═══ 1. IBM DOS 7.0 APARs ═══ IBM DOS 7.0 APARs as of 4 Aug 1997 About OS2APARS... ═══ About OS2APARS... ═══ OS2APARS is produced by: Brent Allen - brenta@vnet.ibm.com IBM Personal Solutions Systems Center Westlake, Texas http://pscc.dfw.ibm.com Updates to these files may be found twice a month (usually) on the OS2APARS home page http://pscc.dfw.ibm.com/os2apars/ Updates are also available on a monthly basis on the Technical Connection Personal Software CDROM (http://pscc.dfw.ibm.com/info/techconn.html). ═══ 1.1. IR29074 - DISCOPY WILL ASK YOU TO INSERT A DISKETTE IN DRIVE E: IF THE A: DRIVE IS AUTO-MOUNTED. ═══ APAR Identifier ...... IR29074 Last Changed ........ 95/04/25 DISCOPY WILL ASK YOU TO INSERT A DISKETTE IN DRIVE E: IF THE A: DRIVE IS AUTO-MOUNTED. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/04/25 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: Diskcopy will give you an error "insert source diskette in drive E:" when doing a diskcopy a: a: if the A: drive is auto-mounted. LOCAL FIX: PROBLEM SUMMARY: Incorrect prompt when trying to diskcopy a stacked, automounted floppy drive. PROBLEM CONCLUSION: correct logic in diskcopy. TEMPORARY FIX: Unmount stacker drive COMMENTS: MODULES/MACROS: DISKCOPY SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.2. IR29139 - CODEPAGE 865 FAILS WITH NORWEGIAN KEYBOARD ID ═══ APAR Identifier ...... IR29139 Last Changed ........ 95/04/12 CODEPAGE 865 FAILS WITH NORWEGIAN KEYBOARD ID Symptom ...... AB ABEND Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/04/12 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: PC DOS 7 UK English Version Configured with codepage 865 and Norwegian keyboard id givesan invalid codepage error. Config.sys: country=047,865,c:\dos\country.sys device=c:\dos\display.sys con=(,,1) install=c:\dos\nlsfunc.exe c:\dos\country.sys Autoexec.bat: c:\dos\mode.com con cp prep=((865) c:\dos\865.cpi) c:\dos\mode.com con cp sel=865 c:\dos\keyb no,865,c:\dos\keyboard.sys /id:155 LOCAL FIX: PROBLEM SUMMARY: You cannot use the alternate code page 865 with country Norway. PROBLEM CONCLUSION: Correct logic error in keyboard.sys to allow a second code page for Norway. TEMPORARY FIX: COMMENTS: MODULES/MACROS: KEYBOARD SRLS: NONE RTN CODES: CIRCUMVENTION: Use code page 850.. MESSAGE TO SUBMITTER: ═══ 1.3. IR29147 - XDFCOPY WILL NOT RECOVER THE FREE SPACE ON A DRIVE. ═══ APAR Identifier ...... IR29147 Last Changed ........ 95/04/05 XDFCOPY WILL NOT RECOVER THE FREE SPACE ON A DRIVE. Symptom ...... AB PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/04/05 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: After doing an xdfcopy on a drive that does not have enough free space to store contents of one diskette.. You will loose all free space untill a chkdsk c: /f is run. LOCAL FIX: PROBLEM SUMMARY: XDFCOPY does not return disk clusters when a insufficient space problem is encountered with the hardfile. PROBLEM CONCLUSION: xdfcopy logic will be corrected. TEMPORARY FIX: COMMENTS: MODULES/MACROS: XDFCOPY SRLS: NONE RTN CODES: CIRCUMVENTION: clear at least 2 meg of disk space before doing copy... MESSAGE TO SUBMITTER: ═══ 1.4. IR29229 - WHEN SETTING THE TEMPFILENAME VARIABLE IN THE E.INI FILE TO A RAMDRIVE YOU WILL RECEIVE A SYNTAX ERROR. ═══ APAR Identifier ...... IR29229 Last Changed ........ 95/04/12 WHEN SETTING THE TEMPFILENAME VARIABLE IN THE E.INI FILE TO A RAMDRIVE YOU WILL RECEIVE A SYNTAX ERROR. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/04/12 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: When setting the TEMPFILENAME option in the E.INI to a ramdrive you will receive a syntax error on the TEMPFILENAME line in the E.INI file. LOCAL FIX: PROBLEM SUMMARY: System syntax error when the tmp file entry is pointing to a empty disk (ie d:\e.tmp where d is a newly created RAM disk). PROBLEM CONCLUSION: correct logic in e macro library. TEMPORARY FIX: COMMENTS: MODULES/MACROS: E.EX SRLS: NONE RTN CODES: CIRCUMVENTION: put a file on the disk the user wishes to use. MESSAGE TO SUBMITTER: ═══ 1.5. IR29337 - DISKCOMP GIVES INCORRECT OUTPUT ON A/B DRIVE WHEN C'S COMPRESSED ═══ APAR Identifier ...... IR29337 Last Changed ........ 95/05/19 DISKCOMP GIVES INCORRECT OUTPUT ON A/B DRIVE WHEN C'S COMPRESSED Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/05/19 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: When C drive is compressed and you type Diskcomp B: B:, you get the error: "You are attempting to DISKCOPY a STACKER compressed disk. Please unmount the diskette prior to copying by issuing a STACKER -(drive letter) command. Example: STACKER -a:" NOTE: B drive is not compressed. If you type diskcomp A: A: when A drive is compressed, you get the error: Press any key to continue. . . FIRST diskette bad or incompatible Compare process ended. Compare another diskette (Y/N) ? LOCAL FIX: PROBLEM SUMMARY: Correct Logic in Diskcomp module PROBLEM CONCLUSION: see above TEMPORARY FIX: Unmount floppy before issuing diskcomp.. COMMENTS: MODULES/MACROS: DISKCOMP SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.6. IR29359 - CREATE LAN ADMIN DIRECTORY WRONGLY DOCUMENTED ═══ APAR Identifier ...... IR29359 Last Changed ........ 