6610S032 :
	1. support new CPU Mendocino (Celeron 128Kb cach)
	2. fix  Winfast 3D S800 AGP card post fail
	3. fix use some PCI modem and use "KB" or "PS2 mouse" power on function will 
		hang up when post 
	4. update CPUCODE
	5. support 133Mhz
	6. fix ISA PNP device can't show message in post

6610S043 :
	1. support 4Mx4 4Mx8 SDRAM
	2. DMI support Celeron CPU
	3. new CPU Mendocino 300 Mhz show 300A Mhz
	4. fix "PCI Latency Timer" press "F1" cause error
	5. support S3 SAVAGE 3D chipset VGA card and FIRE GL5000 AGP card
	6. update CPUCODE

6610S058 :
	1. fix can't detect ZIP driver when reset
	2. item "Init Display First" fail
	3. use manual set CPU speed may display CPU overspeed warning message
	4. ZIP driver set H.D. mode fail
	5. some Y2K RTC test fail
	6. if memory use over 512MB ,windows speed will run slow
	7. can't install NT5.0  ACPI mode
	8. support Pentium III CPU
	9. update CPUCODE
	10. POST message "copyright(c) 1984-98" change to "copyright(c) 1984-99"
	11. CMOS default year change to 1999

6610S061 :
	1. add setup item "Processor Serial Number" if use Pentium III CPU

6610S074 :
	       
        1. Fix when using ATA 66 HD can't enable DMA mode in WIN95/98
	2. Update DMI support PIII CPU
	3. Update DMI information "CPU MAX SPEED" from 500 to 900
	4. Add "LOCK" function in item "CPU Clock Rate" and set it to default, then item
	   "CPU SPEED" will be disabled
	5. Update CPU code (PIII 550Mhz CPU)
        6. Fix when using PIII 550 CPU display speed error
	7. Fix when using WD HD cannot be detected when WIN95/98 restart
	8. Fix "Wake On Lan" can not work when using 3com lan card with LDCM
 
6610S124 :
	1. ZIP driver set H.D. mode fail
	2. some Y2K RTC test fail
	3. can't install NT5.0  ACPI mode
	4. support Pentium III CPU
	5. update CPUCODE
	6. POST message "copyright(c) 1984-98" change to "copyright(c) 1984-99"
	7. CMOS default year change to 1999

6610S131 :
	1. add setup item "Processor Serial Number" if use Pentium III CPU

6610S144 :
	
        1. Fix when using ATA 66 HD can't enable DMA mode in WIN95/98
	2. Update DMI support PIII CPU
	3. Update DMI information "CPU MAX SPEED" from 500 to 900
	4. Add "LOCK" function in item "CPU Clock Rate" and set it to default, then item
	   "CPU SPEED" will be disabled
	5. Update CPU code (PIII 550Mhz CPU)
        6. Fix when using PIII 550 CPU display speed error
	7. Fix when using WD HD cannot be detected when WIN95/98 restart
	8. Fix "Wake On Lan" can not work when using 3com lan card with LDCM

6610S151 :
	1. fix CHIPSET FEATURE have garbage  

6610S162 :
	1. IBM 15GB HD from LBA mode to CHS mode after FDISK
	2. 3D LAB AGP card can't display
	3. add "keyboard 98" power on function
	4. update CPUCODE
6610s164:
	1. IBM 37.5GB support
	2. Coppermine CPU support