MKMSGF
!>"v"
$J%U%`%k%v%
&&&1&<&r&
&4'y'
(\(g(r(}(
($)V)a)l)w)
)#*V*
+ +++6+A+L+W+b+m+
,<,z,},
,)-l-w-
-(.e.
/*///r/
0,0@0X0h0
1%1E1e1
2%2p2
2,3o3
414P4u4
525Y5
6;6k6
7F7q7
768r8
8,9d9
96:y:
;%<i<
<8=L=q=
esainst.msg
E RFIO program error: No more heap memory available for keywords.
E RFIO: Unable to open main response file %1.
E Response File syntax error on line %1 of file %2.
The bad line: %3
E RFIO: DOS I/O error occurred while reading response file.  rc = %1
E RFIO: Unable to open included response file %1
E RFIO Program error: Unexpected return code %1 from getnext routine.
E RFIO Program error:  No more heap memory available for list keywords.
E RFIO: Syntax error in file %2 near line %1.
The bad line: %3
E RFIO Program error:  General error scanning list.  rc = %1
E RFIO Program error: Unexpected return code %1 from listgetnext routine.
E Program %1 was called with the wrong number of parameters (%s)
E Unable to locate the response file %1
E Unable to locate the verb translation table %1
E Unable to locate the list item detail table %1
E I/O error reading the verb translation table %1
E I/O error reading the list item detail table %1
E I/O error reading the response file %1
E Unable to write to output file %1
E Program Error: out of heap memory near %1
E I/O error writing to output file %1
E Neither CMMODCFG or CMUSRCFG variables are in the environment.  One is requred.
E The path to the Install images was not specified in the environment.
W No working directory was specified in the environment. Using %1
E Unable to locate the Model Configuration %1
E Response file contains invalid value (%1) for keyword %1
W Response file contains wrong kind of value for keyword %1
E Program %1 started at %2.
E Program %1 ended at %2.  Highest return code was %3.
W Unrecognized Response File Keyword %1 encountered and ignored
E TblBld program error: Invalid table template received: %1
E TblBld program error: No more heap memory available
E TblBld: unable to open file %1
E TblBld: DOS i/o error occurred while reading file %1
E CM Configuration Update failed updating feature %1 record %2=%3, field %4.  See ESAINS7.LG.
E CM Configuration Update Verify of %1 failed.  See ESAINS7.LG.
E CM Configuration Update could not open configuration %1.  See ESAINS7.LG
E Could not process response file keyword %1.  No name was specified.
E ESA03: A bad command flag was found: %1
E ESA03: An unrecognized command line parameter was found: %1
E ESA03: I/O error writing to file.
W ESA03: A COPY keyword has a LIST value. It cannot be processed.
E ESA03: No more heap memory available.
E ESA03: Unable to open file %1 for output
E ESA03: Too many files have been opened.  Probable control file problem
W ESA03: A keyword not in the Control File has a list. %1 cannot be processed
E ESA03: No response file name was specified on the command line
E ESA03: No control file name was specified on the command line
E No /S (source) parameter was provided on the ESAINST command line
W A Logging flag in the form %1 was found on the ESAINST cmd line. L1-L4 are valid
W An unrecognized ESAINST command line parm was found: %1
E Unable to load command file %1.  Load return code was %2
E The /S (source) path (%1) does not exist or is not reachable
E No /R (response file) parameter was provided on the ESAINST command line
E The response file (%1) named does not exist or is not reachable
E The /G (general) path (%1) does not exist or is not reachable
E ESAINSTS was not able to create a working directory %1
E ESAINSTS was not able to locate the config.sys file %1
E ESAINSTS was not able to find a DLL (LIBPATH) path in file %1
E Current OS Version is %1.%2.  ESAINST requires Version 2.0 or higher
E A required file, %1, does not exist or is not reachable
E UNPACK error occurred for file %1
E Neither a model (CMModelCfg) nor a user (CMUserCfg) configuration file
was specified in the response file.  One or both is required.
W Response file keyword %1 had a bad value (%2).
The default value of %3 was assigned.
W The keyword DBModelCfg specified a file (%1) that does not exist.
The keyword will be ignored.
W ESAINSTS was not able to find file %1.
I Keyword %1 requested migration. Keyword %2 had incompatible value %3.
I Update Types indicated no processing requested, CMUpdateType=%1  DBUpdateType=%2.
E ESA10: A bad command flag was found: %1
E ESA10: An unrecognized command line parameter was found: %1
E ESA10: No SQLSYSTM file name was specified on the command line and in environment
E ESA10: Error in reading tuning parms from %1; Failed to migrate tuning parms
E ESA10: Error in reading workstation name from %1; Failed to migrate workstation name
E ESA10: Error in applying tuning parms to %1; Failed to migrate tuning parms
E ESA10: An unrecognized tuning parm variable was found: %1; might result in incomplete migration
E ESA10: Cannot open RSP file: %1; (RFOpen error)
E ESA10: Error in applying workstation name from %1; Failed to migrate workstation name
E No EE or ES Install history file was found.  Migration failed.
