Version: 1.06 
File: S381106T.EXE 
Date: 3/27/00 
Size: 303KB 
Description: Newest Flash BIOS for S381-M/ML/M+ Mainboards. This is a Self-Extracting File containing the newest Award Flash Utility as well as the BIOS file. 

Changes: 
・Support SCSI Controller Suspend To RAM 
・Fix when RTC resume enabled, system cannot suspend 
・Fix boot from SCSI and win98 shutdown to DOS failed 
・Update CPU micro-code 
・Change KEYBOARD 98 support 
・Fix PS/2 mouse missing during installation of WIN2000 if USBkey+PS/2 mouse --> Always report PS/2 keyboard exist if PS/2 mouse is plugged 
・Autodetect -5V input and disable the item if the -5V input is missing 
・Add legacy mouse emulation for USB mouse 
・If UDMA33 cable is used, UDMA66 and UDMA33 device are mixed on one cable, BIOS may detect the wrong cable configuration and use the UDMA66 speed. Add a item "Slow Down UDMA Mode" to fix this problem 
・View the complete README.TXT file for more Update Information. 
・NOTE: SYSTEM MAY HANG BEFORE BOOT: 1. If Jumper JP4 is set to Disabled (Pins 2-3), the system will hang on reboot. Either change this jumper to Enable (Pins 1-2) or Disable AC97 Sound in the BIOS. 
・NOTE FOR FREQUENCY CONTROL: 1. CPU host clock control: If you experience system hang BEFORE you can enter BIOS setup when you over-clocking the CPU host/PCI clock, power off system, then power-on the system, press INS key QUICKLY until system shows up, press DEL key to enter BIOS setup to correct the frequency control setting! 2. CPU clock multiplier ratio: If too large ratio is selected and system cannot start. ( Maybe cannot go into BIOS setup ) The ONLY method to get out of this situation is to CLEAR CMOS with jumper.