95/05/17 CREATE LAN ADMIN DIRECTORY WRONGLY DOCUMENTED Symptom ...... IN INSTALL Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 95/05/17 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Point 3, note : if you use the cmd "setup /a /t:c:pcdos7" you will return to the command line with the help displayed. LOCAL FIX: Text to be changed into "setup /a /t:c:\pcdos7 /w" and all is OK PROBLEM SUMMARY: When using the LAN install process the user can not specify the desired path for DOS to be installed in. PROBLEM CONCLUSION: The documentation states the /T switch should be used as /t:c:pcdos7 as an example. The real syntax should be /t:c:\pcdos7. The documentation neglected to include the backslash character in the path. This causes the admin installation to default to the PCDOS7 directory instead of the directory specified by the user. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: S83G926000 RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.7. IR29416 - RAMBOOST WILL REMOVE THE COMMON SECTION IF HIMEM.SYS IS IN THE COMMON SECTION. ═══ APAR Identifier ...... IR29416 Last Changed ........ 95/05/17 RAMBOOST WILL REMOVE THE COMMON SECTION IF HIMEM.SYS IS IN THE COMMON SECTION. Symptom ...... IN PCDOSAPAR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 95/05/17 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: If himem.sys is the common section of a multiple config.sys and you run ramsetup and let ramsetup reorganize the config.sys, ramboost will remove the common section. LOCAL FIX: PROBLEM SUMMARY: The documentation states that inorder to keep the COMMON section of the CONFIG.SYS when using RAMSETUP that the RAMSETUP.INI file needs the KEEPCOMMON flag set. It doesn't say where to put this in the INI file. It should be added by the user via a text editor after the CONFIG.SYS label in the RAMSETUP.INI file. The default for PC DOS 7 is to remove the COMMON section. PROBLEM CONCLUSION: See Problem description. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: S83G926000 RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.8. IR29443 - USING XDFCOPY WITHA WRITE PROTECTED DESTINATION DISK WILL GIVE AN TRACK 0 CANNOT BE FORMATTED INSTEAD OF WRITE PROTECTED DISKET ═══ APAR Identifier ...... IR29443 Last Changed ........ 95/05/09 USING XDFCOPY WITHA WRITE PROTECTED DESTINATION DISK WILL GIVE AN TRACK 0 CANNOT BE FORMATTED INSTEAD OF WRITE PROTECTED DISKET Symptom ...... IN PCDOSAPAR Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 95/05/09 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When doing an XDFCOPY with a write protected destination diskette you will receive an error: "Track 0 cannot be formatted" Action:retry the operation or retry another diskette. . LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: A error message change will be considered if a future release of DOS is undertaken. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ SECTION IF HIM ═══ ═══ DISK WILL GIVE AN TRACK 0 CANNOT BE FORMATTED INSTEAD OF WRITE PROTECTED DISKET} ═══ APAR Identifier ...... IR29443 Last Changed ........ 95/05/09 USING XDFCOPY WITHA WRITE PROTECTED DESTINATION DISK WILL GIVE AN TRACK 0 CANNOT BE FORMATTED INSTEAD OF WRITE PROTECTED DISKET Symptom ...... IN PCDOSAPAR Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 95/05/09 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When doing an XDFCOPY with a write protected destination diskette you will receive an error: "Track 0 cannot be formatted" Action:retry the operation or retry another diskette. . LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: A error message change will be considered if a future release of DOS is undertaken. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ RATE=XX DELAY=XX ON SOME OEM MACHINE YOU W ILL RECEIVE A "FUNCTION NOT SUPPORTED ERROR".c ═══ ═══ WHEN USING THE FOR COMMAND IN A BATCH FILE SOME COMMANDS STILL W RITE TO THE SCREEN.K ═══ APAR Identifier ...... IR29447 Last Changed ........ 95/05/10 WHEN DOING A MODE CON RATE=XX DELAY=XX ON SOME OEM MACHINE YOU W ILL RECEIVE A "FUNCTION NOT SUPPORTED ERROR". Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 95/05/10 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: On some OEM machines you will receive a "function not supported" error when you do a mode con rate=xx delay=xx. LOCAL FIX: PROBLEM SUMMARY: MODE error on particular hardware types.. PROBLEM CONCLUSION: Alter logic in MODE to eliminate unnecessary tests.... TEMPORARY FIX: COMMENTS: MODULES/MACROS: MODE.COM SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ ILE SOME COMMANDS STILL W RITE TO THE SCREEN.K ═══ ═══ S ═══ APAR Identifier ...... IR29542 Last Changed ........ 95/05/22 WHEN USING THE FOR COMMAND IN A BATCH FILE SOME COMMANDS STILL W RITE TO THE SCREEN. Symptom ...... IN PCDOSAPAR Status ........... CLOSED SUG Severity ................... 2 Date Closed ......... 95/05/22 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When using the FOR command in a batch file, after performing a copy without the COPYCMD variable set in the Environment some commands will still write to the screen even if piped to a NUL after the first iteration of the loop. LOCAL FIX: Have the COPYCMD variable set in the environment. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: To work around this problem you must have the environment variable COPYCMD set. This problem only seems to occur right after an overwrite waringin has been issued. It does not occur with every commnand. Currently, PKZIP is the only known failing program. