64OS2222.ZIP - ATI Technologies Inc. ллллллллллллллллллллллллллллллллллллллллллллл ATI Technologies Inc. лллллллл(R)лллп ммм плл 33 Commerce Valley Drive East ллллллллллллп ппп млл Thornhill, ON L3T 7N6 ллллллллллп мллллл ллллллллллллллллл CANADA ллллллллп мллппллл ллллллллп плллл ллллллп мллл лл лллллллл лллл Support: (905) 882-2626 ллллп мллллллммллл лллллллл лллл Support FAX: (905) 882-0546 ллп мллллллллллллл лллллллл лллл Compuserve: GO ATITECH ллм млллллллллллллллм мллллллллм млллл кФФФФФФФФФФФФФФФФФФФФФФФФФФФФФП ллллппппппппппппппппппппппппппппппппппппллллл Г ATI mach64 v2.22 Г лллн T E C H N O L O G I E S I N C . олллл Г OS/2 2.11 and 3.0 Warp Г ллллммммммммммммммммммммммммммммммммммммллллл Г Display Drivers Г ллллллллллллллллллллллллллллллллллллллллллллл РФФФФФФФФФФФФФФФФФФФФФФФФФФФФФй Length Method Size Ratio Date Time CRC-32 Attr Name ------ ------ ----- ----- ---- ---- -------- ---- ---- 877 DeflatN 346 61% 05-24-96 14:08 d3fd5147 --w- LOAD64.VSF 1821 Stored 1821 0% 05-24-96 14:03 c35cec8f --w- DRVRNOTE.LZH 622766 DeflatN 616280 2% 05-15-96 15:58 f94b5716 --w- OS2DRV.LZH 169829 DeflatN 167870 2% 05-15-96 10:59 42d085d2 --w- MACXS.LZH 195186 DeflatN 192764 2% 04-30-96 10:11 da2f381e --w- MACXE.LZH 27477 DeflatN 14308 48% 01-03-96 14:12 345c93d7 --w- PMINST.EXE 2585 DeflatN 1226 53% 06-05-96 17:03 2eae2238 --w- 64OS2222.TXT 1769 DeflatN 708 60% 10-11-95 13:28 6bf42416 --w- PMINST.HLP 2628 DeflatN 1227 54% 06-05-96 17:03 3b50973b --w- README.ATI ------ ------ --- ------- 1024938 996550 3% 9 mach64, 64OS2222.ZIP ***************************** 1.0 Introduction 2.0 Installation Notes ***************************** 1.0 Introduction The mach64 device drivers supplied here are for OS/2 2.1X and OS/2 WARP. ***************************** 2.0 Installation Notes DO NOT TASK SWITCH WHILE RUNNING THE INSTALL PROGRAM. 1. Ensure that you have a copy LOAD64.ZIP. It is available on the ATI BBS, ftp site (ftp.atitech.ca), and on our CompuServe forum (GO ATITECH). 2. Ensure that you have a copy of PKUNZIP.EXE 2.04G. PKUNZIP is available on most BBS and information services, including the ATI BBS and CompuServe. 3. Open a full screen DOS session. 4. Unzip LOAD64.ZIP and 64OS2222.ZIP into the same temporary directory on your hard disk, then run the LOAD64 utility. For example: MD \ATITEMP PKUNZIP LOAD64.ZIP \ATITEMP PKUNZIP 64OS2222.ZIP \ATITEMP CD \ATITEMP LOAD64 5. Follow the screen prompts for installing the OS/2 driver. 6. Once the driver has been installed, you can delete the contents of the temporary directory (DEL \ATITEMP\*.*) and delete the directory itself (RD \ATITEMP). 7. We recommend that you keep a copy of the ZIP files (64OS2222.ZIP and LOAD64.ZIP), in case you need to install the driver again. 8. Run DSPINSTL from within an OS/2 window. 9. When the Display Driver Install panel appears, select Primary Display and click OK to bring up a list of choices. You should see an option for ATI mach64. 10. Select 'ATI mach64 (Enhanced 2.22)' from the list and click OK. If a error message pops-up, which says "The installed adapter does not support the selected display driver. Do you wish to continue?" ignore it and click OK. 11. When the source directory panel appears, select 'Change' and enter: C:\MACH_OS2 (if you don't use c: as you boot drive replace it with the appropriate drive letter) Click 'Set' and then 'Install'. After the files are copied, exit the OS/2 window or full screen session. Shut down and restart your system. 12. The PM driver will first come up in 640x480, 256 colors mode. Use the following steps to change the screen resolutions or number of colors: a) Open 'OS/2 System' icon. b) Open 'System Setup' icon. c) Open 'System' icon. b) Select the 'Screen' tab. e) Select the desired resolution and number of colors from the list. f) Double click on the system menu icon or select close from the system menu to close the window. g) Shut down and restart your system. *****************************