***************************************************************************** Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) NDIS 2 Driver For LAN Server Installation ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Copyright (C) 2000 Linksys All rights reserved. ***************************************************************************** The driver named LNE100 contain in the directory NDIS conforms to the Network Driver Interface Specification (NDIS) defined by Microsoft/3Com. Content of the file ------------------- A. DOS LAN Requester Installation for LSP V1.30 to V1.37 B. LAN Server 4.0 DOS Client Installation C. OS/2 LAN Server 3.0 Installation D. OS/2 LAN Server 4.0 Installation E. OS/2 LAN Server 4.0 Installation (Multiple LAN Adapters) A. DOS LAN Requester Installation for LSP V1.30 to V1.37 ========================================================= 1. Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31 to 1.37) Diskette into your floppy drive (drive A: or B:). 2. Type the following at the DOS prompt and press : A:>dxmaid 3. The screen will display the IBM logo. Press twice until the "Environment Information" appears on screen. 4. Respond to the screen prompts, specifying the following values for each field: Use the to toggle between choices: Configuration for this computer? Yes Use existing configuration information? Yes Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Do you need 802.2 interface support? No Type changes as needed to drive and directory information below: Source for LSP A:\ Target for new configuration C:\lsp 5. Make sure that the values given above are correct. Press to store your choices. 6. Insert the Driver Diskette in your source drive. Specify the path and press to proceed. Examples: A:\NDIS\DOS, B:\NDIS\DOS 7. Upon pressing the necessary drives from the Driver Diskette are copied onto your target directory in the hard disk. 8. Follow screen instructions to complete the process. Simply pressing for each screen display will select the default options. Press three times, until you reach the display prompting you to insert the LSP diskette. 9. Insert the LSP diskette as prompted. Press to acknowledge completion of the action. 10. A screen showing the current configuration detected will be displayed. It should show: Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) and the protocols already selected (i.e., "IBM IEEE 802.2" and "IBM OS/2 NETBIOS"). 11. Press to save the new configuration. This completes the LSP installation. ************************************************************ * NOTE: * * * * You should have defined in your CONFIG.SYS a * * minimum of 20 files, i.e. FILES=20, to run the * * software properly. Change the FILES line using * * the text editor if needed. * * * * If installing LSP for the first time, you should * * complete the installation by typing install and * * following the instructions on screen. * ************************************************************ 12. Use a text editor to edit the CONFIG.SYS file. Specify at least 20 file in the FILES= line. Modify it to the following: FILES=20 13. Save the configuration and reset your computer. 14. Insert the DOS LAN Requester Install Diskette into your floppy drive. 15. Type the following and press : INSTALL 16. The IBM logo will again appear on the screen. Press to move on to the next screen. 17. Follow screen instructions, pressing to move from screen to screen until you are prompted to indicate the pathname of the DOS LAN Requester directory. TIP: After the IBM logo appears on the screen, press twice to reach this screen. 18. Specify the pathname for the DOS LAN Requester directory (C:\DOSLAN is the default). Then press to continue. 19. The program will ask you for the services that you require. 20. Highlight the appropriate option. Select either "Send messages" or "Send, View, Edit, and Log message" option. TIP: Normally, the second option "Send, View, Edit and Log message" is selected. 21. Specify the PC's ID and domain ID. The domain ID is the domain server ID; it should be the same for all workstations on the network. 22. Follow screen prompts to complete the installation. B. LAN Server 4.0 DOS Client Installation ========================================== 1. Under DOS environment, change directory to the LAN Server DOS Client subdirectory, that is, enter the following command CD \NET Note: \NET is the default directory name of LAN Server 4.0 DOS Client. Note: Before installing the LAN driver, you should install IBM LAN Server DOS Client first. 2. Type INSTALL and press to enter the DOS LAN installation program. 3. When the "Install for DOS LAN Services" screen appears, highlight the "the listed options are correct" choice and press . 4. On the second screen, you will see the following information: Machine ID, User name, Domain name,... and Network card information. Highlight the "Network card : No network card was selected" choice and press . 5. Select the first choice from the following two selections "Add driver for network card", "Driver configuration is correct". 6. Select "Network card not shown in list below ..." from a listing of network adapters on the next screen. 