MKMSGF
	5	v	
!J!}!
"2#e#
$:$R$g$
%9&c&
'P'p'
(2(V(t(w(
)?)W)
+2+F+]+t+
,5,X,x,
-=-_-
fservice.msg
ECorrective Service Facility failed to start the session.
IPlease Wait...
ICorrective Service Facility
IExit Corrective Service Facility.
IServiceable products
ICorrective Service Facility Help
Please wait while the Corrective Service Facility prepares
the system for service.
Please wait while the Corrective Service Facility inspects
the system.
Please wait while the Corrective Service Facility is
performing commit.
IPlease wait while the Corrective Service Facility is
performing redirect.
IThe corrective service program will continue by
re-starting the system from drive A. Place boot diskette
in drive A. Shut down your system. Press and hold the Ctrl
and Alt keys; then press the Del key.
ICorrective service has been successfully applied.
ICorrective service has been successfully applied.
Remove the diskette from drive A.
Press and hold the Ctrl and Alt keys; then press the Del
key to restart the system.
IInitiating service on %1 at %2.
IArchiving for %1.
IArchiving completed successfully.
IBacking up for %1.
IBacking up completed successfully.
IApplying Service to products:
IBacking out %1 to Archive.
IBacking out %1 to Backup.
IBacking out completed successfully.
IRedirecting archive for %1
Ifrom %1
Ito %1.
IRedirecting completed successfully.
ICommitting %1 to level %2.
ICommit completed successfully.
IInsert a blank diskette in drive %1 to archive the
product %2
IInsert a blank diskette in drive %1 to back up the
product %2
IInsert the archive disk %1 for the product %2 in drive %3
IInsert the backup disk %1 for the product %2 in drive %3
IInsert the first archive disk for product %1 in drive %2
if there is an existing archive for this product level.
Otherwise cancel.
IRemove the diskette from drive %1.
IInsert %1 Diskette %2 into drive %3.
IDiskette %1 of %2
IStarting %1
ICopying %1
IUpdating %1
ISkipping %1
is already up to date. No update is necessary.
IFile %1 in %2 is locked.
ICorrective Service Boot
IStandard Edition
IExtended Edition
IVersion
IComponent ID
IService level
ICorrective Service
IUse the command prompt from a booted OS/2 Installation
diskette to free up the required space.
IFrom an OS/2 Command prompt, free up the required space.
Then select Retry to continue.
IPlease close the application and select Retry. If you are
unable to close the application, select Reboot to
continue service.
IProduct %1 (%2) will be updated from level %3 to level
IOne or more selected products need to be committed before
they can be serviced. Would you like to commit them now ?
As a result of commiting, the old archive would no longer
be compatible and new archive path may be automatically
generated.
IDirectories under %1 have been ignored because
the directory length exceeds the system maximum length.
IService
IRedirect
IBackout
ICommit
IArchive
ICancel
IHelp
IChange product list...
IOS/2 Corrective Service Level %1
All target fields must be filled prior to performing
redirect.
All archive fields must be filled prior to applying
service.
EDriver %1 in file %2 has been detected. Selecting 'Enter'
allows service to be applied and reset your video mode to
VGA. Refer to 'Installing Super VGA (SVGA) Support' in the
Readme.ins file on diskette 1, then reinstall your SVGA
video driver after the Service Pack installation is
complete.  Selecting Cancel will end the installation.
IPreprocessing %1
IAccessing the file %1 in archive.  Please wait...
IRecovery of %1 completed sucessfully.
IRecovery of %1 aborted by user.
IRecovery of %1 dated %2 failed because of pack mismatch.
IStart recovery of %1 interrupted on %2.
ILogfile %1 restored from backup.
IService %1 was interrupted on %2.
IDeferring service of %1.
IThis portion of service has completed.  Reboot your
system before applying additional service or using the product
to process files that were locked during service.
EA previous installation of service is still pending.
The system must be rebooted to allow the process to
complete before applying additional service.
IDeferring Backing out %1 to Archive.
IDeferring Backing out %1 to Backup.
I%1 %2
IDefault Directories used: %1
IExit routine %1 reported error %2.
IService has completed.  However, error information
has been logged in the Service log file.
See Service log file for additional information.
IPlease wait while the Corrective Service Facility verifies
that sufficient space is available on the system.
IRecombining %1.
ICreated directory %s.
IRemoved directory %s.
IRemoved file %s.
IDeferred removing directory %s.
IDeferred removing file %s.
IAttempt to remove directory %s was not successful.
ICopying backout exit (%s) to %s.
I  Command order is incorrect.
I  Invalid flag. Valid flags are: REPLACE_NEWER, REPLACE_PROTECTED, EXIT_WHEN_DONE.
I  The specified drive is not valid for the system.
I  :TARGET is required before :BACKOUT in a response file. You must specify either ":TARGET ARCHIVE" or ":TARGET BACKUP".
I  You may specify only one of the following actions in your response file: :BACKOUT, :REDIRECT, :COMMIT, :SERVICE.
I  The text is not a valid response file keyword.
I  You must specify a generic or fully-qualified archive path with the :ARCHIVE keyword.
I  You must specify a generic or fully-qualified archive path with the :BACKUP keyword.
