100	win31
101	win3x
102	win40
103	win41
104	win4x
105	win50
106	windows
107	winnt10
108	winnt30
109	winnt350
110	winnt351
111	winnt35x
112	winnt40
113	winnt50
114	winnt
1100	English
1101	EPSON Port Reconnector
1111	OK
1112	Cancel
1113	Retry
1114	Abort
1115	Please wait...
1116	Detect...
1131	The printer port will be configured automatically.\n\nMake sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
1132	Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
1133	Printer driver installation and port configuration were completed successfully.
1134	Printer port configuration was not completed.\n\nRestart your computer, and check the port settings before using the printer.
1135	The printer port connection could not be confirmed.\n\nMake sure that the printer is connected properly and that the power is on, then click the Retry button.
1136	The printer may not be connected properly, or a different printer may be connected.\n\nConfirm the printer and its connections, then click the Retry button.
1137	The printer port connection could not be confirmed.\n\nSee the Troubleshooting section of your manual, then try to configure the port again.
1138	\n\nIf you do not want to configure the printer port automatically, or if your printer is connected through a network, click the Cancel button.
1200	German
1201	EPSON Port Reconnector
1211	Weiter
1212	Abbrechen
1213	Wiederh
1214	Abbrechen
1215	Bitte warten Sie...
1216	Detect...
1231	Der Druckeranschluß wird automatisch konfiguriert.\n\nStellen Sie sicher, daß der Drucker an den Computer angeschlossen ist. Schalten Sie anschließend den Drucker ein, und warten Sie, bis die Konfiguration abgeschlossen ist.
1232	Stellen Sie sicher, daß der Drucker an den Computer angeschlossen ist. Schalten Sie anschließend den Drucker ein, und warten Sie, bis die Konfiguration abgeschlossen ist.
1233	Die Installation des Druckertreibers und die Konfiguration der Schnittstelle wurden erfolgreich abgeschlossen.
1234	Die Konfiguration des Druckeranschlusses wurde nicht vollständig abgeschlossen.\n\nÜberprüfen Sie die Einstellungen der Schnittstelle, bevor Sie den Drucker verwenden.
1235	Die Verbindung zum Druckeranschluß konnte nicht bestätigt werden.\n\nStellen Sie sicher, daß der Drucker richtig angeschlossen und eingeschaltet ist. Klicken Sie anschließend auf die Schaltfläche Wiederholen.
1236	Der Drucker ist möglicherweise nicht richtig angeschlossen, oder ein anderer Drucker ist angeschlossen.\n\nBestätigen Sie den Drucker und die Verbindungen. Klicken Sie anschließend auf die Schaltfläche Wiederholen.
1237	Die Verbindung zum Druckeranschluß konnte nicht bestätigt werden.\n\nSehen Sie im Abschnitt Problemlösung in Ihrem Handbuch nach, und versuchen Sie anschließend, die Schnittstelle neu zu konfigurieren.
1238	\n\nWenn Sie den Druckeranschluß nicht automatisch konfigurieren möchten, oder wenn Ihr Drucker über ein Netzwerk angeschlossen ist, klicken Sie auf die Schaltfläche Abbrechen.
1300	Spanish
1301	EPSON Port Reconnector
1311	OK
1312	Cancelar
1313	Reintentar
1314	Cancelar
1315	Por favor, espere...
1316	Detect...
1331	El puerto de impresora se configurará automáticamente.\n\nAsegúrese que la impresora está conectada al ordenador, después encienda la impresora y espere que continue la configuración.
1332	Asegúrese que la impresora está conectada al ordenador, después encienda la impresora y espere que continue la configuración.
1333	La instalación del driver de la impresora y la configuración del puerto han finalizado con éxtito.
1334	No ha finalizado la configuración del puerto de impresora.\n\nCompruebe los ajustes del puerto antes de usar la impresora.
1335	La conexión del puerto de impresora puede ser que no esté confirmada.\n\nAsegúrese que la impresora está conectada correctamente y que está encendida, después pulse el botón Reintentar.
1336	Puede ser que la impresora no esté conectada correctamente, o puede ser que esté conectada otra impresora.\n\nConfirme la impresora y sus conexiones, después pulse el botón Reintentar.
