Manual: Dr. Schueler's Medical Adviser (UK)


Installation

1. Enter Windows 3.1  
2. Starting at Program Manager, pull down the File menu and select Run... 
   (the shorthand notation for this sequence is "Program Manager|File|Run") 
   and at the command prompt type the letter (a-z) of your disk drive 
   followed by install (example: d:install).
3. The program will default into the c:\hmapro directory and will occupy 
   about 5.5 Mb of disk.  You will have the opportunity to choose your drive 
   and/or directory name.
4. At the end of installation, an options screen will be presented to you.  
   We recommend you press OK (choosing the default settings) since all of 
   these features can be configured on-line when the program is running.
5. After installation, Dr. Schueler's Medical Adviser (UK) should make an
   icon located in the Dr. Schueler's Medical Adviser (UK) program group.
   If you have a substitute desktop program (e.g. Norton's Desktop) you may
   not get an icon set up for you.  If this is the case, you can launch the
   program by double clicking on the HMAWIN.EXE file located in the C:\HMA
   directory in File Manager.  See your desktop documentation for setting up a
   icon (the Dr. Schueler's Medical Adviser (UK) icon should appear if the
   path is set up correctly).


Requirements:

1. Windows 3.1
2. 4 Mb. RAM memory (need at least 2,600 Kb free under Windows).  You can 
   check your system memory by pulling down the Help menu at Program Manager 
   to "About Program Manager."
3. VGA (640x480). 
4. 386-16Mhz or above


Using the Program

We are assuming you are familiar with the use of a mouse and the Windows 3.1 
environment.  If you require additional assistance in Windows, please refer 
to your manual or the appropriate Help section.  The Dr. Schueler's Medical
Adviser (UK) contains help sections at all screens that will describe how
to use the program.


Troubleshooting

1. Screens looks funny (fonts on buttons are too small or difficult to read):  
Check with your video card dealer to make sure you are running the most 
   up-to-date video drivers for your card.  If you do not have the Windows 
   Arial (TrueType font) on your system, then Windows may substitute the 
   next available TrueType (this may not be to your liking!).  Go into 
   Control Panel under Fonts to make sure your TrueType fonts are enabled 
   and Arial is present on your list of available fonts.  If Arial is not 
   present then reinstall the this font using your Windows 3.1 disks.  We 
   have chosen Arial as our button font for its readability.  All other 
   fonts in the HMA can be chosen by you in the Options section.
2. Printing problems:  The Dr. Schueler's Medical Adviser (UK) uses
   Windows Print Manager to perform its printing tasks.  Unlike word
   processing programs that contain their own printer drivers, we are using
   the drivers supported by Windows.  For this reason you must have a Windows
   print driver loaded to Windows.  See your Windows documents or Printers
   under Control Panel to make sure your printer is supported.  Ensure that
   the correct print driver is installed for your printer.  If your printer
   supports multiple emulation modes, ensure that the print driver matches the
   current emulation mode of your printer.


Technical Support 
	Health Perfect Ltd.
	Tel: (0181) 447 8965
	Fax: (0181) 450 1639