%% This document created by Scientific Notebook (R) Version 3.0


\documentclass[12pt,thmsa]{article}
\usepackage{amssymb}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\usepackage{makeidx}
\usepackage{sw20jart}

%TCIDATA{TCIstyle=article/art4.lat,jart,sw20jart}

%TCIDATA{<META NAME="ViewSettings" CONTENT="31">}
%TCIDATA{<META NAME="GraphicsSave" CONTENT="32">}
%TCIDATA{<META NAME="Title" CONTENT="Frame Properties">}
%TCIDATA{Created=Mon Aug 19 14:52:24 1996}
%TCIDATA{LastRevised=Thu Feb 13 17:02:53 1997}
%TCIDATA{Language=American English}
%TCIDATA{CSTFile=MathHelp.cst}
%TCIDATA{<LINK REL="author" HREF="DM0-1.tex">}
%TCIDATA{<LINK REL="begin" HREF="DM6-1.tex">}
%TCIDATA{<LINK REL="contents" HREF="DM0-0.tex">}
%TCIDATA{<LINK REL="copyright" HREF="DM0-2.tex">}
%TCIDATA{<LINK REL="end" HREF="DM6-7.tex">}
%TCIDATA{<LINK REL="index" HREF="DMIndex.tex">}
%TCIDATA{<LINK REL="next" HREF="DM6-3.tex">}
%TCIDATA{<LINK REL="parent" HREF="DM6.tex">}
%TCIDATA{<LINK REL="previous" HREF="DM6-1.tex">}
%TCIDATA{<LINK REL="top" HREF="DM0-0.tex">}

\input{tcilatex}
\begin{document}


\section{Frame\label{Frame Properties} Properties}

Frame properties refer to the size of a graphic and to its placement within
your document.

\strut

\subsection{\ Resizing the Frame}

When the frame is selected, \label{Resize frame}eight black handles are
visible and you can resize 
\index{Frame@Frame!resize@resize}the frame by dragging one of the handles.
The corner handles leave the opposite vertex fixed while moving the two
sides adjacent to the handle, creating a frame that has edges proportional
to the original frame 
\FRAME{itbpF}{0.8769in}{0.5846in}{0.2318in}{}{}{Figure }{\special{language
"Scientific Word";type "MAPLEPLOT";width 0.8769in;height 0.5846in;depth
0.2318in;display "PICT";function \TEXUX{$x\sin x$};linecolor
"black";linestyle 1;linethickness 1;pointstyle "point";xmin "-5";xmax
"5";xviewmin "-5";xviewmax "5";yviewmin "-4.947";yviewmax "1.955";phi
45;theta 45;plottype 4;numpoints 49;axesstyle "normal";xis
\TEXUX{x};var1name \TEXUX{$x$};}} . The edge handles move only the
corresponding edge in or out. Either type of change stretches or shrinks a
plot in the view, along with the frame. Resizing the frame retains the same
domain and view intervals. For example, use one of the side handles to
create a tall and narrow\thinspace frame \FRAME{itbpF}{0.4852in}{0.8795in}{%
0.4065in}{}{}{Figure }{\special{language "Scientific Word";type
"MAPLEPLOT";width 0.4852in;height 0.8795in;depth 0.4065in;display
"PICT";function \TEXUX{$x\sin x$};linecolor "black";linestyle
1;linethickness 1;pointstyle "point";xmin "-5";xmax "5";xviewmin
"-5";xviewmax "5";yviewmin "-4.947";yviewmax "1.955";phi 45;theta
45;plottype 4;numpoints 49;axesstyle "normal";xis \TEXUX{x};var1name
\TEXUX{$x$};}}$\,$or use one of the handles on the top or bottom to create a
short and fat frame \FRAME{itbpF}{2.5581in}{0.3373in}{0.0701in}{}{}{Figure }{%
\special{language "Scientific Word";type "MAPLEPLOT";width 2.5581in;height
0.3373in;depth 0.0701in;display "PICT";function \TEXUX{$x\sin x$};linecolor
"black";linestyle 1;linethickness 1;pointstyle "point";xmin "-5";xmax
"5";xviewmin "-5";xviewmax "5";yviewmin "-4.947";yviewmax "1.955";phi
45;theta 45;plottype 4;numpoints 49;axesstyle "normal";xis
\TEXUX{x};var1name \TEXUX{$x$};}}.

The examples in the previous paragraph illustrate the use of in-line plots,
one of the two placement options described in the next section.

\strut

\subsection{\ Plot Properties\label{Plot Properties} Tabbed Dialog}

You use the \textsf{Plot Properties} tabbed dialog to specify frame
dimensions precisely, to determine how the frame is placed in your document,
and to attach a label to your plot.

\begin{quote}
$\blacktriangleright $ To verify and/or change \textsf{Frame Properties}
\end{quote}

\begin{itemize}
\begin{enumerate}
\item[1.]  Select the frame. (Eight black boxes appear.)

