Copyright: Copyright © Corel Corporation Limited. 1996.   Mon Apr 15 10:41:45 1996. All Rights Reserved.
Citation: Copyright © Corel Corporation Limited. 1996. All Rights Reserved.


Click a button to open a Macros Help file.


Macro Command Center Help

Welcome to the Macro Command Center.

To view the Macros Help,

1	Click the picture representing the product whose Macros Help you want to see.

Note that to view the Macros Help, you must have previously installed the Macros Help. If you have not previously installed the Macros Help, exit the Macro Command Center and run the setup program.


WP Macros Help

The WP Macros Help (wpmh7us.hlp) may not be installed. The WP Macros Help requires approximately 1.8MB of disk space and is available only under a custom CD-ROM installation.

Click [image] to go to the Macro Command Center Homebase.

Because you may have to exit the Macro Command Center before you can install the Macros Help, right-click, then click Copy or Print Topic to use these instructions.

To install the WP Macros Help,

1	Run the WordPerfect 7 or the Corel Office 7 Setup program from the diskette or from the CD-ROM.

You may be able to run Setup from the Start menu:

Start>Corel Office 7>Accessories>WordPerfect 7 or the Corel Office 7 Setup.

2	Click Next, then Yes, then Next to get to the Installation Type dialog.

3	Click Custom as the Installation Type, then click Next.

4	If necessary, indicate the destination drive to where you wish to install.

5	Click Next to get to the Custom Installation dialog.

6	Deselect all the components.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

7	Highlight the WordPerfect 7 component, then click the Components button.

8	Deselect all the components.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

9	Highlight the WordPerfect component, then click the Components button.

10	Select the WordPerfect Macro Help component.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

11	Click OK until you get to the Custom Installation dialog, then click Next.

12	Click Install to install the WP Macros Help.


Presentations Macros Help

The Presentations Macros Help (wpprmhus.hlp) may not be installed. The Presentations Macros Help requires approximately 522KB of disk space and is available only under a custom CD-ROM installation.

Click [image] to go to the Macro Command Center Homebase.

Because you may have to exit the Macro Command Center before you can install the Macros Help, right-click, then click Copy or Print Topic to use these instructions.

To install the Presentations Macros Help,

1	Run the WordPerfect 7 or the Corel Office 7 Setup program from the diskette or from the CD-ROM.

You may be able to run Setup from the Start menu:

Start>Corel Office 7>Accessories>WordPerfect 7 or the Corel Office 7 Setup.

2	Click Next, then Yes, then Next to get to the Installation Type dialog.

3	Click Custom as the Installation Type, then click Next.

4	If necessary, indicate the destination drive to where you wish to install.

5	Click Next to get to the Custom Installation dialog.

6	Deselect all the components.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

7	Highlight the Presentations 7 component, then click the Components button.

8	Deselect all the components.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

9	Highlight the Presentations Help component, then click the Components button.

10	Select the Presentations Macro Help component.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

11	Click OK until you get to the Custom Installation dialog, then click Next.

12	Click Install to install the Presentations Macros Help.


Quattro Pro Reference Help

The Quattro Pro Reference Help (qpwref.hlp) may not be installed. The Quattro Pro Reference Help requires approximately 1.43MB of disk space and is available under a custom CD-ROM installation.

Click [image] to go to the Macro Command Center Homebase.

Because you may have to exit the Macro Command Center before you can install the Macros Help, right-click, then click Copy or Print Topic to use these instructions.

To install the Quattro Pro Reference Help,

1	Run the WordPerfect 7 or the Corel Office 7 Setup program from the diskette or from the CD-ROM.

You may be able to run Setup from the Start menu:

Start>Corel Office 7>Accessories>WordPerfect 7 or the Corel Office 7 Setup.

2	Click Next, then Yes, then Next to get to the Installation Type dialog.

3	Click Custom as the Installation Type, then click Next.

4	If necessary, indicate the destination drive to where you wish to install.

5	Click Next to get to the Custom Installation dialog.

6	Deselect all the components.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

7	Highlight the Quattro Pro 7 component, then click the Components button.

8	Select the Standard Help Files component.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

9	Click OK until you get to the Custom Installation dialog, then click Next.

10	Click Install to install the Quattro Pro Reference Help.


WP Draw Macros Help

The WP Draw Macros Help (wpdrmhus.hlp) may not be installed. The WP Draw Macros Help requires approximately 340KB of disk space and is available only under a custom CD-ROM installation. (Note that the WP Draw Macros Help file need not be installed when Presentations is installed since the macros used in WP Draw are a subset of those used in Presentations.)

Click [image] to go to the Macro Command Center Homebase.

Because you may have to exit the Macro Command Center before you can install the Macros Help, right-click, then click Copy or Print Topic to use these instructions.

To install the WP Draw Macros Help,

1	Run the WordPerfect 7 or the Corel Office 7 Setup program from the diskette or from the CD-ROM.

You may be able to run Setup from the Start menu:

Start>Corel Office 7>Accessories>WordPerfect 7 or the Corel Office 7 Setup.

2	Click Next, then Yes, then Next to get to the Installation Type dialog.

3	Click Custom as the Installation Type, then click Next.

4	If necessary, indicate the destination drive to where you wish to install.

5	Click Next to get to the Custom Installation dialog.

6	Deselect all the components.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

7	Highlight the WordPerfect 7 component, then click the Components button.

8	Deselect all the components.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

9	Highlight the WordPerfect Draw component, then click the Components button.

10	Select the WP Draw Macro Help component.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

11	Click OK until you get to the Custom Installation dialog, then click Next.

12	Click Install to install the WP Draw Help.


Programming Commands Help

The Programming Commands Help (psmh70us.hlp) may not be installed. The Programming Commands Help requires approximately 483KB of disk space and is automatically installed when any product using PerfectScript macro capability is installed (such as WordPerfect) and is also available under a custom CD-ROM installation.

Click [image] to go to the Macro Command Center Homebase.

Because you may have to exit the Macro Command Center before you can install the Macros Help, right-click, then click Copy or Print Topic to use these instructions.

To install the Programming Commands Help,

1	Run the WordPerfect 7 or the Corel Office 7 Setup program from the diskette or from the CD-ROM.

You may be able to run Setup from the Start menu:

Start>Corel Office 7>Accessories>WordPerfect 7 or the Corel Office 7 Setup.

2	Click Next, then Yes, then Next to get to the Installation Type dialog.

3	Click Custom as the Installation Type, then click Next.

4	If necessary, indicate the destination drive to where you wish to install.

5	Click Next to get to the Custom Installation dialog.

6	Deselect all the components.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

7	Highlight the Required Shared Components, then click the Components button.

8	Select the PerfectScript component.

Note that when you select the PerfectScript component, other components will be selected automatically, which you do not need to deselect.

Click Yes to any messages verifying you want to deselect a component. Use the scroll bar to make sure you have deselected all the other components.

9	Click OK until you get to the Custom Installation dialog, then click Next.

10	Click Install to install the Programming Commands Help.