1337	La conexión del puerto de impresora puede ser que no esté confirmada.\n\nConsulte la sección de problemas y soluciones de su manual, después intente configurar el puerto otra vez.
1338	\n\nSi no quiere configurar el puerto de impresora automáticamente, o si su impresora se ha conectado a través de la red, pulse el botón Cancelar.
1400	French
1401	EPSON Port Reconnector
1411	OK
1412	Annuler
1413	Recommencer
1414	Terminer
1415	Attendez...
1416	Detect...
1431	Le port d'impression sera automatiquement configuré.\n\nAssurez-vous que l'imprimante soit correctement connectée à votre ordinateur, mettez la alors sous tension et attendez que la configuration s'initialise.
1432	Assurez-vous que l'imprimante soit correctement connectée à votre ordinateur, mettez la alors sous tension et attendez que la configuration s'initialise.
1433	L'installation du pilote d'impression et la configuration du port se sont terminés correctement.
1434	L'installation du port d'impression ne s'est pas correctement terminée.\n\nVérifiez la configuration de ce port avant d'utiliser l'imprimante.
1435	Le port d'impression ne peut être confirmé.\n\nAssurez-vous que l'imprimante soit correctement connectée et qu'elle soit sous tension, cliquez alors sur le bouton Recommencer.
1436	L'imprimante n'est pas correctement connectée, ou une autre imprimante est connectée.\n\nVérifiez la bonne connexion de cette imprimante, puis cliquez sur le bouton Recommencer.
1437	Le port d'impression ne peut être confirmé.\n\nConsultez la section dépannage de votre manuel d'utilisation, essayez de nouveau de configurer le port.
1438	\n\nSi vous ne voulez pas configurer ce port imprimante automatiquement, ou si votre imprimante est connectée au travers d'un réseauo, cliquez sur le bouton Annuler.
1500	Italian
1501	EPSON Port Reconnector
1511	OK
1512	Annulla
1513	Riprova
1514	Anular
1515	Attendere...
1516	Detect...
1531	La porta stampante sarà configurata automaticamente.\n\nAssicuratevi che la stampante sia collegata al computer, quindi accendetela e attendete la configurazione per proseguire.
1532	Assicuratevi che la stampante sia collegata al computer, quindi accendetela e attendete la configurazione per proseguire.
1533	Installazione del driver di stampante e configurazione della porta completate correttamente.
1534	Configurazione della porta stampante non completata.\n\nControllate le impostazioni della porta prima di usare la stampante.
1535	Non è stato possibile verificare il collegamento della porta stampante.\n\nAssicuratevi che la stampante sia collegata correttamente e che sia accesa, quindi fate clic sul pulsante Riprova.
1536	La stampante potrebbe non essere collegata correttamente, o è collegata una stampante differente.\n\nVerificate la stampante e i collegamenti, quindi fate clic sul pulsante Riprova.
1537	Non è stato possibile verificare il collegamento della porta stampante.\n\nConsultate la sezione sulla risoluzione dei problemi del manuale, quindi riprovate a configurare la porta.
1538	\n\nSe non volete configurare la porta stampante automaticamente, o se la stampante è collegata attraverso una rete, fate clic sul pulsante Annulla.
1600	Portuguese
1601	EPSON Port Reconnector
1611	OK
1612	Cancelar
1613	Repetir
1614	Anular
1615	Aguarde...
1616	Detect...
1631	A porta da impressora será configurada automaticamente.\n\nCertifique-se de que a impressora está ligada ao computador. Em seguida, active a impressora e aguarde pelo respectivo processo de configuração.
1632	Certifique-se de que a impressora está ligada ao computador. Em seguida, active a impressora e aguarde pelo respectivo processo de configuração.
1633	A instalação do controlador da impressora e a configuração da porta foram bem sucedidas.
1634	A configuração da porta da impressora não foi concluída.\n\nVerifique as definições da porta antes de utilizar a impressora.
1635	Impossível confirmar ligação da porta da impressora.\n\nCertifique-se de que a impressora está activada e que as respectivas ligações estão correctas. Em seguida, faça clique na tecla Repetir.
1636	É possível que a impressora não esteja ligada correctamente ou que esteja ligada uma impressora diferente.\n\nVerifique a impressora e as respectivas ligações; em seguida, faça clique na tecla Repetir.
