1	&Receive all except listed below
2	Tra&nsmit all except listed below
3	&Drop all except listed below
4	An error occured during dialog construction. A possible cause is lack of memory. Try closing some programs and try again.
5	Source Address
6	Source Mask
7	Destination Address
8	Destination Mask
9	Protocol
10	Source Port or Type
11	Destination Port or Code
12	TCP
13	UDP
14	ICMP
15	Any
16	Other
17	ICMP type:
18	ICMP code:
19	Source port:
20	Destination port:
21	IP port number
22	Please enter an IP address for the source.
23	Please enter a mask for the source address.
24	Please enter an IP addres for the destination.
25	Please enter a mask for the detination address.
26	Please enter a protocol number.
27	Your computer does not have sufficient memory to perform this operation. Try closing some other applications.
28	An error occured while saving the filter information. Please check to make sure your configuration is OK.
29	Source Network
30	Source Node
31	Source Socket
32	Destination Socket
33	Destination Network
34	Destination Node
35	Packet Type
36	Please enter a value for the network number.
37	Please enter a value for the network mask.
38	Please enter a value for the node.
39	Please enter a value for the socket.
40	Please enter a value for the packet type.
41	You have entered an invalid network number.
42	You have entered an invalid node number.
43	You have entered an invalid socket number.
44	You have entered an invalid packet type.
45	Please enter a valid network mask.
46	The network mask entered is not valid.\nThe source address cannot be more specific than the network mask.
47	The network mask entered is not valid.\nThe destination address cannot be more specific than the network mask.
48	Protocol
57344	Routing and Remote Access Administrator