0 fatal error 1 error 2 warning 3 note 4 msg 1000 unknown error; consult documentation for technical support options 1101 incorrect MSPDB50.DLL version; recheck installation of this product 1102 out of memory 1103 debugging information corrupt; recompile module 1104 cannot open file "%s" 1105 cannot close file "%s" 1106 invalid file or disk full: cannot seek to 0x%lx 1107 invalid or corrupt file: cannot read at 0x%lx 1108 cannot write file at 0x%lx 1109 cannot remove file "%s" 1110 cannot rename file "%s" 1111 invalid /BASE argument "%s" 1112 module machine type "%s" conflicts with target machine type "%s" 1113 invalid machine type 1115 /MACHINE option required 1117 syntax error in option "%s" 1118 syntax error in "%s" statement 1119 invalid ordinal number "%s" 1120 %d unresolved externals 1121 duplicate ordinal number "%d" 1123 failure during conversion to COFF: file invalid or corrupt 1127 library is corrupt 1129 cannot find resolution for weak extern %s 1130 Linker miscalc (base relocations off by 0x%lx) 1131 no library file specified 1132 invalid format for MS-DOS stub file "%s" 1136 invalid or corrupt file 1137 invalid argument specified with /SECTION 1140 too many modules for program database; relink with /PDB:NONE 1141 failure during build of exports file 1143 invalid or corrupt file: no symbol for comdat section 0x%x 1144 error with LINK_REPRO var; cannot open "%s" 1145 /MERGE created circular link for section "%s" 1146 no argument specified with option "/%s" 1147 invalid number specified with option "/%s" 1148 failure during conversion to COFF: cannot copy temp file "%s" 1149 output filename matches input filename "%s" 1152 cannot resolve one or more undecorated symbols 1153 /VXD command-line option required 1154 specified import library filename matches exports file "%s" 1155 special symbol "%s" already defined. 1156 .sbss section not supported 1157 fixup overflow; offset of target symbol "%s" greater than +-8MB 1158 cannot run "%s" 1159 no output file specified 1160 library with zero objects not allowed 1161 invalid export specification 1162 expected aux symbol for comdat section 0x%x 1163 invalid selection for comdat section 0x%x 1164 section 0x%x alignment (%u) greater than /ALIGN value 1165 link failed because of fixup errors 1166 cannot adjust code at offset=0x%08x, va=0x%08x 1167 invalid or corrupt file: file contains relocs but header has no machine type 1168 cannot open %s for writing 1169 one or more multiply defined symbols found 1170 line in command file contains %ld or more characters 1171 unable to load %s 1172 more than one object with the name "%s" found; rename object(s) or relink /PDB:NONE 1173 unable to find entrypoint "%s" in %s 1174 unable to /REBASE %s; not a valid Win32 image 1175 failed to /REBASE %s 1177 TOC size limit exceeded 1178 missing MODEND record; file is invalid or corrupt 1179 invalid or corrupt file: duplicate comdat "%s" 1180 insufficient disk space to complete link 1181 cannot open input file "%s" 1182 cannot have more than 64K exports 1183 invalid or corrupt file: extended relocation count %lu less than 65535 1184 invalid section name "%s" specified in option or directive "%s" 1185 invalid section name "%s" specified 1186 invalid or corrupt COFF object; reloc to undefined static symbol "%s" 1187 corrupt object - unmatched %s relocation 1188 invalid fixup target "%s"; possibly zero length section 1189 library limit of %u objects exceeded 1190 invalid fixup found, type 0x%04X 1191 jitinfo size limit exceeded 1192 "/PDB:NONE" not compatible with "MPPC" target machine 1193 no conversion performed; no imports found 1194 cannot delay-load %s due to import of data symbol %s; relink without /DELAYLOAD:%s 1195 target machine "%s" requires "%s" 1196 invalid or corrupt import object: unknown version 1197 invalid or corrupt import object: unknown type 1198 invalid or corrupt import object: unknown name type 1199 invalid or corrupt import object: non-zero reserved fields 1200 error reading program database "%s" 1201 error writing to program database "%s"; check for insufficient disk space 1202 "%s" is missing debugging information for referencing module 1203 "%s" is missing current debugging information for referencing module 1204 "%s" compiled /Yc /Yu /Z7; cannot create PDB; recompile with /Zi 1206 cannot overwrite Visual C++ 1.0 PDB "%s"; delete and rebuild 1207 incompatible PDB format in "%s"; delete and rebuild 1209 program database "%s" differs from previous link; relink or rebuild 1210 exceeded internal ILK size limit; relink with /INCREMENTAL:NO 