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ RTS THE INCORRECT UPPER MEMORY RESULTS.N ═══ APAR Identifier ...... IR30167 Last Changed ........ 95/08/23 LINEIN FUNCTION DOES NOT HANDLE END OF FILE MARKS CORRECTLY. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/08/23 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: The LINES() function will not give the correct output if the file was written in a word processor that saves the file in 128 character blocks with the last block filled with EOF (End Of File) marks. LOCAL FIX: PROBLEM SUMMARY: The LINEIN function of REXX will not give an accurate line count if the file has more than one end of file character (0x1A). PROBLEM CONCLUSION: Rexx program logic fixed. TEMPORARY FIX: None. COMMENTS: MODULES/MACROS: DOSFIO.C SRLS: NONE RTN CODES: CIRCUMVENTION: None MESSAGE TO SUBMITTER: ═══ G / DE-SELECTING ITEMS WITHIN DOS 7'S DOSSHELLY ═══ APAR Identifier ...... IR30177 Last Changed ........ 95/07/31 EMM386 REPORTS THE INCORRECT UPPER MEMORY RESULTS. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PRS Severity ................... 3 Date Closed ......... 95/07/31 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When booting up with EMM386.EXE loaded with /v (verbose) switch. Emm386 will report the correct Total Upper Memory Available and Largest Upper Memory Block Available. Then if you run emm386 again from the command line it will show the Total Upper Memory Available and the Largest Upper Memory Block Available as OKB. If you run a MEM it will give the correct Upper Memory Statistics. LOCAL FIX: PROBLEM SUMMARY: EMM386 displays erroneous expanded memory size. This problem occurs in IBM PC DOS 7.0, 6.3, and 6.1. Also MS-DOS 6.00. PROBLEM CONCLUSION: This is a permanent restriction with EMM386. Use the DOS MEM command to accuately display the expanded memory size. TEMPORARY FIX: None. COMMENTS: MODULES/MACROS: EMM386 SRLS: S83G930900 RTN CODES: CIRCUMVENTION: Use the MEM command to accurately display the size of expanded memory. MESSAGE TO SUBMITTER: ═══ DLE FILE COUNTS IF IT RUNS OUT OF CONVENTIONA L MEMORY.B ═══ APAR Identifier ...... IR30177 Last Changed ........ 95/07/31 EMM386 REPORTS THE INCORRECT UPPER MEMORY RESULTS. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PRS Severity ................... 3 Date Closed ......... 95/07/31 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When booting up with EMM386.EXE loaded with /v (verbose) switch. Emm386 will report the correct Total Upper Memory Available and Largest Upper Memory Block Available. Then if you run emm386 again from the command line it will show the Total Upper Memory Available and the Largest Upper Memory Block Available as OKB. If you run a MEM it will give the correct Upper Memory Statistics. LOCAL FIX: PROBLEM SUMMARY: EMM386 displays erroneous expanded memory size. This problem occurs in IBM PC DOS 7.0, 6.3, and 6.1. Also MS-DOS 6.00. PROBLEM CONCLUSION: This is a permanent restriction with EMM386. Use the DOS MEM command to accuately display the expanded memory size. TEMPORARY FIX: None. COMMENTS: MODULES/MACROS: EMM386 SRLS: S83G930900 RTN CODES: CIRCUMVENTION: Use the MEM command to accurately display the size of expanded memory. MESSAGE TO SUBMITTER: ═══ 547 - CANNOT PRINT TEXT FILES OFF A CD DISK VIA DOSSHELL.В ═══ APAR Identifier ...... IR30547 Last Changed ........ 95/09/21 CANNOT PRINT TEXT FILES OFF A CD DISK VIA DOSSHELL. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/09/21 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: You will get an access denied error when trying to print any text file off a cd disk via dosshell. LOCAL FIX: PROBLEM SUMMARY: Access denied when printing files from a CD ROM drive via DOSSHELL. PROBLEM CONCLUSION: DOSSHELL was fixed to handle CD ROM printing TEMPORARY FIX: Private DOSSHELL.EXE provided to APAR submitter. COMMENTS: MODULES/MACROS: NONE SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 565 - MOUSE /?, HELP MOUSE, AND HELP ON MOUSE.INI CONTENTS CONTRADICT EACH OTHER ON HARDWARE CURSOR FEATURE WITHIN DOS 7.a ═══ APAR Identifier ...... IR30547 Last Changed ........ 95/09/21 CANNOT PRINT TEXT FILES OFF A CD DISK VIA DOSSHELL. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/09/21 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: You will get an access denied error when trying to print any text file off a cd disk via dosshell. LOCAL FIX: PROBLEM SUMMARY: Access denied when printing files from a CD ROM drive via DOSSHELL. PROBLEM CONCLUSION: DOSSHELL was fixed to handle CD ROM printing TEMPORARY FIX: Private DOSSHELL.EXE provided to APAR submitter. COMMENTS: MODULES/MACROS: NONE SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... IR30565 Last Changed ........ 95/09/08 MOUSE /?, HELP MOUSE, AND HELP ON MOUSE.INI CONTENTS CONTRADICT EACH OTHER ON HARDWARE CURSOR FEATURE WITHIN DOS 7. Symptom ...... DD PCDOSAPAR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 95/09/08 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Mouse /?, Help Mouse, and Help on Mouse.ini contents contradict each other on hardware cursor feature within Dos 7. Mouse /? command says "hardware cursor /Y (use hardware cursor feature)" which implies it turns the hardware cursor feature on. Help Mouse command says "/y Specifies that the hardware cursor be turned off" which contradicts Mouse /? command. Help on Mouse.ini says "HardwareCursorSupport=TRUE, FALSE" for File Parameters and TRUE=DEFAULT for Possible Values which implies its defaulted to on. LOCAL FIX: PROBLEM SUMMARY: The on-line help for the MOUSE states that the /Y parameter is for turning the HARDWARE cursor off. This is incorrect it is to turn the HARDWARE support ON. OFF is the DEFAULT for the mouse. PROBLEM CONCLUSION: see above TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: ONLINEHELP RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ HELP ON MOUSE.INI CONTENTS CONTRADICT EACH OTHER ON HARDWARE CURSOR FEATURE WITHIN DOS 7.a ═══ ═══ 1.9. IR30565 - MOUSE /?, HELP MOUSE, AND HELP ON MOUSE.INI CONTENTS CONTRADICT EACH OTHER ON HARDWARE CURSOR FEATURE WITHIN DOS 7. ═══ APAR Identifier ...... IR30565 Last Changed ........ 