E ESA07V: Could not open configuration file %1
E ESA07V: Could not find a config name in environment variables %1 or %2
E ESA07V: Could not read header of configuration file %1
I ESA07V: Configuration file %1 was verified.
I ESA07v: Configuration file %1 was NOT verified.
E ESAINST: Database CommunicationsType %1 incompatible with Database Client source images.
ESABKUP:  is a utility to perform Backup and Recovery of files.
The syntax is:
      ESABKUP [path] [/B=file] [/C] [/D] [/L=file] [/R] [/W=drive] [/1] [/2]
[pathname] : any valid path on the system. Required, no default provided.
                  Example: D:\OS2\INSTALL
  Options  ** Only one option permitted per execution call **
    [/B=]  : backup (copy) "file"  file to "path" sub-directory.
    [/C]   : remove All sub-directories beneath and including "path".
    [/D]   : delete all files. A DosDelete file will be executed for each
             file in the sub-directory identified in the "path" parameter.
    [/L=]  : backup (copy) all files identified in "file" to "path"
             preserving the subdirectories and disk in which the files reside.
               File format:   \zzz\filename.ext  <--- drive from /W= parm.
               or           x:\zzz\filename.ext
    [/R]   : restore all files for directory tree from "path" parameter.
  Subcommands  ** permitted with any option **
    [/W=]  : Drive letter utilized by the "/L=" filespecs if not provided.
    [/1]   : Print OS/2 Commands (i.e; COPY, ERASE, etc.) to STDOUT instead
             of executing Dosxxx commands.
    [/2]   : Print Dosxxx API's to STDOUT while executing commands.
EESABKUP:   was unable to process a deep directory tree.
The output does not contain the entire directory list.
To correct this, manually delete subsets of the total directory tree.
EESABKUP:   %1 directories were encountered.
The output does not contain the entire tree list.
ESABKUP is limited to %2 total directories.
To correct this, manually delete subsets of the total directory tree.
Ireserved
EESABKUP:   Pathname parameter is required!
EESABKUP:   Error multiple options ... only single option allowed per execution!
EESABKUP:   RC (%1) in DosOpen .... of file (%2)
containing list of files to backup.
EESABKUP:   RC (%1) in DosRead .... of backup list file
(%2).
EESABKUP:   RC (%1) in DosMkDir ... while generating backup path
(%2).
EESABKUP:   RC (%1) in DosMkdir ... while generating file directory path
(%2).
WESABKUP:   RC (%1) in DosCopy .... of file (%2)
to backup directory (%3).
EESABKUP:   Error .. Entry (%1) within Backup file list
requires drive letter and no option /W= specified.
EESABKUP:   Error .. Restore ended due to no logical (i.e; #drive#) found in
(%1).
EESABKUP:   RC (%1) in DosCopy .... of file (%2)
to original directory (%3).
EESABKUP:   Error .. Failure in allocating space (%1).
EESABKUP:   Error .. Unable to access message file (%1).
EESABKUP:   RC (%1)  in DosDelete... of file (%2).
EESABKUP:   RC (%1). in DosRmDir.... of directory (%2).
EESABKUP:   Error .. (%1) files found in directory, to many for limit (%2).
EESABKUP:   Error .. in retrieving list of files from directory (%1) to restore.
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
EESAINSTS:  COMMAND FILE ERROR CONDITION ENCOUNTERED
 Error Type:   %1
 Line Number:  %2
 Instruction:  %3
EESAINSTS:  Drive (%1) has insufficient space (%2 bytes) for work directory, (%3 bytes needed).
ECHKSPACE:  Error .. Failure in allocating space.
IDrive (%1) has sufficient space (%2 bytes) for work directory, (%3 bytes needed).
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
EESA08:    Error .. ESA work directory (%1) invalid.
EESA08:    Error .. ACDI Redirection Feature requires NETBIOS Name.
EESA08:    Error .. Writing to file (%1) rc(%2).
EESA08:    Error .. Database Manager RDS option without Workstation Name.
EESA08:    Error .. Invalid Database Manager WorkStation Name (%1).
WESA08:    Warning  Query Manager requires Database Services to be installed.
WESA08:    Warning  Optional Tools requires Database Services to be installed.
IESA08:    Error .. Data Base Communications type (%1) is invalid.
Ireserved
Ireserved
Ireserved
Ireserved
EESA04:    Error .. No target specified.
EESA04:    Error .. No drive letter specified within target.
EESA04:    Error .. No source directory specified.
EESA04:    Error .. No work directory specified.
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
EESAUPDC:  Config.sys file specification parameter required.
EESAUPDC:  Unable to locate Config.sys file (%1).
EESAUPDC:  Cannot locate Master file (%1).
EESAUPDC:  Invalid option parameter (%1).
EESAUPDC:  Master file environment variable ESAUPDC_MASTER not found.
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
Ireserved
EESAPMRX: No /S (step) call parameter was provided.
EESAPMRX: No /R (rc  ) call parameter was provided.
EESAPMRX: No parameters where provided in call.
EESAPMRX: Unknown parameter (%1) provided in call.
