DRAWING INTERNAL WALLS

Select the INTERNAL WALL icon

WALLS - HORIZONTAL or VERTICAL on screen
Select the relative position of the secondary line from the dialogue box, and input the wall thickness,
1/ Use the arrow keys to fine tune the position of the wall starting point and press Enter, use the arrow key in the direction to draw the wall, and the input box will show the distance to the nearest wall in that direction,

. input your distance if different from that shown in the input box and press Enter,

2/ To continue from the end of the last wall, just press the arrow key for the new direction

- the function only finishes if the wall you have drawn, meets another wall If you want to close off a wall that does not meet another, just press the '+' key

3/ the internal wall function ceases when your wall meet another wall

HINT
If possible start from an existing wall


ANGLED INTERNAL WALLS

1/ You can draw angled internal walls by pressing Enter on both endpoints.

press Enter on starting point and move cursor to the next point and press Enter

The internal wall function will continue until it meets another wall

2/ angled wall drawn, now to continue to external wall

3/ starting a short wall

4/ to close off a short wall, just press the '+' key. and the function finishes

HINT
Try to start from an existing wall - either the inside line of an external wall or another internal wall

OPENING IN AN INTERNAL WALL
This function is now included with drawing doors, and uses the same doors dialogue box. Select the doors icon, input the width wanted and ignore the number of doors etc.,, - just select the opening radio button, press Enter when the circular cursor is in position on the wall to open up