1211 precompiled type information not found; "%s" not linked or overwritten 1212 error opening program database; file is in use 1213 unexpected import object encountered 1214 COM+ initialization failed 1215 failed to update COM+ metadata for %s 1216 failed to write COM+ metadata 1217 cannot /FORCELIB:%s due to imports; relink without /FORCELIB:%s 1218 warning treated as error; no output file generated 1219 ILK corrupt or not found; relink with full command line 1220 "%s" requires /OUT: specification 1221 a subsystem can't be inferred and must be defined 1222 cannot delay load %s due to import of data symbol %s; relink with /NODELAYLOAD:%s 1548 cannot find import information for "%s" 1549 "%s" is a Power Macintosh executable - cannot rebase 1561 entry point must be defined 1568 invalid file %s 1581 corrupted object or old compiler (bad Pcode entry point) 1594 Only /ENTRY option specified for Shared Library; /ENTRY is mapped to /MAC:INIT option, and /ENTRY is ignored 2001 unresolved external symbol %s 2003 gp relative fixup to symbol not in .sdata "%s" 2004 gp relative fixup overflow; .sdata section ("%s") is too large 2005 %s already defined in %s 2006 TOC relative fixup to symbol not in TOC "%s"; fixup ignored 2007 TOC relative fixup overflow; TOC is too large; fixup ignored 2008 Fixup target is not aligned "%s" 2009 Fixup target must be absolute "%s" w/o /FIXED; fixup ignored 2011 precompiled object not linked in; image may not run 2012 No NOP following %s relocation to "%s" 2013 Fixup overflow. Target "%s" is out of range 2014 TLS relative fixup overflow; .tls section ("%s") is too large 2015 JAL fixup opcode is not JAL 4001 no object files specified; libraries used 4002 %s defined in %s 4003 invalid library format; library ignored 4005 no objects used from library %s 4006 %s already defined in %s; second definition ignored 4010 invalid version number %s; default version assumed 4012 invalid value "%s", must be %s; option ignored 4013 image size 0x%lx exceeds specified maximum 0x%lx 4014 cannot find member object %s 4015 %s commit exceeds reserve; commit size set to %0xlx 4017 %s statement not supported for the target platform; ignored 4018 too many type indexes in PDB "%s", discarding subsequent type information 4019 corrupt string table (table end); new end assumed 4022 cannot find unique match for symbol "%s" 4023 base address %lx not a 64K multiple; assumed %lx 4027 CVPACK error 4030 invalid file offset 0x%lx for %s; category not dumped 4031 no subsystem specified; CONSOLE assumed 4033 converting object format from OMF to COFF 4037 "%s" does not exist; ignored 4038 displaying raw data in %u units per line 4039 section "%s" specified with /SECTION option does not exist 4040 corrupt string table (size); string table ignored 4041 no edit options specified 4042 object specified more than once; extras ignored 4043 invalid /%s value %li (must be power of 2); assumed default 4044 unrecognized option "%s"; ignored 4045 creating LINK_REPRO test case in dir "%s" 4046 LINK_REPRO is set to current directory; ignored 4047 cannot edit library file "%s"; ignored 4048 Invalid format file; ignored 4049 locally defined symbol "%s" imported 4051 extra delimiter in /EXPORT specification 4052 using .EXP file; ignoring .DEF file "%s" 4055 invalid fixup found, address %08lx; fixup ignored 4056 extra arguments ignored for option "/%s" 4057 "%s" should precede "%s" in the link command line 4059 %s already specified; additional resource file ignored 4060 stub file missing full MS-DOS header; rebuild stub with /KNOWEAS 16-bit LINK option 4061 /NOSTUB ignored because no DOS stub is present 4062 "%s" not compatible with "%s" target machine; option ignored 4065 "%s" cannot be ordered; ignored 4066 DLL contains .sdata section 4067 ambiguous entry point; selected "%s" 4068 /MACHINE not specified; defaulting to %s 4069 cannot checksum image; checksum set to 0 4070 /OUT:%s directive in .EXP differs from output filename "%s"; ignoring directive 4071 cannot be incrementally linked on subsequent links 4072 section count %d exceeds max (%d); image may not run 4073 cannot create map for .ILK file; linking nonincrementally 4074 unable to load %s; cannot checksum 4075 ignoring /%s due to /%s specification 4076 invalid incremental status file "%s"; linking nonincrementally 4077 exports file "%s" used; ignoring other export specifications 4078 multiple "%s" sections found with different attributes (%08lX) 4079 no write permission for incremental status file "%s"; linking nonincrementally 4081 insufficient disk