112	Reopen this closed file
113	Reopen this closed file
114	Reopen this closed file
115	Reopen this closed file
116	Reopen this closed file
200	Deletes the unselected sections
201	Mixes the contents of clipboard with this sound starting at the start marker
202	Pastes the clipboard contents into a new sound window
203	Inserts silence at start marker
204	Selects all samples displayed in the window
205	Toggles left, right, or stereo editing
206	Selects the left channel
207	Selects the right channel
208	Selects boths channels
209	Prepares a flashed sound for editing
210	Pastes clipboard contents to a specified location
211	Inserts the clipboard contents at the beginning of the sound
212	Inserts the clipboard contents at the finish marker
213	Appends the clipboard contents to the end of the sound
220	View and zoom operations
221	Zooms out so entire sound is displayed
222	Specify a zoom level
223	Zooms in on the selection
225	Zooms in to user defined level
226	Zooms in to one sample spans 10 pixels
227	Zooms in to one sample spans 5 pixels
228	Zooms in to see actual sound shape
229	Zooms so that 10 samples are mapped to one pixel
230	Zooms so that 100 samples are mapped to one pixel
235	Jumps to the start marker
236	Jumps to the finish marker
241	Adds an echo or reverb
242	Exchanges left and right channels
243	Linearly interpolates points between markers
244	Inverts the wave
245	Adds a mechanical quality
246	Shifts the wave up or down to remove a dc offset
247	Pans and mixes channels
248	Reverses the selection
249	Silences the selection
250	Changes the playback rate of entire sound
251	Changes sampling rate of entire sound
252	Changes pitch of entire sound
253	Shapes the pitch of a sound
254	Audio effects operations
255	Distorts, compresses, expands, or alters volume levels
256	Adds a flange
257	Makes one instrument or voice sound like many
260	Filter related commands
261	Removes noise from silent regions
262	Creates a general filter
263	Creates and applies a lowpass or highpass filter
264	Creates and applies a bandpass or bandstop filter
265	Filters sound using a parametric equalizer
266	Removes noise below a frequency threshold
267	Defines or uses a coefficient based filter
270	Volume related commands
271	Permanently changes the volume
272	Fades in from a specified volume to full volume
273	Fades out from full volume to a specified volume
274	Maximizes (normalizes) volume
275	Shapes the volume envelope
300	Tools for working with audio
301	Adds, deletes, or edits cue (reference) points
302	Shows the CD player
303	Shows volume controls
304	Shows or hides Device Controls
350	Displays the expression evaluator
400	Preferences and configuration operations
401	Sets Sound window colours
402	Sets file related options
403	Sets window related options
404	Enter a password to register GoldWave
2000	Access online help
2001	Help table of contents
2002	Help on using online Help
2009	About GoldWave
5080	Record
5088	Cannot send audio data to the device.
5089	Cannot prepare sound for recording.
5090	Sound is currently in use by another device.
5091	No timers available.  Please close other applications to free timers and restart GoldWave.
5092	No output device drivers have been installed in this system.
5093	No input device drivers have been installed in this system.
5094	Output Device
5095	Input Device
5096	CD Player
5097	Device Controls
10001	 to 
10002	 smp
10003	Flashed
10004	Original
10005	Changed
10006	Mono
10007	Left
10008	Right
10009	Stereo
10010	Zoom
10021	8-bit
10022	12-bit
10023	16-bit
10024	µ-law
10025	A-law
10026	Java/Web
10027	IEEE double
10028	Microsoft ADPCM
10029	ASCII
10030	4-bit VOX ADPCM
10031	MPEG audio
10032	Microsoft ACM
10033	SDS dump
10040	unsigned
10041	signed
10042	mono
10043	stereo
10044	byte swapped
10045	
10050	Supported files|*.wav;*.voc;*.au;*.snd;*.iff;*.afc;*.aifc;*.aif;*.aiff;*.mat;*.raw;*.vox;*.dwd;*.smp;*.sds|PC formats|*.wav;*.voc;*.mat;*.raw;*.vox;*.sds|Other formats|*.au;*.snd;*.iff;*.afc;*.aifc;*.aif;*.aiff|All files (*.*)|*.*|
10060	None
10061	Wave
10062	Voc
10063	Sun
10064	Raw
10065	Matlab
10066	Apple
10067	Apple-C
10068	Amiga
10069	Dialogic
10070	DiamondWare
10071	Sample Vision
10072	MIDI Sample
10080	*.wav;*.voc;*.au;*.snd;*.iff;*.aif;*.aiff;*.afc;*.aifc;*.mat;*.raw;*.vox;*.dwd;*.smp;*.sds