95/09/08 MOUSE /?, HELP MOUSE, AND HELP ON MOUSE.INI CONTENTS CONTRADICT EACH OTHER ON HARDWARE CURSOR FEATURE WITHIN DOS 7. Symptom ...... DD PCDOSAPAR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 95/09/08 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Mouse /?, Help Mouse, and Help on Mouse.ini contents contradict each other on hardware cursor feature within Dos 7. Mouse /? command says "hardware cursor /Y (use hardware cursor feature)" which implies it turns the hardware cursor feature on. Help Mouse command says "/y Specifies that the hardware cursor be turned off" which contradicts Mouse /? command. Help on Mouse.ini says "HardwareCursorSupport=TRUE, FALSE" for File Parameters and TRUE=DEFAULT for Possible Values which implies its defaulted to on. LOCAL FIX: PROBLEM SUMMARY: The on-line help for the MOUSE states that the /Y parameter is for turning the HARDWARE cursor off. This is incorrect it is to turn the HARDWARE support ON. OFF is the DEFAULT for the mouse. PROBLEM CONCLUSION: see above TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: ONLINEHELP RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ MOUSE, AND HELP ON MOUSE.INI CONTENTS CONTRADICT EACH OTHER ON HARDWARE CURSOR FEATURE WITHIN DOS 7.a ═══ CONTRADICT is CONTRADICT it CONTRADICT its CONTRADICT Last CONTRADICT line CONTRADICT list CONTRADICT List CONTRADICT LOCAL CONTRADICT MACROS CONTRADICT MESSAGE CONTRADICT MODULES CONTRADICT MOUSE CONTRADICT mouse CONTRADICT Mouse CONTRADICT Name CONTRADICT Not CONTRADICT of CONTRADICT off CONTRADICT OFF CONTRADICT ON CONTRADICT on CONTRADICT ONLINEHELP CONTRADICT OP CONTRADICT OTHER CONTRADICT other CONTRADICT parameter CONTRADICT Parameters CONTRADICT Parent CONTRADICT PC CONTRADICT PCDOS CONTRADICT PCDOSAPAR CONTRADICT PE CONTRADICT Platform CONTRADICT Possible CONTRADICT PROBLEM CONTRADICT PTF CONTRADICT Release CONTRADICT Relief CONTRADICT Reported CONTRADICT RTN CONTRADICT says CONTRADICT SCP CONTRADICT defaulted CURSOR Y Date PCDOSAPAR DD cursor DEFAULT incorrect DESCRIPTION DESCRIPTION DOS Duplicate EACH EACH EACH EACH ERROR ERROR defaulted FALSE DESCRIPTION FALSE HardwareCursorSupport FALSE FALSE FALSE FALSE FALSE ERROR for FALSE for List hardware LOCAL hardware MACROS hardware MESSAGE hardware hardware HardwareCursorSupport INI CONCLUSION CONTENTS contents contradict CONTRADICT contradicts Current cursor CURSOR Date DD DEFAULT defaulted DESCRIPTION Detail DOC Dos DOS Duplicate each EACH ERROR FALSE feature FEATURE File FIX Fixed for HARDWARE hardware HardwareCursorSupport HELP Help help Identifier implies incorrect ini INI IR30565 is it its Last line = ? above AND and APAR Available be Changed Child MODULES Closed CIRCUMVENTION CLOSED CODES list " List ( , - ) LOCAL . MACROS / 0 08 09 569697200 command 3 7 700 = SUBMITTER help Fixed ini CIRCUMVENTION HARDWARE IR30565 Last CIRCUMVENTION Dos cursor Date CIRCUMVENTION FIX is FIX its PTF = Fixed FIX OFF PE Relief MOUSE Available Changed line Y mouse the HARDWARE EACH - CIRCUMVENTION DOC CIRCUMVENTION line 95 IR30565 Last DEFAULT FIX is FIX its Last CIRCUMVENTION Current CIRCUMVENTION IR30565 Last CURSOR DEFAULT CIRCUMVENTION Component CIRCUMVENTION its ONLINEHELP PC off Release ONLINEHELP on CIRCUMVENTION is PROBLEM PE on Relief ON Release CIRCUMVENTION FIX is FIX its PTF HARDWARE CONTRADICT hardware CONTRADICT HardwareCursorSupport CONTRADICT HELP CONTRADICT Help CONTRADICT help CONTRADICT Identifier CONTRADICT implies CONTRADICT incorrect CONTRADICT ini CONTRADICT INI CONTRADICT IR30565 CONTRADICT is CONTRADICT it CONTRADICT its CONTRADICT Last CONTRADICT line CONTRADICT list CONTRADICT List CONTRADICT LOCAL CONTRADICT MACROS CONTRADICT MESSAGE CONTRADICT MODULES CONTRADICT MOUSE CONTRADICT mouse CONTRADICT Mouse CONTRADICT Name CONTRADICT Not CONTRADICT of CONTRADICT off CONTRADICT OFF CONTRADICT ON CONTRADICT on CONTRADICT ONLINEHELP CONTRADICT OP CONTRADICT OTHER CONTRADICT other CONTRADICT parameter CONTRADICT Parameters CONTRADICT Parent CONTRADICT PC CONTRADICT PCDOS CONTRADICT PCDOSAPAR CONTRADICT PE CONTRADICT Platform CONTRADICT Possible CONTRADICT PROBLEM CONTRADICT PTF CONTRADICT Release CONTRADICT Relief CONTRADICT Reported CONTRADICT RTN CONTRADICT says CONTRADICT SCP CONTRADICT defaulted CURSOR Y Date PCDOSAPAR DD cursor DEFAULT incorrect DESCRIPTION DESCRIPTION DOS Duplicate EACH EACH EACH EACH ERROR ERROR defaulted FALSE DESCRIPTION FALSE HardwareCursorSupport FALSE FALSE FALSE FALSE FALSE ERROR for FALSE for List hardware LOCAL hardware MACROS hardware MESSAGE hardware hardware HardwareCursorSupport INI CONCLUSION CONTENTS contents contradict CONTRADICT contradicts Current cursor CURSOR Date DD DEFAULT ═══ .a ═══ APAR Identifier ...... IR30565 Last Changed ........ 