod for Kenwood TW-4000
Keywords: mod, tw-4000
Organization: WICAT Systems
Date: Fri, 6 Nov 1992 17:31:26 GMT
Lines: 20


I tried to e-mail the gent who needed the mod for the Kenwood
TW-4000 for CAP for his friend.  I bounced with unknown host.
Since mods are fairly general interest anyway, I decided to
just post it.
------------------------------

On the back of the CPU assembly, (part of the front panel assembly),
there is a wire jumper (sort of a loop of wire between two pads on
the board).  If you clip this wire, and reset the CPU, the '4000
will RX-TX from 141.0 Mhz to 150.995 Mhz.  There is no change on
UHF.

Let me know if this helps.


-- 
 Keith McQueen, Wicat Systems Inc. , (801)224-6400      | My opinions are |
 Packet:      n7hmf @ nv7v.UT.USA.NA                    | all mine...     |
 Internet:    keithm@wicat.com                          | ...so there!    |