SS_W95.EXE:

ENSONIQ Soundscape software for Windows 95
	Driver version 4.00.38b
	Application version 2.00.24

PLEASE NOTE: These drivers are for the Soundscape card SNDCRD006AAWW,  
SNDCRD006ABWW, and SNDCRD006ACWW only.  These drivers are NOT compatible 
with the SoundscapeVIVO card.  If you are unaware of which Soundscape 
card you own, please contact Gateway technical support before installing 
these drivers.

PLEASE NOTE #2:  There are two things that you need to do in order to 
install the Windows 95 drivers for the Soundscape card.  You must first 
install the Windows 95 drivers; then you must install the applications 
disks.  Please read these instructions thoroughly and then proceed with 
the installation.

Installing the Windows 95 Soundscape drivers for the first time
(use these instructions if you have never had a Soundscape card in your system before)
1. Insert Soundscape PnP card and boot your PC.
	Windows 95 will automatically detect the Soundscape card.
	
	When prompted for which driver to install for the new hardware, you 
	will need to choose "Driver from disk provided by hardware manufacturer" 
	and point the browser to were you extract the files at.

2.  Click on OK.

	It will then prompt you to copy the files from a:\

3.  Click on OK and it will begin copying files from the floppy.
4.  It will then detect the gameport joystick followed by the Soundscape Sound 
	Blaster emulation
	Please note:  	The joystick driver will need to come from the Windows 
	95 install media  or if already installed, Windows 95 will automatically 
	copy the driver for you.

If Windows 95 does not detect the Soundscape Sound Blaster emulation or asks you 
to re-boot before it detects the Sound Blaster emulation, there is a conflict 
in the system. Please refer to the section titled "Driver Configurations."

Updating your Windows 95 SoundscapeVIVO drivers
If you already have a version of the Windows 95 Soundscape drivers installed, the 
procedure to update the driver is very simple.

To access the driver configuration page:

1.	Right click on "My Computer" and select "Properties."
2.	Select the Device Manager tab.
3.  	Double-click on "Sound, video, and game controller."  This will expand 
	that tree branch, allowing you to see the ENSONIQ Soundscape driver.
	
4.	Double-click on the ENSONIQ Soundscape branch and click "Driver."
5.	Click on "Change Driver" and then "Have Disk."
6.	Point the path for the drive to where you have placed the updated driver 
	and click on "OK."
7.  	Choose ENSONIQ Soundscape and click on "OK."
8.  	Click on "OK" again.
 
It will then copy the needed files to your hard drive and update your system.


Installing the Application files and DOS Mode compatibility

Before continuing with your installation, you need to try playing both 
a .WAV file and a .MID file using the media player program to be sure 
that your Soundscape card is functioning normally.  If both files play, 
continue with these installation instructions.  If either file does not 
play, please contact Gateway technical support to trouble shoot your installation.

Now that your drivers are installed and functioning normally, you need to 
install the applications disks, which were included in your download, so 
that you have DOS MODE compatibility and also the Voyetra applications.

The applications disks are very easy to install:

1.  From the Explorer program, open the directory were you extracted the download
2.  Find the SETUP.EXE file and double click on the file
3.  Follow the directions on the screen
4.  When prompted, choose typical install

Continue following the prompts on the screen.  When you are prompted to insert 
disk 2, simply click on OK and the system will continue copying files.  Once 
complete, reboot your system for changes to take effect.

Congratulations, you have now installed everything that you need in order to 
use the Soundscape card including the proper files to initialize your Soundscape 
card when you want to play games in DOS. 

When you want to play games is DOS, simply go to "Start" and then "Shut down and 
restart in MS-DOS Mode" You will see the Soundscape card initialize.  All that 
you need to do now is setup the games and you are ready to play.

If you any questions concerning any of the above information, please contact 
Gateway 2000 technical support.