95/09/08 MOUSE /?, HELP MOUSE, AND HELP ON MOUSE.INI CONTENTS CONTRADICT EACH OTHER ON HARDWARE CURSOR FEATURE WITHIN DOS 7. Symptom ...... DD PCDOSAPAR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 95/09/08 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Mouse /?, Help Mouse, and Help on Mouse.ini contents contradict each other on hardware cursor feature within Dos 7. Mouse /? command says "hardware cursor /Y (use hardware cursor feature)" which implies it turns the hardware cursor feature on. Help Mouse command says "/y Specifies that the hardware cursor be turned off" which contradicts Mouse /? command. Help on Mouse.ini says "HardwareCursorSupport=TRUE, FALSE" for File Parameters and TRUE=DEFAULT for Possible Values which implies its defaulted to on. LOCAL FIX: PROBLEM SUMMARY: The on-line help for the MOUSE states that the /Y parameter is for turning the HARDWARE cursor off. This is incorrect it is to turn the HARDWARE support ON. OFF is the DEFAULT for the mouse. PROBLEM CONCLUSION: see above TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: ONLINEHELP RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ ISE AND A ND THE BITWISE OR7 ═══ ═══ EБ ═══ APAR Identifier ...... IR30656 Last Changed ........ 95/09/22 ACALC IS GIVING AN INCOORECT OUTPUT WHEN USING THE BITWISE AND A ND THE BITWISE OR Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 95/09/22 Component .......... 569697200 Duplicate of ......... Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: Acalc will give the incorrect output when using the bitwise AND (&) and the bitwise OR (:) in a calculation.. example: 5:2 =1 (should be 7) 5&2 =1 (should be 0) LOCAL FIX: PROBLEM SUMMARY: ACALC bitwise operators & (and) and | (or) do not work correctly. PROBLEM CONCLUSION: Fixed ACALC component. TEMPORARY FIX: None. COMMENTS: MODULES/MACROS: ACALC SRLS: NONE RTN CODES: CIRCUMVENTION: NONE MESSAGE TO SUBMITTER: ═══ TH INDUSTRY-STANDARD SYNTAXK ═══ APAR Identifier ...... IR32187 Last Changed ........ 96/04/30 CHKDSK INCORRECT YEAR FOR CONVERTED FILE Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 96/04/30 Component .......... 569697200 Duplicate of ........ Reported Release ......... 700 Fixed Release ............ 999 Component Name PCDOS 7.0 OP SY Special Notice Current Target Date .. Flags SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 700 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: When running chkdsk and an error is converted to a file, the month and day is correct but the year is set to 1980. If you increase your system date by a year and repeat the above steps the year of the file is 1981. LOCAL FIX: PROBLEM SUMMARY: When CHKDSK writes allocation errors to a file the files date is 1980 rather than the real year. PROBLEM CONCLUSION: This is a problem that surfaced when the year became 1996. CHKDSK did not fail until the year 1996 or greater was encountered. TEMPORARY FIX: none COMMENTS: MODULES/MACROS: CHKDSK SRLS: NONE RTN CODES: CIRCUMVENTION: None. MESSAGE TO SUBMITTER: ═══ IND WINDOWS ON A OS/2 FOR WINDOWS SYSTEMC ═══ APAR Identifier ...... IR26089 Last Changed ........ 94/05/11 DOS INSTALL CANNOT FIND WINDOWS ON A OS/2 FOR WINDOWS SYSTEM Symptom ...... IN PCDOS 6.X SE Status ........... CLOSED SUG Severity ................... 2 Date Closed ......... 94/05/11 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: scenario: customer has a system with dos/windows/os2 for windows, problem: when installing dos 6.1 or 6.3 dos install cannot locate the windows directory, therefore not allowing a customer to install the windows utilities such as, cpbackup for windows and antivirus for windows, this is assuming that a previous version of dos and winos2 is already on the system LOCAL FIX: temporary fix: have customer rename the winos2.exe file and this should allow dos install to recognize windows on the system, if this temp fix is not applied, dos install does not recognize that windows is on the system. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: Suggestion will be considered for a future release of DOS.. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.9.0.0.0.0.0.0.0.0.0.0.0.1. - DOS INSTALL CANNOT FIND WINDOWS ON A OS/2 FOR WINDOWS SYSTEMC ═══ APAR Identifier ...... IR26089 Last Changed ........ 94/05/11 DOS INSTALL CANNOT FIND WINDOWS ON A OS/2 FOR WINDOWS SYSTEM Symptom ...... IN PCDOS 6.X SE Status ........... CLOSED SUG Severity ................... 2 Date Closed ......... 94/05/11 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: scenario: customer has a system with dos/windows/os2 for windows, problem: when installing dos 6.1 or 6.3 dos install cannot locate the windows directory, therefore not allowing a customer to install the windows utilities such as, cpbackup for windows and antivirus for windows, this is assuming that a previous version of dos and winos2 is already on the system LOCAL FIX: temporary fix: have customer rename the winos2.exe file and this should allow dos install to recognize windows on the system, if this temp fix is not applied, dos install does not recognize that windows is on the system. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: Suggestion will be considered for a future release of DOS.. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ PROTECTED VOLUME ERROR.F ═══ APAR Identifier ...... IR26089 Last Changed ........ 