no integer;
no strict 'refs';
which lasts until the end of that BLOCK.
Unlike the pragmas that effect the $^H hints variable, the use vars and use subs declarations are not BLOCK-scoped. They allow you to predeclare a variables or subroutines within a particular file rather than just a block. Such declarations are effective for the entire file for which they were declared. You cannot rescind them with no vars or no subs.
The following pragmas are defined (and have their own documentation).
To find out all the modules installed on your system, including those without documentation or outside the standard release, do this:
find `perl -e 'print "@INC"'` -name '*.pm' -printThey should all have their own documentation installed and accessible via your system man(1) command. If that fails, try the perldoc program.
Many popular C extension modules do not come bundled (at least, not completely) due to their sizes, volatility, or simply lack of time for adequate testing and configuration across the multitude of platforms on which Perl was beta-tested. You are encouraged to look for them in archie(1L), the Perl FAQ or Meta-FAQ, the WWW page, and even with their authors before randomly posting asking for their present condition and disposition.
The registered CPAN sites as of this writing include the following.
You should try to choose one close to you:
South Africa ftp://ftp.is.co.za/programming/perl/CPAN/
Hong Kong ftp://ftp.hkstar.com/pub/CPAN/
Japan ftp://ftp.jaist.ac.jp/pub/lang/perl/CPAN/
ftp://ftp.lab.kdd.co.jp/lang/perl/CPAN/
South Korea ftp://ftp.nuri.net/pub/CPAN/
Taiwan ftp://dongpo.math.ncu.edu.tw/perl/CPAN/
ftp://ftp.wownet.net/pub2/PERL/
Australia ftp://ftp.netinfo.com.au/pub/perl/CPAN/
New Zealand ftp://ftp.tekotago.ac.nz/pub/perl/CPAN/
Austria ftp://ftp.tuwien.ac.at/pub/languages/perl/CPAN/
Belgium ftp://ftp.kulnet.kuleuven.ac.be/pub/mirror/CPAN/
Czech Republic ftp://sunsite.mff.cuni.cz/Languages/Perl/CPAN/
Denmark ftp://sunsite.auc.dk/pub/languages/perl/CPAN/
Finland ftp://ftp.funet.fi/pub/languages/perl/CPAN/
France ftp://ftp.ibp.fr/pub/perl/CPAN/
ftp://ftp.pasteur.fr/pub/computing/unix/perl/CPAN/
Germany ftp://ftp.gmd.de/packages/CPAN/
ftp://ftp.leo.org/pub/comp/programming/languages/perl/CPAN/
ftp://ftp.mpi-sb.mpg.de/pub/perl/CPAN/
ftp://ftp.rz.ruhr-uni-bochum.de/pub/CPAN/
ftp://ftp.uni-erlangen.de/pub/source/Perl/CPAN/
ftp://ftp.uni-hamburg.de/pub/soft/lang/perl/CPAN/
Greece ftp://ftp.ntua.gr/pub/lang/perl/
Hungary ftp://ftp.kfki.hu/pub/packages/perl/CPAN/
Italy ftp://cis.utovrm.it/CPAN/
the Netherlands ftp://ftp.cs.ruu.nl/pub/PERL/CPAN/
ftp://ftp.EU.net/packages/cpan/
Norway ftp://ftp.uit.no/pub/languages/perl/cpan/
Poland ftp://ftp.pk.edu.pl/pub/lang/perl/CPAN/
ftp://sunsite.icm.edu.pl/pub/CPAN/
Portugal ftp://ftp.ci.uminho.pt/pub/lang/perl/
ftp://ftp.telepac.pt/pub/CPAN/
Russia ftp://ftp.sai.msu.su/pub/lang/perl/CPAN/
Slovenia ftp://ftp.arnes.si/software/perl/CPAN/
Spain ftp://ftp.etse.urv.es/pub/mirror/perl/
ftp://ftp.rediris.es/mirror/CPAN/
Sweden ftp://ftp.sunet.se/pub/lang/perl/CPAN/
UK ftp://ftp.demon.co.uk/pub/mirrors/perl/CPAN/
ftp://sunsite.doc.ic.ac.uk/packages/CPAN/
ftp://unix.hensa.ac.uk/mirrors/perl-CPAN/
Ontario ftp://ftp.utilis.com/public/CPAN/
ftp://enterprise.ic.gc.ca/pub/perl/CPAN/
Manitoba ftp://theory.uwinnipeg.ca/pub/CPAN/
California ftp://ftp.digital.com/pub/plan/perl/CPAN/
ftp://ftp.cdrom.com/pub/perl/CPAN/
Colorado ftp://ftp.cs.colorado.edu/pub/perl/CPAN/
Florida ftp://ftp.cis.ufl.edu/pub/perl/CPAN/
Illinois ftp://uiarchive.uiuc.edu/pub/lang/perl/CPAN/
Massachusetts ftp://ftp.iguide.com/pub/mirrors/packages/perl/CPAN/
New York ftp://ftp.rge.com/pub/languages/perl/
North Carolina ftp://ftp.duke.edu/pub/perl/
Oklahoma ftp://ftp.ou.edu/mirrors/CPAN/
Oregon http://www.perl.org/CPAN/
ftp://ftp.orst.edu/pub/packages/CPAN/
Pennsylvania ftp://ftp.epix.net/pub/languages/perl/
Texas ftp://ftp.sedl.org/pub/mirrors/CPAN/
ftp://ftp.metronet.com/pub/perl/
Chile ftp://sunsite.dcc.uchile.cl/pub/Lang/perl/CPAN/
For an up-to-date listing of CPAN sites, see http://www.perl.com/perl/CPAN or ftp://ftp.perl.com/perl/.