10081	*.wav
10082	*.voc
10083	*.au
10084	*.snd;*.raw
10085	*.mat
10086	*.aif
10087	*.afc
10088	*.iff
10089	*.vox
10090	*.dwd
10091	*.smp
10092	*.sds
10100	Command completed successfully.
10101	Could not open file.  Make sure the file exists and the disk is ready.
10102	Internal error: Not type.
10103	Audio data in file is corrupt.
10104	There is not enough free memory available.  Try closing one or more applications to free some memory.
10105	Could not read from original sound file.  Make sure the disk is ready.
10106	Could not write data to disk.  Make sure there is ample space free on the disk.
10107	Internal error: Unknown file type or format.
10108	File gives a length of 0 for audio data or audio data is missing!  Sound cannot be read.
10109	Wave file is missing 'fact' chunk!  Sound cannot be read.
10110	File contains two or more sounds with different formats.  Sounds cannot be read.
10111	Could not create file.  Make sure the disk drive is ready and is not read-only.
10112	Operation aborted by user.
10113	Calculation error: division by zero, overflow, or invalid floating point.
10114	Could not find or open an audio format converter.
10120	Converting And Saving
10121	Deflashing To Memory
10122	Deflashing To Disk
10123	Initializing New Sound
10124	Scanning Maximum
10125	Scanning Offset
10130	Chorus
10131	Distortion
10132	Doppler
10133	Echo
10134	Exchange
10135	Flange
10140	Interpolate
10141	Invert
10142	Mechanize
10143	Offset
10144	Pan
10145	Reverse
10146	Silence
10151	Change Volume
10152	Fade In
10153	Fade Out
10154	Maximize Volume
10155	Shape Volume
10161	Noise Gate
10162	Frequency Gate
10163	Filter
10164	Parametric EQ
10165	User Defined Filter
10166	Playback Rate
10167	Resample
10168	Transpose
10171	Undo
10172	Cut
10173	Copy
10174	Paste
10175	Delete
10176	Mix
10177	Trim
10178	Insert Silence
10197	Cue Points
10198	View Any
10199	Direct Edit
10300	Undo
10301	Cannot create undo file.
10302	Cannot open undo file.
10303	Not enough free memory available for undo.
10304	There is not enough disk space to prepare undo file.  Continue?
10305	Could not read from undo file.
10306	&Undo %s	Ctrl+Z
10500	Volume
10501	Delay
10502	Offset
10503	Fade
10504	Initial volume
10505	Quality
10506	Time
10507	Rate
10508	Fine tune
10509	Input volume
10510	Mix volume
10511	Fixed delay
10512	Depth
10513	Frequency
10514	Feedback
10515	Decay time
10516	Threshold
10517	Zoom
10518	User zoom
10519	Initial
10520	Final
10521	Steepness
10522	From
10523	To
10580	%
10581	s
10582	ms
10583	Hz
10600	Using reverb with a volume greater than 100% may cause feedback overflow.
10601	Coefficients entry error.  Please enter floating point numbers (magnitude < 120) separated by commas.
10602	Number of coefficients for a(n) and b(n) do not match or too many coefficients.
10603	Cannot access or find path:\n
10604	Could not recognize clipboard format or not enough free memory.
10605	Not enough memory to change cue point.
10606	Cannot place start marker after finish marker.
10607	Cannot place finish marker before start marker.
10608	Cannot place finish marker outside file limits.
10609	New
10610	Start
10611	Finish
10612	Cue points are saved only in Wave files.  If you need to preserve the cue points, choose Cancel and save this file as a Wave.