1637	Impossível confirmar ligação da porta da impressora.\n\nConsulte o capítulo de resolução de problemas do manual da impressora e tente configurar a porta novamente.
1638	\n\nSe não quiser configurar a porta da impressora automaticamente ou se a impressora estiver ligada em rede, faça clique na tecla Cancelar.
1700	LatinSpanish
1701	EPSON Port Reconnector
1711	OK
1712	Cancelar
1713	Reintentar
1714	Cancelar
1715	Por favor, espere...
1716	Detect...
1731	El puerto de impresora se configurará automáticamente.\n\nAsegúrese que la impresora está conectada al ordenador, después encienda la impresora y espere que continue la configuración.
1732	Asegúrese que la impresora está conectada al ordenador, después encienda la impresora y espere que continue la configuración.
1733	La instalación del driver de la impresora y la configuración del puerto han finalizado con éxtito.
1734	No ha finalizado la configuración del puerto de impresora.\n\nCompruebe los ajustes del puerto antes de usar la impresora.
1735	La conexión del puerto de impresora puede ser que no esté confirmada.\n\nAsegúrese que la impresora está conectada correctamente y que está encendida, después pulse el botón Reintentar.
1736	Puede ser que la impresora no esté conectada correctamente, o puede ser que esté conectada otra impresora.\n\nConfirme la impresora y sus conexiones, después pulse el botón Reintentar.
1737	La conexión del puerto de impresora puede ser que no esté confirmada.\n\nConsulte la sección de problemas y soluciones de su manual, después intente configurar el puerto otra vez.
1738	\n\nSi no quiere configurar el puerto de impresora automáticamente, o si su impresora se ha conectado a través de la red, pulse el botón Cancelar.
1800	BrazPortuguese
1801	EPSON Port Reconnector
1811	OK
1812	Cancelar
1813	Repetir
1814	Anular
1815	Aguarde...
1816	Detect...
1831	A porta da impressora será configurada automaticamente.\n\nCertifique-se de que a impressora está ligada ao computador. Em seguida, active a impressora e aguarde pelo respectivo processo de configuração.
1832	Certifique-se de que a impressora está ligada ao computador. Em seguida, active a impressora e aguarde pelo respectivo processo de configuração.
1833	A instalação do controlador da impressora e a configuração da porta foram bem sucedidas.
1834	A configuração da porta da impressora não foi concluída.\n\nVerifique as definições da porta antes de utilizar a impressora.
1835	Impossível confirmar ligação da porta da impressora.\n\nCertifique-se de que a impressora está activada e que as respectivas ligações estão correctas. Em seguida, faça clique na tecla Repetir.
1836	É possível que a impressora não esteja ligada correctamente ou que esteja ligada uma impressora diferente.\n\nVerifique a impressora e as respectivas ligações; em seguida, faça clique na tecla Repetir.
1837	Impossível confirmar ligação da porta da impressora.\n\nConsulte o capítulo de resolução de problemas do manual da impressora e tente configurar a porta novamente.
1838	\n\nSe não quiser configurar a porta da impressora automaticamente ou se a impressora estiver ligada em rede, faça clique na tecla Cancelar.
1900	Chinese
1901	EPSON Port Reconnector
1911	OK
1912	Cancel
1913	Retry
1914	Abort
1915	Please wait...
1916	Detect...
1931	The printer port will be configured automatically.\n\nMake sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
1932	Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
1933	Printer driver installation and port configuration were completed successfully.
1934	Printer port configuration was not completed.\n\nRestart your computer, and check the port settings before using the printer.
1935	The printer port connection could not be confirmed.\n\nMake sure that the printer is connected properly and that the power is on, then click the Retry button.
1936	The printer may not be connected properly, or a different printer may be connected.\n\nConfirm the printer and its connections, then click the Retry button.
1937	The printer port connection could not be confirmed.\n\See the Troubleshooting section of your manual, then try to configure the port again.
1938	\n\nIf you do not want to configure the printer port automatically, or if your printer is connected through a network, click the Cancel button.