Perl implements a class using a package, but the presence of a package doesn't imply the presence of a class. A package is just a namespace. A class is a package that provides subroutines that can be used as methods. A method is just a subroutine that expects, as its first argument, either the name of a package (for ``static'' methods), or a reference to something (for ``virtual'' methods).
A module is a file that (by convention) provides a class of the same name (sans the .pm), plus an import method in that class that can be called to fetch exported symbols. This module may implement some of its methods by loading dynamic C or C++ objects, but that should be totally transparent to the user of the module. Likewise, the module might set up an AUTOLOAD function to slurp in subroutine definitions on demand, but this is also transparent. Only the .pm file is required to exist. See the perlsub manpage, the perltoot manpage, and the AutoLoader manpage for details about the AUTOLOAD mechanism.
If you are writing a module to expand an already existing set of
modules, please coordinate with the author of the package. It
helps if you follow the same naming scheme and module interaction
scheme as the original author.
sub new {
my $class = shift;
return bless {}, $class;
}
or even this if you'd like it to be used as either a static
or a virtual method.
sub new {
my $self = shift;
my $class = ref($self) || $self;
return bless {}, $class;
}
Pass arrays as references so more parameters can be added later
(it's also faster). Convert functions into methods where
appropriate. Split large methods into smaller more flexible ones.
Inherit methods from other modules if appropriate.
Avoid class name tests like: die "Invalid" unless ref $ref eq 'FOO'. Generally you can delete the ``eq 'FOO''' part with no harm at all. Let the objects look after themselves! Generally, avoid hard-wired class names as far as possible.
Avoid $r->Class::func() where using @ISA=qw(... Class ...) and $r->func() would work (see the perlbot manpage for more details).
Use autosplit so little used or newly added functions won't be a burden to programs which don't use them. Add test functions to the module after __END__ either using AutoSplit or by saying:
eval join('',<main::DATA>) || die $@ unless caller();
Does your module pass the `empty subclass' test? If you say
``@SUBCLASS::ISA = qw(YOURCLASS);'' your applications should be able
to use SUBCLASS in exactly the same way as YOURCLASS. For example,
does your application still work if you change: $obj = new YOURCLASS;
into: $obj = new SUBCLASS; ?
Avoid keeping any state information in your packages. It makes it difficult for multiple other packages to use yours. Keep state information in objects.
Always use -w. Try to use strict; (or use strict qw(...);).
Remember that you can add no strict qw(...); to individual blocks
of code which need less strictness. Always use -w. Always use -w!
Follow the guidelines in the perlstyle(1) manual.
Coding style is a matter of personal taste. Many people evolve their style over several years as they learn what helps them write and maintain good code. Here's one set of assorted suggestions that seem to be widely used by experienced developers:
Use underscores to separate words. It is generally easier to read $var_names_like_this than $VarNamesLikeThis, especially for non-native speakers of English. It's also a simple rule that works consistently with VAR_NAMES_LIKE_THIS.
Package/Module names are an exception to this rule. Perl informally reserves lowercase module names for `pragma' modules like integer and strict. Other modules normally begin with a capital letter and use mixed case with no underscores (need to be short and portable).