94/05/11 DOS INSTALL CANNOT FIND WINDOWS ON A OS/2 FOR WINDOWS SYSTEM Symptom ...... IN PCDOS 6.X SE Status ........... CLOSED SUG Severity ................... 2 Date Closed ......... 94/05/11 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: scenario: customer has a system with dos/windows/os2 for windows, problem: when installing dos 6.1 or 6.3 dos install cannot locate the windows directory, therefore not allowing a customer to install the windows utilities such as, cpbackup for windows and antivirus for windows, this is assuming that a previous version of dos and winos2 is already on the system LOCAL FIX: temporary fix: have customer rename the winos2.exe file and this should allow dos install to recognize windows on the system, if this temp fix is not applied, dos install does not recognize that windows is on the system. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: Suggestion will be considered for a future release of DOS.. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ CORRECT VERSION OF DBLSPACE.BIN AFTER LOADING DOS 6.37 ═══ APAR Identifier ...... IR26262 Last Changed ........ 94/05/18 INCORRECT VERSION OF DBLSPACE.BIN AFTER LOADING DOS 6.3 Symptom ...... IN PCDOSAPAR Status ........... CLOSED CAN Severity ................... 3 Date Closed ......... 94/05/18 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: If you install IBM Dos 6.3 over MS Dos 6.2 and 1. dblspace.bin from MS exists in the root directory and 2. You do not answer yes to install IBM Dos 6.3 compression, then you will get an error after 6.3 installs stating "You are loading the Incorrect Version of Dblspace.bin for this version of MS-Dos..." NOTE: If you answer yes for compression install in 6.3, then 6.3 will successfully update dblspace.bin within root 'c:\' LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: The message listed is supplied by the MS DblSpace driver. We state our compatibility with the driver in our PC DOS 6.1 Data Compression Guide on page 20. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ TED VOLUME E ═══ ═══ ILS WHEN INSTALLED FROM EXTERNAL 5.25 DRIVE.O ═══ APAR Identifier ...... IR26621 Last Changed ........ 94/07/25 DOS 6.3 SETUP FAILS WHEN INSTALLED FROM EXTERNAL 5.25 DRIVE. Symptom ...... IN PCDOSAPAR Status ........... CLOSED CAN Severity ................... 3 Date Closed ......... 94/07/25 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Insert Dos 6.3 install disk #1 in an External 5.25 HD drive and type SETUP. (5.25 requires $FDD5.SYS) Press Enter at the welcome screen, keyboard/country screen, tools screen, and backup screen. After the initial dos files have been deleted, SETUP will attempt to read files from the diskette. SETUP will then pop up a box prompting the user to insert install diskette #1, which is already in the drive. Setup is now stuck in a loop. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: The driver $FDD5.SYS does not support some of the bios int 13 functions which is why setup does not function correctly. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.9.0.0.0.1. 5 DRIVE.O ═══ APAR Identifier ...... IR26621 Last Changed ........ 94/07/25 DOS 6.3 SETUP FAILS WHEN INSTALLED FROM EXTERNAL 5.25 DRIVE. Symptom ...... IN PCDOSAPAR Status ........... CLOSED CAN Severity ................... 3 Date Closed ......... 94/07/25 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Insert Dos 6.3 install disk #1 in an External 5.25 HD drive and type SETUP. (5.25 requires $FDD5.SYS) Press Enter at the welcome screen, keyboard/country screen, tools screen, and backup screen. After the initial dos files have been deleted, SETUP will attempt to read files from the diskette. SETUP will then pop up a box prompting the user to insert install diskette #1, which is already in the drive. Setup is now stuck in a loop. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: The driver $FDD5.SYS does not support some of the bios int 13 functions which is why setup does not function correctly. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.9.0.0.0.1.0.0.0.0.1. IR26621 - DOS 6.3 SETUP FAILS WHEN INSTALLED FROM EXTERNAL 5.25 DRIVE.O ═══ ═══ LEq ═══ APAR Identifier ...... IR26672 Last Changed ........ 94/08/10 INCORRECT OUTPUT WHEN COMPARING A C SOURCE FILE TO ANOTHER FILE Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/08/10 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ 999 Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 630 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: When comparing a C language source file (*.c) with any other file using the dos FC command the output of the C file is corrupted. LOCAL FIX: PROBLEM SUMMARY: When using FC to compare a 'C' source file with an invalid statement using %s, the output is incorrect. PROBLEM CONCLUSION: FC uses its own printf routine, needed to account for a string that should not be processed but just displayed. TEMPORARY FIX: There is no workaround for this. COMMENTS: None MODULES/MACROS: FC SRLS: NONE RTN CODES: CIRCUMVENTION: There is no circumvention. MESSAGE TO SUBMITTER: ═══ OF UNDELETE DOES NOT UPDATE AUTOEXEC.BAT FILE, EVEN THOUGH IT REPORTS CHANGING IT.] ═══ APAR Identifier ...... IR26866 Last Changed ........ 94/09/14 WINDOWS VERSION OF UNDELETE DOES NOT UPDATE AUTOEXEC.BAT FILE, EVEN THOUGH IT REPORTS CHANGING IT. Symptom ...... IN PCDOSAPAR Status ........... CLOSED USE Severity ................... 