Here's a brief summary:
Put the HP-48 in Kermit server mode. Set up the Kermit client like this:
SET PREFIXING ALL ; (C-Kermit or Kermit 95) SET MODEM TYPE DIRECT ; (C-Kermit or Kermit 95) SET PORT COM1 ; (Or other communication port) SET SPEED 9600 ; (Serial port speed) SET CARRIER-WATCH OFF ; (Don't require carrier) SET FLOW NONE ; (Don't use flow control) SET PARITY NONE ; (8 data bits, no parity) SET BLOCK 3 ; (if desired, or 2) SET CONTROL PREFIX ALL ; (Necessary in Kermit 95)
For file transfer, use binary mode unless you are exporting or importing HP-48 objects:
SET FILE TYPE BINARY
To transfer files:
SEND filename ; Send file(s) to the HP-48 GET filename ; Get file(s) from the HP-48
To change directory on the HP-48:
REMOTE HOST { relative_directory_name } EVAL
To shut down the HP-48 Kermit server:
FINISH
If file transfers fail, try:
SET SEND TIMEOUT 20 ; (Or other number of seconds) SET SEND PAUSE 100 ; (Or other number of milliseconds)
CLICK HERE for further information.