I  The :VERSION specified in the response file is not compatible with this executable.  If the response file is the default, csf_sel.000, the version string is missing or incorrect.
I  The specified file or directory can not be found.
EGeneric error.
ECancelled transaction.
ECorrective Service Facility failed to initialize.
EFailed to create main window.
EHelp is not available.
EHelp has been disabled due to an error.
EA help error occurred.
EDrive %1 does not contain any directories with files to
update.
ENo products were found on the target system to service.
EIn order to begin service, at least one product must be
selected.
EAvailable memory is insufficient.
EA memory allocation error occurred.
Either end other running programs and select Retry or
select Exit to end the Corrective Service Facility.
EAn additional %1KB is needed on drive %2: to proceed with
service.
EFree up disk space on the drive and select Retry.
EThere is not enough space on disk %1 to continue.
ECould not execute %1.
EThe response file %1 was not found.
EThe response file %1 is invalid.
EAn error occurred while attempting to service the system.
EAn error occurred while inspecting the current system.
EAn error occurred while searching for files to update. The
reason may be old or corrupt CSF logfiles, CSF_SEL.000
file, or file system corruption. See README file for more
information.
EAn error occurred while reading from the
corrective service diskette.
EAn error occurred. The reason may be old or corrupt CSF
logfiles, CSF_SEL.000 file, or file system corruption.
See README file for  more information.
EAn error occurred while updating the syslevel files for
the system. The system levels have not been updated.
EAn error occurred while scanning drive %1 for
directories.
EConflicting targets specified for backout.
EThe specified file or directory path is invalid.
ESyntax error on line %1 of response file %2.
EThe response file %1  corresponds to an older version
of corrective service facility.
ENo target has been specified for backout.
ENo products (SYSLEVEL.??? files) were found to
update using the directory list on line %1 of response
file %2.
ENo valid directories were found to update for '%1' (%2)
on line %3 of response file %4.
EAn error occurred while completing user exit %1.
EThe response file %1 has no version information.
EFile %1 in %2 is an Access Control List protected file.
EThe path %1 does not exist or is invalid.
EThe maintenance directory %1 in the /T parameter is
invalid.
EChecksum Error(s) - exiting Service Facility
EChecksum Error in %1.
ECould not copy %1.
ERTPatch Failed for directory %1 file %2.
EError reading from drive %1
EAll files on the disk will be deleted
ESYSLEVEL of product and archive do not match. Cannot use
this archive.
EError updating the CONFIG.SYS to complete locked file
handling.  See SERVICE.LOG for files with deferred
service.
EArchive path is mandatory.
EEnter required archive path.
ESpecified archive path is invalid.
EArchive path is shared between mismatched product
instances.
EError opening or creating archive file.
EError reading the archive file.
EError writing the archive file.
EError seeking the archive file.
EError redirecting the archive file due to a mismatch in
archive contents or level.
EFile CRC mismatch during backout from archive.
ENo archive disk was provided.
ENo backup disk was provided.
ENo product has been selected.
ENo backup exists for this product.
ENo log file entry exists.
ENo archive file entry exists.
ENo product found with a backup.
ENo product found with an archive.
ENo product found to commit.
EFile CRC mismatch during backout from backup.
ESpecified backup path is invalid.
EBackup and archive path may not be shared.
EMismatch in logfile signature.
INo messages have been logged in %1.
ELog file is not open.
EError reading the log file. The reason may be old or
corrupt CSF logfiles. See README file for  more
information.
EError writing to the log file.
EError seeking the log file.
EError at end of log file.
EPlease shut down your system and reboot it to apply
service. Place the first disk of the CSD in the boot drive.
EError creating directory.
EInvalid Drive
EEnter or change optional backup path.
EEnter target path.
E (Archive)
E (Backup)
EBacked up products
EArchived products
EServiceable products
EUncommitted products
EDo you want to redisplay the Products List?
ELocked Files
Installation cannot proceed because the following files
are locked:
EError reading CDROM source file.
EFile %1 is now locked.
EA source drive must be selected.
ENo source drive is available.
EError opening the file %1.
EError reading the file %1.
EArchiving is disabled for the product %1.
EError packing the file %1.
EError unpacking the file %1.
ECould not open recovery file %1.
EError reading recovery file %1.
EError writing to recovery file %1.
EError rejoining large file %1.
EError large file %1 not rejoined correctly.
EError writing to file, %1.
ECould not load the needed entry from FILEFIX.DLL.
Any system files modified by ASD Features will not be included
in the CSF archive or backup.  If you have not installed any ASD
features, there will be no impact to your system.
IIf you have installed ASD features which updated files for
the selected products, your CSF archive and/or backup directories may
not contain the correct version of those files.
IIf you have installed ASD features which updated files for the
selected products,  product files updated by the ASD features may not
be at the expected level after the backout completes.
IIf you have installed ASD features which updated files for the
selected products, uninstalling the ASD feature may back level some
of the products' files.
IAnother application has locked a control file CSF needs. Please close all other applications so CSF can continue.
IWarning: Backing out %1 will affect the operation of ASD features.
IDo you want to continue?
IBackout will affect ASD Feature operation.
IAffected features:  %1