7. Insert the Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) Driver diskette into drive A: and specify the path of the driver installation file (OEMSETUP.INF) by typing A:\NDIS\DOS and press . 8. Highlight "Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)" and press . 9. If necessary, choose "Edit settings for network card driver", otherwise choose "Driver configuration is correct". Note: Please see NDIS.TXT for the parameter settings. 10. Highlight "The listed options are correct" and press on the next screen. 11. Then, the Installation Program will ask you to insert the DOS LAN Services Disk 1. Be careful, do not follow the screen instruction here, that is, you should not insert the DOS LAN Services Disk. All you have to do is press and wait for installation to complete. 12. Remove the diskette from driver A: and press to restart the machine. C. OS/2 LAN Server 3.0 Installation ==================================== 1. Copy LNE100.OS2 and LNE100.NIF files from your Driver diskette (A:\NDIS\OS2) to C:\IBMCOM\MACS. 2. Click the OS/2 LAN Service icon. 3. Select "Installation and configuration." The IBM logo should appear on screen. 4. Click . 5. Select and press . 6. Select "Install or Configure this Workstation." 7. Select server type, adding a server or domain controller. The "install or remove" selections should appear. 8. Select "Configure a component." 9. Click the "Configure" button. 10. Select "Configure workstation." 11. Select "Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)" when prompted to identify you Network Adapter, then click the button. 12. Select "802.2" from the list and click the button. 13. Select IBM NETBIOS from the list and click the button. 14. Select to confirm all selections. 15. Follow screen instructions to complete the process, selecting to accept default selections. 16. Continue pressing until your screen prompts you to backup old CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS and AUTOEXEC.BAT. Also select to confirm this. 17. Installation is complete now. Reset your PC by turning it off and on. D. OS/2 LAN Server 4.0 Installation ==================================== 1. In OS2 desktop, click the MPTS (Multi-Protocol Transport Service) icon. The IBM logo should appear on screen. 2. Click the button. 3. Click the button. 4. Select the "LAN adapters and protocols" item, then click button. 5. Click button. 6. Insert the Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) Driver Diskette into a specified drive (A: or B:), then enter the driver path like A:\NDIS\OS2, (or B:\NDIS\OS2, etc.) and click button 7. Select "Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)" from Network Adapters list when prompted to identify you Network Adapter. Then click the button. 8. Select "IBM 802.2" from the Protocols list and click the button. 9. Select "IBM OS2 NETBIOS" from the Protocols list and click the button 10. Select "IBM NetWare Requester Support" from the Protocols list and click the button if you need to logon NETWARE server. 11. Select to confirm all selections. 12. Click button in the Configure window. 13. Click button in the MPTS window. 14. Click button, then your screen will prompt you to backup old CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS and AUTOEXEC.BAT. Also select to confirm this. 15. Installation is complete now. Reset your PC by turning it off and on. E. OS/2 LAN Server 4.0 Installation (Multiple LAN Adapters) ============================================================ For multiple adapters installation, you must do the following: a. configure b. configure a. Configure --------------------------- 1. From OS/2 desktop, click 2. In LAN Services windows, click 3. Click when the IBM logo appears. 4. In "Basic or Advanced Installation/Configuration" dialog box, click 5. Select "Install or configure this workstation" in "Installation Tasks" dialog box, and click 6. Select Server Type (like, Domain controller) then click 7. Select "Configure a component" from "Installation and Configuration" dialog box, and click 8. Select "LAN Services Adapters" from "Configure" dialog box, and click 9. Select the LAN adapters to be used by LAN Services (for 2 adapters, select Adapter 0, Adapter 1) and click 10.Assign the NETBIOS Resources like Sessions, Commands & Names (you can use the default value) and click for different adapters. 11.Click in the "Configure" dialog box. 12.Select "Apply the changes" and click in the "Installation and Configuration" dialog box. 13.Follow screen instructions to complete the installation. 14.Shut down and reboot the machine. b. Configure ------------------- If you have more than one adapter, you need to configure each of them for different Slots by clicking in "Configure" windows. ******************************************************************** * NOTE!! * * * * Each slot represents a PCI adapter index value for one * * adapter installed (LNE100) in this case) * * assigned by the PCI-BIOS. For example, if the 1st slot is * * assigned slot=1, then the next slot will be assigned * * slot=2, the third slot=3 and so forth until the last slot * * * ******************************************************************** All trademarks or brand names mentioned are properties of their respective companies.