═══ 1. Master Server Window ═══

Each NetDoor/2 environment needs to have one server designated as the NetDoor/2 
Master Server. The Master server must be operational before any additional 
NetDoor/2 servers can be installed. 

If this server will be the Master, select that radio button. Otherwise, verify 
that the Master Server is operational and enter its name. The installation 
program will need to be able to communicate with the Master Server.  If 
communication is not possible, the installation will abort. 

Note:  NetDoor/2 servers that use the IBM LAN Server must be setup as Domain 
Controllers or as Backup Domain Controllers as described in the LAN Server 
documentation. 


═══ 1.1. Master Server name entry ═══

If this server is not the Master server, enter the name of the existing Master 
server in this entry field. The Master Server name is limited to 8 characters. 

The installation program will need to be able to communicate with the Master 
server before the installation can be completed. 


═══ 1.2. Master Server ═══

Select this choice if this system will be the NetDoor/2 Master Server. The 
Master Server is automatically both an image and a data server. 


═══ 2. Update Master Server Window ═══

This server must be defined in the NetDoor/2 environment at the Master Server 
for the installation to be successful. If this has not yet been done, take the 
time to do it now before continuing. 


═══ 3. Protocol Selection Dialog ═══

The Protocol Selection dialog allows you to select the allowable connection 
protocols that the server will support. You can choose to provide NetDoor/2 
service over more than one protocol, as long as the prerequisite software for 
each protocol has been installed on this server. To change protocol information 
at a later date, the NetDoor/2 installation must be run again. 


═══ 3.1. LAN Server protocol check box ═══

Check this box to provide NetDoor/2 via LAN Server. LAN Server must be 
installed on this system in order to make this selection. 


═══ 3.2. TCP/IP NFS protocol check box ═══

Check this box to provide NetDoor/2 via Network File Server (NFS). TCP/IP and 
the NFS daemon must be installed on this system in order to make this 
selection. 


═══ 3.3. Previous Button ═══

The Previous button will allow you to return to the previous entry panel to 
make corrections or verify your answers. 


═══ 3.4. Next Button ═══

The Next button saves your answers on this panel and allows you to proceed to 
the next panel. You will not be able to proceed if all required information is 
not completed. 


═══ 3.5. Exit Button ═══

The Exit button will allow you abort the installation. 


═══ 4. LAN Server Domain Controller Dialog ═══

This system is a LAN Server domain controller, so it will be set up to provide 
NetDoor/2 Data Services, which allows NetDoor/2 clients to access the 
environment. 

You may also elect to have this system provide a NetDoor/2 image. It is not 
recommended that domain controllers also provide the image if it will be 
servicing more than fifty users. 

If this system is not a domain controller and you are reading this panel, it is 
because this system is setup to be a backup domain controller. You will need to 
exit the installation and do the following: 

NET ACCOUNTS /ROLE:MEMBER 

Restart the installation and run it to completion. 

NET ACCOUNTS /ROLE:BACKUP 


═══ 4.1. NetDoor/2 Image Check Box ═══

Check this box to have this system provide a NetDoor/2 image along with 
NetDoor/2 data services. It is not recommended that domain controllers provide 
an image if it will be servicing more than 50 users. 


═══ 5. LAN Server Additional Server Dialog ═══

This system is a LAN Server additional server, so it will be set up to provide 
the NetDoor/2 image. 

The image is the collection of NetDoor/2 programs and files that are provided 
for use by the client systems. 


═══ 6. TCP/IP NetDoor/2 Server ═══

The TCP/IP NetDoor/2 Server can be configured to share a NetDoor/2 image, 
provide NetDoor/2 data services resource, or both. Note that at least one 
server of each type must exist in your environment. 

The NetDoor/2 image is the collection of NetDoor/2 programs and files that are 
provided for use by the client systems.  A NetDoor/2 TCP/IP server MUST have a 
NetDoor/2 image if it is also a LAN Server Additional Server.  You will be 
forced to install the image if this is the case. 