10613	Cannot save a flashed file.  Please deflash the file before saving.
10614	Please find and replace all old copies of BWCC with the newer one included with GoldWave (see README.TXT).  Please exit now.\n\nOld file: 
10615	Old version of BWCC Detected
10616	File has been converted and saved to disk.  Update the Sound window with the new format?
10617	Filter width is too narrow.
10800	Finished
10801	Syntax error
10802	Missing operand
10803	Missing operator
10804	Unmatched '('
10805	Unmatched ')'
10806	Function needs '('
10807	Divide by zero
10808	General calculation error
10809	Internal stack error!
10810	Overflow error
10811	Underflow error
10812	Destination range error
10813	Number of 'wave#' does not exist
10814	Stopped by user
10815	Not enough memory
10816	Could not access or prepare sound
10850	Evaluate
10851	Evaluator
10852	Expression name is missing or invalid.  Please type in or select an expression name.  Names cannot contain ']', '[', ';', or '='.
10853	Group name is missing or invalid.  Please type in or select a group name.  Names cannot contain ']', '[', ';', or '='.
10854	The specified Group/Expression does not exist.  Please select the correct names from the lists.
10855	Given group name is reserved for internal use only.  Please use a different name.
10856	Create the new group "%s"?
10857	Overwrite expression "%s" with the current one?
10858	Not enough memory to save expression.
10901	Data Error
10902	entry error.\nPlease enter numbers only.
10903	Range Error
10904	is out of range.\nValid range:
10905	entry error.\nPlease enter a floating point number.
24310	Quits GoldWave and prompts to save sounds
24320	Edit operations
24321	Reverses the last operation
24322	Cuts the selection and puts it on the Clipboard
24323	Copies the selection and puts it on the Clipboard
24324	Inserts the clipboard contents at the start marker
24325	Deletes the selection
24330	File operations
24331	Creates a new sound window
24332	Opens an existing sound
24333	Saves this sound
24334	Saves this sound with a new name
24335	Reverts changes to last time sound was saved
24339	Closes this sound
24341	Create a new view for this sound
24360	Window arrangement and selection
24361	Cascades open windows
24362	Tiles open windows
24363	Tiles open windows horizontally
24364	Arranges iconic windows along bottom
24365	Closes all open windows
32500	&File
32501	--Sound Type--
32502	--View Type--
32503	Sound
32504	Unable to open sound.
32505	Unable to close sound.
32506	Sound read error.
32507	Sound write error.
32508	The sound has been changed.\n\nDo you want to save the changes?
32509	The sound has not been changed.
32510	Document Manager not present.
32511	Insufficient memory for view.
32512	Sound already loaded.
32520	Input does not conform to picture:\n"%s"
32521	Invalid character in input
32522	Value is not in the range %ld to %ld.
32523	Input is not in valid-list
32530	EXT|CAPS|NUM|SCRL|OVR|REC
32531	   |    |   |    |   |   
32732	Invalid DIB handle %X
32733	GDI object %X destroy failure
32734	GDI object %X delete failure
32735	GDI file read failure
32736	GDI resource load failure
32737	GDI creation failure
32738	GDI allocate failure
32739	GDI failure
32740	Invalid relative window specified in layout constraint in window %s
32741	Incomplete layout constraints specified in window %s
32742	Printer error
32743	Validator syntax error
32744	Menu creation failure
32745	Child create fail for window %s
32746	Execute fail for window %s
32747	Create fail for window %s
32748	Child class registration fail for window %s
32749	Class registration fail for window %s
32754	Invalid client window %s
32755	Invalid child window %s
32756	Invalid window %s
32758	VBX Library init failure
32759	Invalid MainWindow
32760	Invalid module specified for window
32761	Out of memory
32762	No application object
32763	Unknown error
32764	Unhandled Exception
32765	OK to resume?
32766	ObjectWindows Exception
32767	Unknown exception
61440	Changes the size of the window
61456	Moves the window to another position
61472	Reduces the window to an icon
61488	Enlarges the window to it maximum size
61504	Switches to next window
61536	Closes the window
61728	Restores the window to its previous size
61744	Opens task list