CUSL2 (ATX, 6 PCI, 2 CNR, 2x UDMA/100, 3x DIMM)

- BIOS Upgrade and Road Map :
Notice:
If you are going to upgrade BIOS from BIOS version 1001.A (and earlier) for CUSL2, please make sure the following item in the BIOS setup menu is set at [PCI/AGP] before updating the BIOS with v1.27 flash tool.

Advanced -> PCI Configuration -> VGA BIOS Sequence 

In case the system is unable to start up properly after performing BIOS upgrade, please remove all the add-on VGA adapters from the system and start up the system with the onboard AGP graphics controller or clear CMOS. The add-on VGA adapters then can be installed after loading the setup default from the BIOS setup menu.

Aflash.exe 
CUSL2 BIOS Flash Tool v1.27 08/28/2000 
Solve using previous flash tool would not boot up. 
Csla1009.zip 
CUSL2 BIOS With Audio Ver. 1009 08/09/2001 

cusl1009.zip 
CUSL2 BIOS Without Audio Ver. 1009 08/09/2001 
Fix VGA BIOS of I815E internal graphics unable to turn on monitor after system resumes from APM standby state. 
Update VGA BIOS.