AOpen 3D Navigator PA740 Windows NT 4.0 Video Device Driver Installation

****Installing your new PA740 Video Driver for Windows NT 4.0.****

1.  Start system with Windows NT 4.0 installed.
2.  IMPORTANT: When the "Please select the operating system to start..." message
    is displayed, select "Windows NT Workstation Version 4.00 [VGA mode]".
3.  From "Start", select the "Settings group", then click on the
    "Control Panel" icon.
4.  In the "Control Panel", double click on the "Display" icon.
5.  In the "Settings" screen, click on the "Display Type..." button.
6.  From the "Display Type" screen, and in the "Adapter Type" section, click
    on the "Change..." button.
7.  In the "Change Display" screen, click on the "Have Disk..." button.
8.  Insert the new display driver diskette into the A:\ drive, then click on
    the "OK" button.
9.  From the list of displayed AOpen devices, select your PA740 device.
10. From "Third-party Drivers", click on the "Yes" button to proceed.
11. If a message appears stating the driver is already installed on the
    system, and asks if you want to use the current or new drivers, be sure
        to select the "New" button.
12. If prompted for the driver diskette a second time, click on the
    "Continue" button.
13. When the message "The drivers were successfully installed" is displayed,
    remove the display driver diskette, then click on the "OK" button.
14. Back at the "Display Type" window, click on the "Close" button.
15. Back at the "Display Properties" window, click on the "Close" button.
16. When you see the "System Settings Change" window, asking if you wish to
    restart your computer, click on the "Yes" window to reboot now.

  For more info about our products, please visit our web site:

         http://www.aopen.com.tw
            
================================================================================
[Last Modified Date] 
       Mar 25,1999 by Michael Wong.