NotePager Version 1.6.2

NotePager is a Shareware alphanumeric paging dispatch software.  Using a
modem, it will dispatch messages to alphanumeric or numeric pagers.  Messages
can be sent to one or more pagers.  The program requires the following
information before a message can be sent:
        1. Your pager service provider's modem dispatch phone number
           (often called their TAP dispatch line)
        2. The PIN/ID number for your pager.  You must also get this from
           your paging service provider.
        3. The modem settings to connect to their modem
                - baud rate
                - parity
                - data bits
                - stop bits
        4. The COM port of your modem (shared or network modems work fine)

You may freely distribute NotePager software, however if you wish to use it
beyond the 30 day trial period, you are required to register it.

How to reach NotePage, Inc.
        email   sales@notepager.net
        web     www.notepager.net
        phone   (781) 829-0500
        fax     (781) 826-3432
        mail    291 Rockland Street
                Suite 13
                Hanover, MA 02339
                USA


Installation Instructions:

1a. If you have the diskette or CD version, please skip to step 3.

1b. Copy the program file nprsv16.exe or nprsv16.zip (the registered version is
    nprrv16.exe) to a temporary directory.

2a. For the .exe version, execute the program.  This will decompress some files.

2b. For the .zip  version, you must decompress the file using a utility such
    as PKunzip or WinZip.

3. Run setup.exe from the disk, CD, or temporary directory.  The setup program
   will start and guide you through the installation.

4. Run NotePager


System Requirements: (minimum)
        Microsoft Windows (3.1, 3.11, 95 or NT)
        386 cpu  (486 recommended)
        4 meg of ram  (8 meg recommended)
        10 meg of free hard drive space
        1200 baud modem

Some Popular Modem Initilization Strings:

Some carriers won't need an init string, others may.

AT&FQ0V1X4&D2  -  Minimal settings.  Works with most 2400 or 1200 baud modems

AT&FQ0V1X4&D2N0S37=5  -  Works with many 14.4 and 28.8 modems.  Additional codes 
forces a 1200 baud connection.  Use S37=6 for an 2400 baud connection.

AT&FQ0V1X4&D2N0S37=5\N0%C0  -  Works with many 14.4 and 28.8 modems. Additional 
codes turnes of error correction and data compression.

AT&F0Q0V1X4&D2&B1&K0&M0&N2  -  Works with USR 33.6 and 56K modems.  Turns off 
error correction and data compression.  Forces a 1200 baud connection. Use &N3 
(instead of &N2) for a 2400 baud connection.