About the Windows 2000 WDM driver (test version)              2000/4/7
                                                              Ver.1.00


 Thank you for purchasing the Canopus MVR-D2000.
 This ReadMe file contains information about the Windows 2000 WDM driver. Please check this ReadMe before using your MVR-D2000.


What's inside in this document

    (1)Inside the Windows 2000 WDM driver disk (Disk1)
    (2)Installing the WDM driver
    (3)Installing NT driver
    (4)Power management setting for the WDM driver
    (5)Registered Trademarks and Trademarks
    (6)Revision Dates



(1)Inside the Windows 2000 WDM driver disk (Disk1)

WdmReadme.txt  ;this file
win2k.Nt\
    MvrKrnl.sys   ;Windows NT driver(legacy drivers)
    MvrKrnl.inf   ;Inf file for installing the NT driver to Win2000

win2k.Wdm\
    MvrKrnl.sys   ;Windows 2000 driver(WDM(Windows Driver Model)driver)
    MvrKrnl.inf   ;INf file for installing to Windows 2000




(2)Installing the WDM driver
 (Plug and Play setup)
  1. Log on as an user with administrator privilege.
  2. If you connect the MVR-D2000 after you install Windows2000, the board will be detected by plug & play.
  3. Found New Hardware Wizard will start. Select "Display a list of the known drivers for this device..." and click [Next].
  4. In the [Hardware type], select "Sound, video and game controllers" and click [Next].
  5. In the [Select a device driver], click [Have Disk].
  6. Insert MVR-D2000 DISK1 to the floppy disk drive. In the [Install from disk] window, type A:\Win2K.Wdm
  7. Select "MVR-D2000 Kernel Mode Driver for Windows 2000. Click [Next].
  8. Click [Next].
  10. "Digital Signature Not Found" dialog will show during setup. Click [Yes].
  11. Click [Finish]. Reboot Windows


 (Manual setup)
  1. Log on as an user with administrator privilege.
  2. Right-click [My Computer] and click [manage]
  3. Click [Device Manager]
  4. From [Other devices], click one of the [Multimedia Controller]
  5. In the [Driver] tab, click [Update Driver]
  6. The Upgrade device driver wizard will open. Follow the on-screen instructions. The drivers will be found in A:\Win2K.Wdm.
  7. "Digital Signature Not Found" dialog will show during setup. Click [Yes].
  8. Reboot Windows


  * If you can not select [Yes] in the Digital Signature Not Found dialog, please follow the below steps:
  1. Right-click [My Computer] and click [Properties]
  2. In the [Hardware] tab, click [Driver Signing].
  3. In the [File Signature Verification] box, select [Warn], and click [OK].




(3)Installing the NT driver
 (Plug and Play setup)
  1. Log on as an user with administrator privilege.
  2. If you connect the MVR-D2000 after you install Windows2000, the board will be detected by plug & play.
  3. Found New Hardware Wizard will start. Select "Display a list of the known drivers for this device..." and click [Next].
  4. In the [Hardware type], select "Sound, video and game controllers" and click [Next].
  5. In the [Select a device driver], click [Have Disk].
  6. Insert MVR-D2000 DISK1 to the floppy disk drive. In the [Install from disk] window, type A:\Win2K.Nt
  7. Select "MVR-D2000 Kernel Mode Driver for Windows NT. Click [Next].
  8. Click [Next].
  10. "Digital Signature Not Found" dialog will show during setup. Click [Yes].
  11. Click [Finish]. Reboot Windows


 (Manual setup)
  1. Log on as an user with administrator privilege.
  2. Right-click [My Computer] and click [manage]
  3. Click [Device Manager]
  4. From [Other devices], click one of the [Multimedia Controller]
  5. In the [Driver] tab, click [Update Driver]
  6. The Upgrade device driver wizard will open. Follow the on-screen instructions. The drivers will be found in A:\Win2K.Nt.
  7. "Digital Signature Not Found" dialog will show during setup. Click [Yes].
  8. Reboot Windows


  * If you can not select [Yes] in the Digital Signature Not Found dialog, please follow the below steps:
  1. Right-click [My Computer] and click [Properties]
  2. In the [Hardware] tab, click [Driver Signing].
  3. In the [File Signature Verification] box, select [Warn], and click [OK].




(4)Power management setting for the WDM driver
  1. Install the WDM driver to Windows 2000.
  2. Run MvrProp.exe
  3. Select [Power Management] tab. 
  4. Select one of the below options. To change to another option, you have to reboot windows.
     (a) Windows 2000 (default) 
        Operates as the power policy owner for Windows2000 Device Driver Kit.
     (b) Windows 98 WDM
        Operates as the power policy owner for Windows98 Device Driver Kit.
     (c) Disable
        Disable power management.
  5. If the shutdown/start/standby does not work properly, select (b) or (c).




(5)Registered Trademarks and Trademarks
   Canopus is a registered trademark of Canopus Corporation and Canopus Co., Ltd.
  Windows NT, Microsoft are registered trademarks of Microsoft Corporation.

  All other registered trademarks and trademarks belong to their respective holders.




(6)Revision Dates

 The version number stated here is given to product as a whole. A different version number may be given to separate applications or drivers.

------------------------------------
Version 1.00     Release: 2000/4/7
------------------------------------
First release.