850	DIJOY.HLP
5010	Select
5020	Select the game controller that you want to configure or test.\n\n
5021	For information about a particular controller, select the controller and then click Settings.
5030	&Device Assignment...
5040	&Settings...
5050	&Test...
5060	OK
5070	Cancel
5080	&Apply
5130	Position
5150	Joystick
5160	Throttle
5170	Rudder
5180	Point of view hat
5190	Buttons
5300	Settings
5310	If you have attached a rudder or pedals to your controller, select the check box below.
5311	\n
5340	Game Controller Properties
5360	Device Assignment
5370	Device &Selection:
5380	&Assignment:
5400	Game Controller Properties
5410	To calibrate your game controller, click Calibrate.
5420	Product Name:\n\n
5421	\n\n
5422	\n\n
5430	Software Version:
5440	Copyright information:\n\n
5441	© 1996 Microsoft Corporation. All rights reserved.
5450	Product ID Number:
5460	%d device(s) connected
5470	Diagnostic Code:
5520	error
5700	Controller
5710	Status
5720	ID
5730	OK
5740	not connected
5760	Game Controllers
6000	Changes settings for game controller
6010	Controller
6020	controller
6030	controller's
6040	To set your controller's center position, leave its handle centered, and then press a button on the controller.
6050	To set your controller's range of motion, move its handle in complete circles several times, and then press a button on the controller.
6060	To set the range of motion for axis 3, move it all the way up and all the way down several times, and then press a button on the controller.
6070	To set the %1 position for your %2 point of view (POV) hat, move the POV hat to the %3 position, and then press ENTER.
6080	up
6090	down
6100	left
6110	right
6120	Controller %d Test
6130	Button 1
6140	Button 2
6150	Controller %d Calibration
6160	Your game controller is not connected correctly.\n\nEnsure that it is plugged into your computer.
6170	To calibrate your flight yoke's range of motion, move the yoke all the way in and out several times. Then move it all the way to the left and right several times. Finally, press one of the flight yoke's buttons.
6180	You have successfully calibrated your %s. To save your %s calibration, click Finish.
6190	To calibrate the range of motion for your game pad's D-Pad, press all eight of the D-Pad's corners, and then press one of the game pad's buttons.
6200	To set the center position of your game pad's D-Pad, press a button on your game pad without pressing the D-Pad.
6210	To set the center position for your flight yoke, leave the yoke centered, and then press one of its buttons.
6220	Game Controller Error
6230	To set the range of motion for axis 4, move it all the way from one side to the other several times, and then press one of your %s buttons.
6240	To calibrate your race car controller's range of motion, move the steering wheel all the way to the left and right several times. Then press the brake and gas pedals fully several times. Finally, press one of the race car controller's buttons.
6250	To set the center position for your race car controller's steering wheel and pedals, keep the wheel centered, keep your feet off the brake and gas pedals, and then press one of the car controller's buttons.
6260	To confirm your controller's center position, leave its handle centered, and then press a button on the controller.
6270	flight yoke
6280	car controller
6290	game pad
6300	Your computer does not have a game controller port.
6310	You have not finished calibrating your %s. To finish calibrating it, click Back.
6320	To set the range of motion for your U-axis, move it all the way up and all the way down several times, and then press one of your %s buttons.
6330	To set the range of motion for your V-axis, move it all the way up and all the way down several times, and then press one of your %s buttons.
6340	You must restart your computer before the new settings will take effect.\n\n
6341	Do you want to restart your computer now?
6350	Game Controller Settings Change
6360	To confirm the D-Pad's center position, press a button on your game pad without pressing the D-Pad.
6370	To confirm your flight yoke's center position, leave the yoke centered, and then press one of its buttons.
6380	To confirm the center position for your race car controller's steering wheel and pedals, leave the wheel centered, keep your feet off the brake and gas pedals, and then press one of the car controller's buttons.
6390	flight yoke's
6400	car controller's
6410	game pad's
6420	\n(done)
6430	V axis
6440	U axis
6450	Point of view hat
6460	Axis 3
6470	Axes 1 (X) and 2 (Y)
6480	Axis 4
6490	Set &POV 
6500	< &Back
6510	&Next >
6520	&Finish
6530	Calibration Information
7000	(none)
7010	(Custom ...)
8010	Custom Game Controller
8020	Axes
8090	&Special Features
9000	Game Controller
9001	Settings
9002	Test
10051	Test the %s.  If the controller is not working correctly, it may need to be calibrated