The data services resource is used by the client systems when they initialize. 
A NetDoor/2 TCP/IP server MUST have a data services resource if iti is also a 
LAN Server Additional Domain Controller.  You will be forced to install the 
data services resource is this is the case. 


═══ 6.1. NetDoor/2 data services check box ═══

The data services resource is used by the client systems when they initialize. 
A NetDoor/2 TCP/IP server MUST have a data services resource if iti is also a 
LAN Server Additional Domain Controller.  You will be forced to install the 
data services resource is this is the case. 


═══ 6.2. NetDoor/2 image check box ═══

The NetDoor/2 image is the collection of NetDoor/2 programs and files that are 
provided for use by the client systems.  A NetDoor/2 TCP/IP server MUST have a 
NetDoor/2 image if it is also a LAN Server Additional Server.  You will be 
forced to install the image if this is the case. 


═══ 7. NetDoor/2 Image Drive Specification Dialog ═══

You need to select the local drive where the files that comprise the NetDoor/2 
image will reside. There must be at least 30MB of free space on the drive 
chosen, but you should select a drive with more free space to allow room for 
customization and future expansion of the environment. 


═══ 7.1. NetDoor/2 Image Drive List ═══

All local drives in your system which have at least 30MB of disk space are 
listed. Select the one to use for the NetDoor/2 image. 


═══ 8. NetDoor/2 Data Services Drive Specification Dialog ═══

You need to select the local drive where the files that comprise the NetDoor/2 
data services resource will reside. The data services resource requires 1MB of 
disk space. 


═══ 8.1. NetDoor/2 Data Services Drive List ═══

All local drives in your system which have at least 1MB of disk space are 
listed. Select the one to use for the NetDoor/2 data services resource. 


═══ 9. Alias Name Window ═══

Enter the LAN Server alias name to identify the NetDoor/2 image on this system. 
The alias must be unique within the domain that this server is in, and can be 
no more than eight characters. 


═══ 9.1. Alias Name Entry Field ═══

Enter the LAN Server alias to identify the NetDoor/2 image on this system. An 
alias name is limited to 8 characters. 


═══ 10. Review Dialog - Install NetDoor/2 ═══

Review your selections and ensure they are correct. You can change the settings 
in the previous windows by pressing the previous button to return to the 
earlier panels. 

When you are satisfied with the answers, select the Install Button to begin the 
installation. 


═══ 10.1. Review Window ═══

Your answers to all of the installation questions are displayed. 


═══ 10.2. Install Button ═══

Press this button to begin the installation process. 


═══ 11. Review Dialog - Save response file ═══

Review your selections and ensure they are correct. You can change the settings 
in the previous windows by pressing the previous button to return to the 
earlier panels. 

When you are satisfied with the answers, select the Save Button to save the 
response file. 


═══ 11.1. Review Window ═══

Your answers to all of the installation questions required to build the 
response file are displayed. 


═══ 11.2. Save Button ═══

Press this button to save the response file. You will be allowed to select the 
directory and filename where the file will be stored. 


═══ 12. Enter IP Address Window ═══

When using the NFS access method, you may need to know the IP address as well 
as the IP name of data services servers or Master servers.  You only need to 
know the IP addresses of servers that are not resolved by IP name.  Your 
network administrator can help you if you do not know the IP address of a 
server. 

Enter the IP address for the specified server in the entry field provided.  IP 
addresses are in the form: 

xxx.xxx.xxx.xxx

For example: 

9.2.254.247

There are 4 fields in the IP address, and each field is separated by a period. 
Each number in each field must be in the range of 0-255. 

The IP name and IP address of unresolved servers will be added to the TCP/IP 
HOSTS file stored in your local \ETC subdirectory. 


═══ 13. Specify LAN Server ═══

When creating response files, it is impossible for the installation program to 
know the type of the LAN Server that you will be installing NetDoor/2 on.  For 
this reason, you are asked the type of LAN Server. 

If you have designated that you are installing a Master Server then you can 
only install on a Domain Controller or Backup Domain Controller.  In this case, 
the Additional Server radio button will be grayed out and not selectable.