2000	Hungeul
2001	EPSON Port Reconnector
2011	OK
2012	Cancel
2013	Retry
2014	Abort
2015	Please wait...
2016	Detect...
2031	The printer port will be configured automatically.\n\nMake sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2032	Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2033	Printer driver installation and port configuration were completed successfully.
2034	Printer port configuration was not completed.\n\nRestart your computer, and check the port settings before using the printer.
2035	The printer port connection could not be confirmed.\n\nMake sure that the printer is connected properly and that the power is on, then click the Retry button.
2036	The printer may not be connected properly, or a different printer may be connected.\n\nConfirm the printer and its connections, then click the Retry button.
2037	The printer port connection could not be confirmed.\n\See the Troubleshooting section of your manual, then try to configure the port again.
2038	\n\nIf you do not want to configure the printer port automatically, or if your printer is connected through a network, click the Cancel button.
2100	Dutch
2101	EPSON Port Reconnector
2111	OK
2112	Cancel
2113	Retry
2114	Abort
2115	Please wait...
2116	Detect...
2131	The printer port will be configured automatically.\n\nMake sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2132	Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2133	Printer driver installation and port configuration were completed successfully.
2134	Printer port configuration was not completed.\n\nRestart your computer, and check the port settings before using the printer.
2135	The printer port connection could not be confirmed.\n\nMake sure that the printer is connected properly and that the power is on, then click the Retry button.
2136	The printer may not be connected properly, or a different printer may be connected.\n\nConfirm the printer and its connections, then click the Retry button.
2137	The printer port connection could not be confirmed.\n\See the Troubleshooting section of your manual, then try to configure the port again.
2138	\n\nIf you do not want to configure the printer port automatically, or if your printer is connected through a network, click the Cancel button.
2200	Russian
2201	EPSON Port Reconnector
2211	OK
2212	Cancel
2213	Retry
2214	Abort
2215	Please wait...
2216	Detect...
2231	The printer port will be configured automatically.\n\nMake sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2232	Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2233	Printer driver installation and port configuration were completed successfully.
2234	Printer port configuration was not completed.\n\nRestart your computer, and check the port settings before using the printer.
2235	The printer port connection could not be confirmed.\n\nMake sure that the printer is connected properly and that the power is on, then click the Retry button.
2236	The printer may not be connected properly, or a different printer may be connected.\n\nConfirm the printer and its connections, then click the Retry button.
2237	The printer port connection could not be confirmed.\n\See the Troubleshooting section of your manual, then try to configure the port again.
2238	\n\nIf you do not want to configure the printer port automatically, or if your printer is connected through a network, click the Cancel button.
2300	Thai
2301	EPSON Port Reconnector
2311	OK
2312	Cancel
2313	Retry
2314	Abort
2315	Please wait...
2316	Detect...
2331	The printer port will be configured automatically.\n\nMake sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2332	Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2333	Printer driver installation and port configuration were completed successfully.
2334	Printer port configuration was not completed.\n\nRestart your computer, and check the port settings before using the printer.
2335	The printer port connection could not be confirmed.\n\nMake sure that the printer is connected properly and that the power is on, then click the Retry button.
2336	The printer may not be connected properly, or a different printer may be connected.\n\nConfirm the printer and its connections, then click the Retry button.
2337	The printer port connection could not be confirmed.\n\See the Troubleshooting section of your manual, then try to configure the port again.
2338	\n\nIf you do not want to configure the printer port automatically, or if your printer is connected through a network, click the Cancel button.
2400	Greek
2401	EPSON Port Reconnector
2411	OK
2412	Cancel
2413	Retry
2414	Abort
2415	Please wait...
2416	Detect...
2431	The printer port will be configured automatically.\n\nMake sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2432	Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.
2433	Printer driver installation and port configuration were completed successfully.
2434	Printer port configuration was not completed.\n\nRestart your computer, and check the port settings before using the printer.
2435	The printer port connection could not be confirmed.\n\nMake sure that the printer is connected properly and that the power is on, then click the Retry button.
2436	The printer may not be connected properly, or a different printer may be connected.\n\nConfirm the printer and its connections, then click the Retry button.
2437	The printer port connection could not be confirmed.\n\See the Troubleshooting section of your manual, then try to configure the port again.
2438	\n\nIf you do not want to configure the printer port automatically, or if your printer is connected through a network, click the Cancel button.