space; linking nonincrementally 4082 unable to find entrypoint %s in %s; cannot checksum 4083 module "%s" does not exist; ignored 4084 total image size %d exceeds max (%d); image may not run 4085 more than %u comments; skipping exestr 4086 entrypoint "%s" is not __stdcall with 12 bytes of arguments; image may not run 4087 CONSTANT keyword is obsolete; use DATA 4088 image being generated due to /FORCE option; image may not run 4089 all references to "%s" discarded by /OPT:REF 4092 shared section "%s" contains relocations; image may not run correctly 4093 Drive/Directory component ignored in "%s" statement 4094 "%s" is an MS-DOS executable; use EXEHDR to dump it 4095 "%s" is an NE format executable; use EXEHDR to dump it 4096 /BASE value "%lx" is invalid for Windows 95; image may not run 4097 duplicate name "%s" in order file; using last one 4098 defaultlib "%s" conflicts with use of other libs; use /NODEFAULTLIB:library 4099 PDB "%s" was not found with "%s" or at "%s"; linking object as if no debug info 4100 No TOC reload for reference to "%s" 4101 exported symbol "%s" imported 4102 export of deleting destructor "%s"; image may not run correctly 4103 import of deleting destructor "%s"; image may not run correctly 4104 export of symbol "%s" should be PRIVATE 4105 no argument specified with option "/%s"; ignoring switch 4106 "%s" section discarded due to "%s" specification 4107 "/%s" not supported by this version of MSPDB50.DLL; ignored 4108 /ALIGN specified without /DRIVER or /VXD; image may not run 4110 non-import library member at 0x%lx ignored 4193 invalid machine type "%s" for library member at 0x%lx; ignored 4194 /DELAYLOAD:%s ignored 4195 unable to load %s 4196 unable to find entrypoint "%s" in %s 4197 export "%s" specified multiple times; using first specification 4198 base key "%s" not found - using default 4199 /DELAYLOAD:%s ignored; no imports found from %s 4200 corrupt line number information in object file; ignored 4202 spawning full build due to /%s directive 4543 Section "%s" with invalid attributes ignored 4544 Symbol "%s" specified with /IMPORT not referenced in application - ignored 4545 Container "%s" specified with /IMPORT not referenced in application - ignored 4546 Mismatch in versions detected. Container may not load. Use /VERBOSE for details. 4547 Setting "%s" to %d 4548 Ignoring "%s" %d 4549 shared library "%s" does not have any exports 6001 insufficient disk space; performing full link 6002 invalid .ILK file found; performing full link 6003 LINK options changed; performing full link 6004 %s not found or not built by the last incremental link; performing full link 6005 exports changed; performing full link 6006 program database %s missing; performing full link 6008 object file added; performing full link 6009 object file removed; performing full link 6010 library changed; performing full link 6011 internal limit exceeded; performing full link 6012 precompiled types found; performing full link 6013 padding exhausted: performing full link 6014 symbol reference set changed; performing full link 6015 bss (uninitialized data) change; performing full link 6016 absolute symbol changed; performing full link 6017 set of library modules referenced changed; performing full link 6018 multiple definitions found for %s; performing full link 6019 directives changed; performing full link 6020 ILK file not built by this linker; performing full link 6021 performing full link 6022 unable to load ILK file; performing full link 6023 unable to extend map for ILK file; performing full link 6024 Mac Resource File "%s" changed; performing full link 6025 unable to do comdat selection; performing full link 6026 obsolete DBI format found; performing full link 6027 performing a full relink with the following command line: "%s" 9001 Creating library %s and object %s 9002 Searching Libraries 9003 Done Searching Libraries 9004 Start Generating .exp file 9005 Command: 9006 End Generating .exp file 9007 Start Pass1 9008 End Pass1 9009 Searching %s: 9010 Found %s 9011 Referenced in %s 9012 Loaded %s 9013 Start Pass2 9014 End Pass2 9015 Processed /NODEFAULTLIB (suppressing all default libs) 9016 Processed /NODEFAULTLIB:%s 9017 Processed /DEFAULTLIB:%s 9018 Discarded %s from %s 9019 Discarded %s 9020 Discarded "%s" from %s 9021 Replacing %s 9022 Processing /ORDER options 9023 Done processing /ORDER options 9024 External code objects not listed in the /ORDER file: 9025 Processed /DISALLOWLIB:%s 9026 Selected symbol: 9027 Replaced symbol(s): 9028 ICF total savings: %ld bytes 9029 %s from %s 9030 "%s" from %s