3 Date Closed ......... 94/09/14 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Datamon needs to be loaded in the autoexec.bat. Enter windows and run windows undelete. Select options. Select Configure Delete Protection. Change the protection. The file autoexec.bat will be reported as changed and to re-boot. The file is never changed. LOCAL FIX: Manually update the Datamon entry in the autoexec.bat file. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: The user had Windows files set for 32 bit. Undelete dose not work with this setting... MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ EVEN THOUGH IT REPORTS CHANGING IT.] ═══ ═══ UP ON WARM BOOT.L ═══ APAR Identifier ...... IR27084 Last Changed ........ 94/08/18 PCMSCD LOADED ON A THINKPAD 750P CAUSES A 4101 HARDWARE ERROR UP ON WARM BOOT. Symptom ...... MC PCDOSAPAR Status ........... CLOSED CAN Severity ................... 3 Date Closed ......... 94/08/18 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When the pcmscd driver is loaded into memory on a Thinkpad 750P a 4101 Hardware Error (LED connection loose) is received upon warm boot. LOCAL FIX: None. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: The latest drivers resolved this problem. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ E., ═══ APAR Identifier ...... IR27084 Last Changed ........ 94/08/18 PCMSCD LOADED ON A THINKPAD 750P CAUSES A 4101 HARDWARE ERROR UP ON WARM BOOT. Symptom ...... MC PCDOSAPAR Status ........... CLOSED CAN Severity ................... 3 Date Closed ......... 94/08/18 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When the pcmscd driver is loaded into memory on a Thinkpad 750P a 4101 Hardware Error (LED connection loose) is received upon warm boot. LOCAL FIX: None. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: The latest drivers resolved this problem. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ E COMMAND OUTPUT INCORRECTH! ═══ ═══ ! ═══ APAR Identifier ...... IR27254 Last Changed ........ 94/09/03 QCONFIG REPORTS A 2.88 DRIVE AS A 5.25" 720K DISKETTE DRIVE. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/09/03 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ 999 Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 610 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: Qconfig in dos 6.3 reports a Teac 2.88 drive as a 5.25" - 720k - 80 Track - Type 5 diskette drive. LOCAL FIX: PROBLEM SUMMARY: With a returned type of 5, the message printed was invalid for the type of drive in the system. PROBLEM CONCLUSION: Fixed the message being returned. TEMPORARY FIX: Some drives return with a type of 5 - this would print the 5.25 disk message. There is no temporary workaround for this. COMMENTS: None MODULES/MACROS: QCONFIG SRLS: NONE RTN CODES: CIRCUMVENTION: NONE MESSAGE TO SUBMITTER: APAR Identifier ...... IR27358 Last Changed ........ 94/11/21 DATE COMMAND OUTPUT INCORRECT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 2 Date Closed ......... 94/11/21 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: even if data changed from current date to 2000,when system IPL or CLEAN IPL,data reset to 1980-01-04. recreation step 1.change the data "1999-12-31 23:59:30" 2.passed 30 scond, then confirmed changed date by date command 3.system IPL or CLEAN IPL( during BAT sequence press PF5) 4.check again date. you can see "1980-01-01" LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: The system REAL TIME CLOCK cannot increment across the century. This is a hardware limitation of the RTC. The user of a current DOS release 6.x and all prior releases will have to update the Date/Time after powering on after the century changes from 1999 to 2000 if the same chip is sued for the RTC. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ NOCHROME MONITOR.c" ═══ APAR Identifier ...... IR27358 Last Changed ........ 94/11/21 DATE COMMAND OUTPUT INCORRECT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 2 Date Closed ......... 94/11/21 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: even if data changed from current date to 2000,when system IPL or CLEAN IPL,data reset to 1980-01-04. recreation step 1.change the data "1999-12-31 23:59:30" 2.passed 30 scond, then confirmed changed date by date command 3.system IPL or CLEAN IPL( during BAT sequence press PF5) 4.check again date. you can see "1980-01-01" LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: The system REAL TIME CLOCK cannot increment across the century. This is a hardware limitation of the RTC. The user of a current DOS release 6.x and all prior releases will have to update the Date/Time after powering on after the century changes from 1999 to 2000 if the same chip is sued for the RTC. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... IR27493 Last Changed ........ 94/10/13 E EDITOR FAILS WITH A COMPUTER WITH A MONOCHROME MONITOR. Symptom ...... AB PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/10/13 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ 999 Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 630 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: When trying to save or exit a file using the E editor on a XT computer with a monochrome monitor. The system locks up with a cursor flashing in the upper left hand corner. LOCAL FIX: PROBLEM SUMMARY: NONe PROBLEM CONCLUSION: none TEMPORARY FIX: None - for a monochrome monitor. COMMENTS: none MODULES/MACROS: E SRLS: NONE RTN CODES: CIRCUMVENTION: none MESSAGE TO SUBMITTER: ═══ 1.9.0.0.0.1.1. " ═══ APAR Identifier ...... IR27493 Last Changed ........ 