#This file was created by <candide> Wed Jan 14 23:26:09 1998
#LyX 0.12 (C) 1995-1998 Matthias Ettrich and the LyX Team
\lyxformat 2.15
\textclass article
\language default
\inputencoding default
\fontscheme default
\graphics none
\paperfontsize 12
\spacing single 
\papersize letterpaper
\paperpackage a4
\use_geometry 0
\use_amsmath 0
\paperorientation portrait
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 0
\papersides 1
\paperpagestyle plain
\layout Title
How Do I - 
\layout Author
by the LyX Team
\layout Section
- read this document?
\layout Standard
The best way to navigate this file is by using the Table of Contents window.
 You can open this window by selecting 
\family sans 
Table
\protected_separator 
\protected_separator 
Contents
\family default 
 from the 
\family sans 
\family default 
 menu.
 This document is what most people would call an FAQ [stands for Frequently
 Asked Questions], though that description isn't entirely correct.
 Nobody's really doing the asking, and there are bound to be other questions
 that you, the user, will have.
 Instead, we hope to provide some sense of how to accomplish some of the
 most common tasks you need in document creation.
 This is often lacking in the manuals to other word processors.
 Sometimes, you don't want to be talked to like an idiot by a manual that
 assumes you have an IQ of 3, nor do you want to sift through an unordered,
 overly detailed reference manual.
 You just want a quick answer to the question, 
\begin_inset Quotes eld
\end_inset 
How do I do 
\emph on 
\emph default 
\begin_inset Quotes erd
\end_inset 
 even if that answer is, 
\begin_inset Quotes eld
\end_inset 
Not very easily.
\begin_inset Quotes erd
\end_inset 
 Giving you those quick answers is the purpose of this manual.
\layout Standard
As will all of the other manuals, this one uses the notation described in
 the 
\emph on 
Introduction to LyX\SpecialChar \@.
\layout Standard
For now, this document won't have much organization.
 There's just one nameless section, and each entry is in the form of a subsectio
 The subsections have NO order to them whatsoever, so you should use the
\family sans 
Table
\protected_separator 
\protected_separator 
Contents
\family default 
 window to get around.
 There's also another section, located at the end, which contains a few
 questions that couldn't be put in a 
\begin_inset Quotes eld
\end_inset 
How do I-
\begin_inset Quotes eld
\end_inset 
 form.
 This is more of a traditional FAQ\SpecialChar \@.
\layout Section
\protected_separator 
\layout Subsection
- insert more than one space?
\layout Standard
Depends on what you want to do with that extra space.
\layout Standard
If you're trying to put two spaces after a punctuation mark, don't worry.
 LyX can't display this, but LaTeX automatically puts 
\begin_inset Quotes eld
\end_inset 
a little extra
\begin_inset Quotes erd
\end_inset 
 space after certain punctuation marks, depending on the language.
 Exactly what is meant by 
\begin_inset Quotes eld
\end_inset 
a little extra
\begin_inset Quotes erd
\end_inset 
 changes from line to line.
 Remember - the spacing between words is variable in LyX!
\layout Standard
If you're trying to indent the first line of a paragraph, make sure you've
 set the default paragraph separation to 
\family sans 
Indent
\family default 
 in the 
\family sans 
Document
\protected_separator 
Layout
\family default 
 popup.
 Note that the first paragraph of a new section will never be indented [yes,
 it's annoying].
\layout Standard
If you're trying to mimic tab stops, don't.
 LyX automatically does indenting based on the paragraph style.
 There are also ways to right-justify text and add stretchable spaces.
 Check the 
\emph on 
User's guide
\emph default 
 for these topics:
\layout Itemize
Enumerated, Itemized, and Description Lists
\layout Itemize
Quote and Quotation Layouts
\layout Itemize
Verse Layouts
\layout Itemize
Right Address Layout
\layout Itemize
HFills
\layout Itemize
Protected Blanks
\layout Subsection
- insert extra blank lines?
\layout Standard
Depends on what you want to do with that extra blank line.
\layout Standard
If you're trying to make a heading for a chapter or section, you should
 use the appropriate paragraph layout.
 No need to reinvent the wheel, is there?
\layout Standard
If you want to make a title for your document, you should once again use
 the appropriate paragraph layout.
\layout Standard
If you actually need to alter the default paragraph spacing, change the
\emph on 
Spacing
\emph default 
 in the 
\emph on 
Document Layout
\emph default 
 popup.
 If you need to perform a one-time vertical spacing, use the 
\emph on 
Paragraph Layout
\emph default 
 popup.
 Also check the 
\emph on 
User's guide
\emph default 
 for these topics:
\layout Itemize
Chapter, Section, Subsection, and Subsubsection Layouts
\layout Itemize
Title, LaTeX Title, Author, and Date Layouts
\layout Itemize
Protected Newlines
\layout Subsection
- put a second paragraph on a list item?
\layout Subsection
- put a table in a list item?
\layout Subsection
- nest different types of lists?
\layout Standard
This is actually a question about nesting environments.
\layout Standard
If you know LaTeX, you've probably been grumbling that this *&!#@^!!$#!!
 program can't nest different types of 
\family typewriter 
\backslash 
begin{}
\family default 
 \SpecialChar \ldots{}
\family typewriter 
\backslash 
end{}
\family default 
 environments inside one another.
 Actually, LyX can; use the 
\emph on 
Change Environment Depth
\emph default 
 entry in the 
\emph on 
Layout
\emph default 
 menu or use the depth icon.
\layout Standard
If you have no idea what LaTeX is, but want to do something like this:
\layout Enumerate
This is example #1, first paragraph.
 Blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah
 blah blah blah blah blah blah blah blah blah blah.
\begin_deeper 
\layout Standard
Here's another paragraph.
 It's just nonsense.
 Boing boing boing boing boing boing boing boing boing boing boing boing
 boing boing boing boing boing boing boing boing boing boing boing boing
 boing.
\end_deeper 
\layout Enumerate
This is example #2
\begin_deeper 
\layout Itemize
item 1
\begin_deeper 
\layout Description
Example This is a description list example.
\end_deeper 
\layout Itemize
item 2
\end_deeper 
\layout Enumerate
This is example #3
\layout Standard
\SpecialChar \ldots{}
you also use the depth icon or the 
\emph on 
Change Environment Depth
\emph default 
 entry in the 
\emph on 
Layout
\emph default 
 menu.
 When we made the above example, making the first entry, we hit return and
 selected 
\emph on 
Standard
\emph default 
 from the layout pulldown.
 Then we hit the depth icon and entered the second paragraph, followed by
 the second list entry.
 Then we changed to 
\emph on 
Itemized
\emph default 
, entered the first bulleted item, and hit the depth icon.
 The 
\emph on 
Description
\emph default 
 layout was made in the same fashion.
 For the last numbered entry, we switched back to 
\emph on 
Enumerate
\emph default 
 and created the entry.
 The numbering came up correct automatically.
\layout Section
Other Questions [FAQ]
\layout Standard
\emph on 
None so far.
 David Johnson will soon [hopefully] be taking over this document.
 - jw
\layout Section*
Remainder of Document is Incomplete.
\the_end