\item[2.]  From the \textsf{Edit} menu, choose \textsf{Properties}; or click
the dialog tool in the lower-right corner of the frame; or click the
properties tool \FRAME{itbpF}{0.3009in}{0.3009in}{0.0701in}{}{}{property.wmf%
}{\special{language "Scientific Word";type "GRAPHIC";display
"PICT";valid_file "F";width 0.3009in;height 0.3009in;depth
0.0701in;original-width 17.8125pt;original-height 16.9375pt;cropleft
"0";croptop "1";cropright "1";cropbottom "0";filename
'Property.wmf';file-properties "XNPEU";}}.\medskip
\end{enumerate}
\end{itemize}

You determine the placement of a frame on the \textsf{Plot Properties, Frame}
page by choosing \textsf{In Line }or \textsf{Displayed. }

\subsubsection{In-Line Frames\label{In-line frame}}

When a frame 
\index{Frame@Frame!in-line@in-line}is in line, you can move it up or down
within the line.

\begin{quote}
$\blacktriangleright $ To move an in-line frame up or down
\end{quote}

\begin{enumerate}
\item[1.]  Select the frame.

\item[2.]  Drag the frame up or down.\medskip
\end{enumerate}

You can drag the frame such that its lower edge is resting on the text
baseline, is centered on the line, hangs with the upper edge at the text
baseline, or rests anywhere in between. An in-line frame behaves like a word
in the text, in the sense that, when you enter additional items to the left
of it, the frame is pushed along in the line.

You can also adjust the offset in the \textsf{Plot Properties + Frame}
tabbed dialog. After choosing \textsf{In Line}, specify a value for \textsf{%
Baseline, Offset from Bottom of Frame}. A toggle in the dialog box allows
you to choose points, inches, centimeters, or picas as units of measurement.

\subsubsection{Displayed Frames 
\index{Display@Display!frame@frame}\label{Display frame}}

Displayed frames appear on the screen centered on a separate line.

\begin{quote}
$\blacktriangleright $ To display a plot or graphic
\end{quote}

\begin{itemize}
\begin{enumerate}
\item[1.]  Select the frame.

\item[2.]  From the \textsf{Edit} menu, choose \textsf{Properties}

- or - \smallskip

Click the dialog tool in the lower-right corner of the frame\smallskip

- or -

Click 
\FRAME{itbpF}{0.3009in}{0.3009in}{0.0701in}{}{}{property.wmf}{\special%
{language "Scientific Word";type "GRAPHIC";display "PICT";valid_file
"F";width 0.3009in;height 0.3009in;depth 0.0701in;original-width
17.8125pt;original-height 16.9375pt;cropleft "0";croptop "1";cropright
"1";cropbottom "0";filename 'Property.wmf';file-properties "XNPEU";}}.

\item[3.]  In the\textsf{\ Frame} page of the \textsf{Plot Properties}
dialog under \textsf{Placement}, choose \textsf{Displayed}.\medskip \bigskip
\end{enumerate}
\end{itemize}

\begin{quotation}
\emph{Important}\quad To display a frame, choose \textsf{Displayed} from the 
\textsf{Frame} page of the \textsf{Plot\ Properties} tabbed dialog, or
choose \textsf{Center Text }from the \textsf{Body Tags} popup list. Do not
insert a frame inside a mathematics display.
\end{quotation}

\strut

The use of the mathematics display, which treats the frame like mathematics,
can lead to unpredictable results when you preview or print your document.
If the frame appears red on your screen, and if it is not in a mathematics
display, you can change the frame to text mode by selecting it with the
mouse and clicking the \textsf{Math/Text} button.\medskip

\subsection{\ Related topics}

\begin{itemize}
\item  \hyperref{The Frame and the View}{}{}{DM6-1.tex#Frame}

\item  \hyperref{The View for 2D Plots}{}{}{DM6-3.tex#View intervals}

\item  \hyperref{Exercises and Solutions}{}{}{DM6-7.tex#Exercises}
\end{itemize}

\rule{0.67in}{0.01in}

\hyperref{\FRAME{itbpF}{38.875pt}{24.5pt}{6pt}{}{}{index.wmf}{\special%
{language "Scientific Word";type "GRAPHIC";maintain-aspect-ratio
TRUE;display "PICT";valid-file "F";width 38.875pt;height 24.5pt;depth
6pt;original-width 36.125pt;original-height 22.5625pt;cropleft "0";croptop
"1";cropright "1";cropbottom "0";filename 'index.wmf';file-properties
"XNPEU";}}}{}{}{DMIndex.tex#Math Index}\quad {\small Index entries: 
\hyperref{Display}{}{}{DMIndex.tex#Display}, \hyperref{Frame}{}{}{%
DMIndex.tex#Frame}, \hyperref{In-line frame}{}{}{DMIndex.tex#In-line frame}, 
\hyperref{Plotting}{}{}{DMIndex.tex#Plotting}, \hyperref{Plot properties}{}{%
}{DMIndex.tex#Plot properties}}

\end{document}
