These items are used by the afaxsend program.
- WSetup
The transmit setup string. This optional string is sent
to the modem. As in the RSetup line, the line is sent to the modem as
it appears (since 1.23). This
allows you to add commands to set such things as speaker use and
volume.
- DialType
Takes the parameters Pulse (default) or Tone.
- DialPrefix
Prefix to add before number when dialling. I use it
to get an outside line (dials 0 first), by setting it to ATDP0,DT,
which will pulse-dial 0, then tone-dial the rest of the number.
- DoPadding
This should not be necessary. However, some
FaxModems to not observe the minimum scan-time restrictions set by the
standard. When connecting to slower fax machines, this may result in
missed scan-lines. Note that if you set this parameter, it will
usually result in fax transmissions taking longer, as worst-case
padding must be added.
- WStatus
Write Status. If present, a status window will pop
up when a fax is being transmitted, showing various details such as name,
connect speed, receiver ID, percent of file sent. It takes two
optional numeric parameters, which are used for the top and left edge
pixel positions to place the window.