94/10/13 E EDITOR FAILS WITH A COMPUTER WITH A MONOCHROME MONITOR. Symptom ...... AB PCDOSAPAR Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/10/13 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ 999 Component Name DOS OP SYSTEM Special Types .... Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 630 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: When trying to save or exit a file using the E editor on a XT computer with a monochrome monitor. The system locks up with a cursor flashing in the upper left hand corner. LOCAL FIX: PROBLEM SUMMARY: NONe PROBLEM CONCLUSION: none TEMPORARY FIX: None - for a monochrome monitor. COMMENTS: none MODULES/MACROS: E SRLS: NONE RTN CODES: CIRCUMVENTION: none MESSAGE TO SUBMITTER: ═══ PRINT SCREEN.Р# ═══ ═══ , GENERATES FILE UDEOFF IN ROOT DIRECTORY, INSTEAD OF INCLUDING IT IN THE COMPRESSED OUTPUT FILE]$ ═══ APAR Identifier ...... IR28176 Last Changed ........ 94/12/14 GRAPHICS PROGRAM DROPS SYSTEM WITH WSF (PCSUPPORT) WHEN CUSTOMER PRESS PRINT SCREEN. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/12/14 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ 999 Component Name DOS OP SYSTEM Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Release 630 : PTF not available yet Parent APAR: Child APAR list: ERROR DESCRIPTION: Problem resides in GRAPHICS.COM program since IBM DOS 6.1. Problem doesn't occur with previous IBM DOS 5.0 GRAPHICS.COM pro The problem is that this program is not saving/restoring our (WS registers like DS (it restores 0000x instead of our valid data s then WSF fails when refering to a value on this segment, after t PRTSCR function has been processed (INT5). Many other programs or application such as WSF may fail in the f I would like you to search for a contact in Boca Raton that coul look into this problem in order to fix it. LOCAL FIX: PROBLEM SUMMARY: Graphics.com destroys the DS register on a print screen call. This assumes that the program in question hooks INT 5. PROBLEM CONCLUSION: Fix logic in graphics.com TEMPORARY FIX: none COMMENTS: MODULES/MACROS: GRAPHICS SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ COMPRESSED OUTPUT FILE]$ ═══ ═══ TING A DISK WITH DATA.Б% ═══ APAR Identifier ...... IR30550 Last Changed ........ 95/09/07 CPBACKUP FOR WINDOWS DOES NOT PROMPT USER BEFORE OVERWRITING A DISK WITH DATA. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PRS Severity ................... 3 Date Closed ......... 95/09/07 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: CPBackup for Windows does not prompt user before overwriting disk with data even though Overwrite Warning option is selected. LOCAL FIX: PROBLEM SUMMARY: When "Overwrite Warning" is selected in Central Point Backup it still overwrites the diskette without prompting the user. PROBLEM CONCLUSION: This is a active problem and will be fixed if a future release of the product is made. TEMPORARY FIX: None. COMMENTS: MODULES/MACROS: NONE SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ S2APARS...A' ═══ APAR Identifier ...... IR30550 Last Changed ........ 95/09/07 CPBACKUP FOR WINDOWS DOES NOT PROMPT USER BEFORE OVERWRITING A DISK WITH DATA. Symptom ...... IN PCDOSAPAR Status ........... CLOSED PRS Severity ................... 3 Date Closed ......... 95/09/07 Component .......... 569655600 Duplicate of ......... Reported Release ......... 630 Fixed Release ............ Component Name DOS OP SYSTEM Special Types .. Current Target Date .. Type of Relief ..Not Available SCP ................... PC/DOS Platform ............ DOS Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: CPBackup for Windows does not prompt user before overwriting disk with data even though Overwrite Warning option is selected. LOCAL FIX: PROBLEM SUMMARY: When "Overwrite Warning" is selected in Central Point Backup it still overwrites the diskette without prompting the user. PROBLEM CONCLUSION: This is a active problem and will be fixed if a future release of the product is made. TEMPORARY FIX: None. COMMENTS: MODULES/MACROS: NONE SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ A CF SYSTEM (COUNTRY 2), DOSSHELL REFUSES "\" ENTRY IN PROGRA M PROPERTIES MENUА) ═══ IBMDOS6 . 1APARsasof4Aug1997 AboutOS2APARS . . . 1...IBM...........1........... OS2APARSisproducedby : BrentAllen-brenta @ vnet . ibm . com IBMPersonalSolutionsSystemsCenter Westlake ,Texas http : / / pscc . dfw . ibm . com Updatestothesefilesmaybefoundtwiceamonth( usually )ontheOS2APARShomepage http : / / pscc . dfw . ibm . com / os2apars / UpdatesarealsoavailableonamonthlybasisontheTechnicalConnectionPersonalSoftwareCDROM( http : / / pscc . dfw . ibm . com / info / techconn . html ) .(((((((((SolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionsSolutionstwiceTexasthetheseTechnicaltoUpdatesUpdatestwiceUpdatesPersonal(produced(pscc(Software(Solutions(Systems(techconn(Technical(Texas(the(these(to(twice(Updates(usually(vnet(Westlake((((((((((((((((((((((((((((((files(found(home(html(http(ibm(IBM(info(is((month(may(monthly(on((,(-(.(/(:((@(Allen(also(a((are((available(basis(be(Brent(by(os2apars(brenta(CDROM(Center(dfw)((maymayWestlakeTechnicalthemay ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══ ═══  ═══