EESAPMRX: Error accessing shared segment (rc=%1) parms=(%2).
IESACSTOP: Unable to stop Communications Manager rc=(%1).
IESACSTOP: Unable to stop Database Manager rc=(%1).
IESACSTOP: Terminating as... Stop parameter(%1) indicates.
I----> ESASTOP MESSAGES <-----------<--- control line  (not used)
Ireserved
I===============================================================
I ESAINST - Progress Meter control messages
I===============================================================
I00000    * <----timeout value in seconds (ie; 3600 = 1 hr)
IEXTD/2 Installation & Configuration
IStep:
Iprocessing.
IStarted at:
IDescription:
IPercent of TOTAL processing time
IProcessing started at:
IProcessing times out at:
ICurrent time:
I----Percentage and Desc----------  <--- control line  (not used)
I%  Activity Description            <--- control line  (not used)
I-- ----+----1----+----3----+----   <--- control line  (not used)
I 5 Response File Processing.
I15 Initialization.
I 6 Program Setup.
I 2 Backup processing.
I 0 User exit.
I 2 CM Cfg file upgrade.
I15 CM Prog. Configuration.
I 2 Installation Preparation.
I40 Installation Processing.
I 2 DBM tuning and migration.
I 6 Log Copies.
I 5 Completion Cleanup.
Ireserved for additional steps
Ireserved for additional steps
Ireserved for additional steps
Ireserved for additional steps
Ireserved for additional steps
Ireserved for additional steps
Ireserved for additional steps
Ireserved for additional steps
EESAINST:   Error .. Unable to access message file (%1) return code (%2).
EESAINST:   Error .. Return code (%1) retrieving message number (%2).
EESAINST:   Error .. Failure in allocating space (%1).
EESAINST:   Error .. (%1) steps defined, only (%2) allowed.
EESAINST:   Error .. allocating shared segment, return code (%1).
EESAINST:   Error .. return code (%1), processing DosExecpgm for (%2).
IStep Number:
IStep Description:
IReturn Code:
IProcessing ended SUCCESSFULLY at:
IProcessing ended in ERROR within:
IProcessing TIMED OUT within:
IUser Terminated processing within:
IEnded due to processing error at:
EESAINST:   Error ... unable to begin %1 thread.
I%1 ==== ESAINSTS: Step  1    - Response File Parsing
I%1 ==== ESAINSTS: Step  2    - Initialization
I%1 ==== ESAINSTS: Step  3    - Setup
I%1 ==== ESAINSTS: Step  4    - Backup
I%1 ==== ESAINSTS: Step  5    - User Exit
I%1 ==== ESAINSTS: Step  6    - CM Cfg Migration
I%1 ==== ESAINSTS: Step  7    - Modify CM Cfg
I%1 ==== ESAINSTS: Step  8    - Custom Build
I%1 ==== ESAINSTS: Step  9    - Custom Install
I%1 ==== ESAINSTS: Step 10    - DBM Configuration
I%1 ==== ESAINSTS: Step 10.5  - FFST
I%1 ==== ESAINSTS: Step 11    - Cleanup
I%1 ==== ESAINSTS: Step 12    - Log Copies
I%1 ==== ESAINSTS: Successful Ending rc(%2)
I%1 ==== ESAINSTS: Abnormal ending rc(%2)
EResponse file keyword %1 had a bad value (%2).
Processing was ended due to the critical nature of the keyword.
EESAINSTS: Error %1 requests migration when it has not been previously installed.
WESAINSTS: Unable to make %1 the default CM profile in %2.
ECHKSPACE: Could not open configuration file %1.
ECHKSPACE: Could not find a config name in environment variables %1 or %2.
ECHKSPACE: Could not read header of configuration file %1.
ECHKSPACE: No target drive provided for %1 processing.
ECHKSPACE: Insufficient space on drive %1 for Communications Manager installation.
ECHKSPACE: Database Communications type %1 invalid.
ECHKSPACE: Installation Image Source Path not available in environment.
ICHKSPACE: Drive %1 space (Kbytes) available = %2, required = %3.
ECHKSPACE: Insufficient space on drive %1 for requested installation.
ECHKSPACE: Error detected in Communications Manager size calculations.
ECHKSPACE: Error detected in Database Manager size calculations.
ECHKSPACE: Insufficient space on drive %1 for Database Manager installation.
EThe model configuration file %1 is not a valid CM configuration file
EThe model configuration file %1 is back version and can not be used
EThe model configuration file %1 is key-locked and can not be used
EA file needed to upgrade model file %1 could not be found. rc = %2
EThe model configuration file %1 had internal inconsistancies. rc = %2
EThe model configuration file %1 would not verify after upgrade.
WESASHELL started.
IESASHELL number of arguments (%1).
EESASHELL terminating program due to invalid argv[0].
EESAINSTS was unable to locate the current active CM configuration.
          Possible cause: no configuration was activated after last EE install.
E<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
          <<<<<< note.... the last entry in the file must be an <<<<<<
          <<<<<<          unreferenced entry                    <<<<<<
          <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<