**************************************************************************
**************************************************************************
README FILE FOR HPPCL5A PRINTER DRIVER VERSION 30.3.86
**************************************************************************

**************************************************************************
This README file contains the following information:
     * Installation Instructions * HPPCL5A Printer Driver Enhancements 
     * User Hints * HP Personal Peripherals Assist Line
**************************************************************************

INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY
ACCOMPANY THIS DOCUMENT (collectively referred to as the HPPCL5A
Printer Driver Version 30.3.86) IS PROVIDED "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE.  The user assumes the entire risk as to the
accuracy and the use of the HPPCL5A Printer Driver Version 30.3.86. 

The HPPCL5A Printer Driver Version 30.3.86 may be copied and
distributed subject to the following conditions:

1) All text must be copied without modification and all pages
   must be included;
2) All files on the disk must be copied without modification 
   (the DOS utility DISKCOPY is appropriate for this purpose); 
3) All components of the HPPCL5A Printer Driver Version 30.3.86
   must be distributed together; and 
4) the HPPCL5A Printer Driver Version 30.3.86 may not be
   distributed for profit.  

Copyright (c) 1990, 1991 Hewlett-Packard Company.  
All Rights Reserved. Univers is a product of; and Intellifont 
is a registered trademark of AGFA Compugraphic, a division
of Agfa Corporation. Windows is a registered trademark of Microsoft
Corporation.

**************************************************************************
INSTALLATION INSTRUCTIONS
**************************************************************************

To install the HPPCL5A Printer Driver:

1.  Start Windows 3.0. 
2.  Choose Control Panel from the Main Group in Program Manager. The
    Control Panel window appears. 
3.  Choose the Printers icon from the Control Panel window. The
    Printers dialog box appears. 
4.  Choose the Add Printer button. 
5.  From the List of Printers: dialog box, select the Unlisted
    Printer. Unlisted Printer is the last entry in the List of Printers
    dialog box. 
6.  Choose Install. 
7.  Insert the HPPCL5A Printer Driver Disk Version 30.3.86. 
8.  Double click on the installation drive in the "Directories:" list.
9.  Double click on HPPCL5A.DRV in the Driver Files list. 
10. Choose "New" when asked whether you want to use the current
    driver or install a new driver. 
11. The entry "HP LaserJet III on None, Inactive" will appear in the
    Installed Printers dialog box. 
12. Choose Configure. 
13. Highlight the correct printer port from the Ports dialog box. 
14. Choose Setup. 
15. Make any necessary changes in the Printer Setup window to reflect
    your printer's configuration. 
16. Choose OK twice. 
17. Choose Active. 
18. Choose OK.

The HPPCL5A printer driver is now installed.
    NOTE:  Any HP LaserJet III printer you have previously installed will
    use the new PCL 5 Printer Driver and Hewlett-Packard Font Installer. 
    Remove through the Control Panel any HP LaserJet III printer entries
    that are not needed.

To remove a printer from the Installed Printers List:

1.  Choose Control Panel from the Main Group in Program Manager. 
2.  Choose the Printers icon from the Control Panel window. The
    Printers dialog box appears. 
3.  Highlight the printer you want to remove. 
4.  Choose Configure. 
5.  Choose Remove. 
6.  Choose Yes when asked if you want to remove the printer. 
7.  Choose OK twice to return to the Control Panel.
    Until you exit Windows 3.0 and then restart Windows 3.0, the Printer
    Setup function from the Control Panel is accessed from the
    installation disk.  Make sure the installation disk for HPPCL5A
    Printer Driver Version 30.3.86 is inserted in the floppy drive
    whenever you request Printer Setup from the Control Panel after
    installing the new Printer Driver and before exiting Windows 3.0.

**************************************************************************
HPPCL5A PRINTER DRIVER SUPPORT CHANGES
**************************************************************************

*  The WordPerfect Bitmap Cartridge support has been removed from the
   30.3.86 driver.  The WordPerfect Cartridge can be added to the font
   installer by using either the AutoFont support disk packaged with the
   cartridge or by obtaining AutoFont support from the Personal
   Peripherals Assistance Line.

*  Changes to font symbol set references

   To provide WYSIWYG capabilities, Roman-8 symbol set bitmap fonts
   are now remapped or translated to the Windows ANSI set so that the
   screen matches the printed output.  This applies unless the fonts
   have been loaded using autofont support.  If autofont support was
   used to install the Roman-8 symbol set bitmap fonts, the printed
   output will match the documented Roman-8 character maps, not the
   Windows ANSI on the screen.

**************************************************************************
USER HINTS
**************************************************************************

On-line help files are included for the HPPCL5A printer driver and the
HP font installer screens.  Choose Help from these screens to access
the HELP information.

**************************************************************************
HEWLETT-PACKARD PERSONAL PERIPHERALS ASSIST LINE
(USA and Canada only)
**************************************************************************

You can call the Hewlett-Packard Personal Peripherals Assist Line
weekdays between 7 a.m. and 6 p.m.  (Mountain Standard Time), except
for Wednesday when the hours are 7 a.m. to 4 p.m.:  (208) 323-2551.
In Europe, call the Microsoft Customer Support line in your country.