Flat Panel Display | |
12.1" full color active matrix LCD display with stereo speakers and overhead
projection capability | |
Electro-Optical | |
Pixel Resolution | 1024(x3 RGB stripe)x768 |
Color Resolution | 15-bit and 18-bit modes, user selectable (12-bit True + Frame Rate Modulation) |
Color Gamut | R: x=0.61, y=0.36 |
G: x=0.27, y=0.62 | |
B: x=0.13, y=0.11 | |
Contrast Ratio | 100:1, minimum |
Brightness | 80Cd/m2, minimum (at a transmissivity of 3.1%) |
Response Time | <50ms, maximum, rise + fall |
Viewing Angle | Horizontal: ▒45░; Vertical: +30░/-10░ (optimized for
12:00) |
Display Surface | Front: Anti-glare 3H hardcoat Rear: Clear 3H hardcoat |
Video | |
Interface to Indy | Single width option connecting to the graphics board's
video connectors generating 24-bit high resolution digital video to drive a flat panel display |
Camera | Indy Video'" and Cosmo Compress'" are not available when
IndyCam" is supported by Indy |
Stereo View Goggles | Not supported |
SimulScan | Not supported |
Audio | |
Interface to Indy | Serial digital stereo (IEC958, AES3) |
Output | Stereo, .6W per channel, 150Hz to 18KHz |
Microphone | Provided by the Indy mono/stereo microphone |
Control | IC interface supports control of speaker volume, back-light
brightness, tone, and stereo |
Power Requirements | |
Power | 30 watts AC plus 10 watts @ 5VDC for Indy adapter card |
Source | 110/220 VAC 50-60Hz |
Cabling | |
Display/Audio | Ten-foot, shielded, 34 twisted pair conductors, internal
connector at display end with separate audio plug at system end |
Power | IEC socket with removable 10' cable to wall outlet |
Physical | |
Size | Display: 12 3/4"H x 12 1/2"W x 7/8"D Base: 6 1/2"H x 12 1/2"Wx 11/8"D Total length folded flat: 18 1/2" |
Weight | 7 Ibs. |
Color | Gray Granite |
Hinge | Friction/clutch with 210░ rotation |
Backlight | User-removable light pipe assembly for use with custom OHP |
Carrying Cases | Flat Panel: Standard Indy carrying case includes pocket for
Corona and cables |
Desktop Stand | Integral base supports desktop use at O░ to 30░ tiit |
Operating Conditions | |
Temperature | 13░C to +35░C in direct view and OHP modes |
Relative Humidity | 10% to 80%RH, no condensation |
Non-Operating Conditions | |
Temperature | -20░C to +60░C |
Relative Humidity | 5% to 90%RH, no condensation |
Vibration | 0.02", 5-19Hz; 35G, 5-500Hz |
Shock | (20G, 11 ms, half sine wave X, Y, Z) |
Software | |
Boot PROM | Indy PROM includes Corona monitor ID and timing (early Indy
production may require PROM upgrade) |
System Software | Requires IRIX' 5.2 or later |
Software Control Panels | Audio panel controls volume, tone and fade Display panel controls backlight brightness |
Master Volume | Master volume controlled via Indy front panel switches |
Regulatory | |
Electromagnetic Emission | FCC Class A, Canada DOC Class A, ISPR 22 Class A, Germany VDE Class A, VCCI Class 1 |
Product Safety | UL 1950, CSA 22.2 (#950), IEC 950, EN 60-950 |
Ergonomic/Health | Germany ZH618 |
Overhead Projector Option | |
Equipment | Dukane MagniView Model 28A681 |
Operating Modes | Latches on top of projector locate and mount Presenter unit whose base is hinged to conform to projector front face; shows standard slides when Presenter not installed |
Optical | Combined 3-element standard/wide-angle projection lens |
Projected screen size | 3.5-foot diagonal to over 30-foot diagonal in suitably
lighted environment |
Brightness | 6,000 lumens from 575 watt metal halide source |
Electrical | 120V, 60Ftz Power Operation or 220/240, 50,60Hz Universal auto switching power supply for 47 63Hz, 90-250v |