Soundscape Windows 3.1  Read Me
9/26/95

This document contains important information regarding the
installation and use
of the Soundscape board under DOS and Windows 3.1 operating
system.  It is recommended that you
print this document out and keep it for later reference.

             Installing the Soundscape Software

The Soundscape Applications Disk compliments the Windows 95
driver diskette by providing Windows multimedia
applications, samples, and support for DOS Mode.

To install the software:

1.   Insert disk 1 into your floppy drive.
2.   Select File | Run from the Program Manager
3.   In the Run dialog type x:SETUP where x corresponds to
the floppy drive with the installation disk.
4.   Follow the on screen instructions.

The installation will then proceed to copy the Applications
diskette to your system.  When it is finished you will be
instructed to restart your computer.  You must restart your
computer for the system changes to take affect.
                              
                    Driver Configuration

To access the driver configuration page:

1.Open the Control Panel
2.Double Click the Soundscape Icon

To obtain help on any of these options press F1.