You may find it helpful to use letter case to indicate the scope or nature of a variable. For example:
$ALL_CAPS_HERE constants only (beware clashes with perl vars) $Some_Caps_Here package-wide global/static $no_caps_here function scope my() or local() variablesFunction and method names seem to work best as all lowercase. e.g., $obj->as_string().
You can use a leading underscore to indicate that a variable or
function should not be used outside the package that defined it.
Do NOT export anything else by default without a good reason!
Exports pollute the namespace of the module user. If you must export try to use @EXPORT_OK in preference to @EXPORT and avoid short or common names to reduce the risk of name clashes.
Generally anything not exported is still accessible from outside the module using the ModuleName::item_name (or $blessed_ref->method) syntax. By convention you can use a leading underscore on names to indicate informally that they are `internal' and not for public use.
(It is actually possible to get private functions by saying: my $subref = sub { ... }; &$subref;. But there's no way to call that directly as a method, because a method must have a name in the symbol table.)
As a general rule, if the module is trying to be object oriented
then export nothing. If it's just a collection of functions then
@EXPORT_OK anything but use @EXPORT with caution.
Having 57 modules all called Sort will not make life easy for anyone (though having 23 called Sort::Quick is only marginally better :-). Imagine someone trying to install your module alongside many others. If in any doubt ask for suggestions in comp.lang.perl.misc.
If you are developing a suite of related modules/classes it's good practice to use nested classes with a common prefix as this will avoid namespace clashes. For example: Xyz::Control, Xyz::View, Xyz::Model etc. Use the modules in this list as a naming guide.
If adding a new module to a set, follow the original author's standards for naming modules and the interface to methods in those modules.
To be portable each component of a module name should be limited to
11 characters. If it might be used on MS-DOS then try to ensure each is
unique in the first 8 characters. Nested modules make this easier.
The best way to know for sure, and pick up many helpful suggestions, is to ask someone who knows. Comp.lang.perl.misc is read by just about all the people who develop modules and it's the best place to ask.
All you need to do is post a short summary of the module, its purpose and interfaces. A few lines on each of the main methods is probably enough. (If you post the whole module it might be ignored by busy people - generally the very people you want to read it!)
Don't worry about posting if you can't say when the module will be
ready - just say so in the message. It might be worth inviting
others to help you, they may be able to complete it for you!
If the README file seems to be getting too large you may wish to
split out some of the sections into separate files: INSTALL,
Copying, ToDo etc.
Perl, for example, is supplied with two types of licence: The GNU GPL and The Artistic Licence (see the files README, Copying, and Artistic). Larry has good reasons for NOT just using the GNU GPL.
My personal recommendation, out of respect for Larry, Perl, and the perl community at large is to state something simply like:
Copyright (c) 1995 Your Name. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.This statement should at least appear in the README file. You may also wish to include it in a Copying file and your source files. Remember to include the other words in addition to the Copyright.
It may be handy to add a function or method to retrieve the number.
Use the number in announcements and archive file names when
releasing the module (ModuleName-1.02.tar.Z).
See perldoc ExtUtils::MakeMaker.pm for details.
If possible you should place the module into a major ftp archive and include details of its location in your announcement.
Some notes about ftp archives: Please use a long descriptive file name which includes the version number. Most incoming directories will not be readable/listable, i.e., you won't be able to see your file after uploading it. Remember to send your email notification message as soon as possible after uploading else your file may get deleted automatically. Allow time for the file to be processed and/or check the file has been processed before announcing its location.
FTP Archives for Perl Modules:
Follow the instructions and links on
http://franz.ww.tu-berlin.de/modulelistor upload to one of these sites:
ftp://franz.ww.tu-berlin.de/incoming ftp://ftp.cis.ufl.edu/incomingand notify <upload@franz.ww.tu-berlin.de>.
By using the WWW interface you can ask the Upload Server to mirror your modules from your ftp or WWW site into your own directory on CPAN!
Please remember to send me an updated entry for the Module list!
Being a mechanical process pl2pm is not bullet proof. The converted code will need careful checking, especially any package statements. Don't delete the original .pl file till the new .pm one works!
perl -e 'use Module::Name; method(@ARGV)' ...
or
perl -mModule::Name ... (in perl5.002 or higher)
The module and its user have a contract, part of which is common law, and part of which is ``written''. Part of the common law contract is that a module doesn't pollute any namespace it wasn't asked to. The written contract for the module (A.K.A. documentation) may make other provisions. But then you know when you use RedefineTheWorld that you're redefining the world and willing to take the consequences.